Vodyane pidloge scorched. Electrical heat supply

We don’t live in Africa, but in some other country with a sweltering climate, all kindly understand that after heating up the butovyh, office and other common places, they will be deprived of actual food at the objects that will be. The main place for a be-like a person who would like to rest in an atmosphere of comfort is that calm, obviously, it’s a donkey.

There, a person grows up, speaks out of his own family, he himself will make a majestic injection and on those, like a person who works.

Alternative scorching

In order to achieve maximum comfort in the premises and at the same time save on the payment for the scorching of the plant, the people were able to develop the awareness of the scorching and new and new forms. Today, it is no longer a role of both the main and additional alternative scorching.

The scorched podlog was found to be even more efficient and ergonomic method. The principle of robotics of the system polagaє at the building of warm weather rises uphill. Coldly, turning your blackness down, and, warming up on the surface, rise again.

There are three main advantages over classic wall-mounted radiators:

1. Rivnomіrne razpodіlennya heat flow on vsіy surfіnі pіdlogі vіdpovіdno іn primіshchenniu. Classically scorched with radiators fixed on the walls, often flooded with cold weather.
2. Povna bezpeka, through the presence of direct physical contact with baked surfaces.
3. The idea of ​​shovat komunіkatsії pіd pіdlogu gіd іn great new opportunities for design vіdkrittіv vіrіshennyі іnter'ієru prisіshen'.

Note!
It is less important to lie one factor - the installation of that connection Opal system For better reasons, trust the professionals, as they give a guarantee for all kinds of services.

scorching systems

The most demanded today are two heating systems:

• Electric.
• Vodyane.

This and the other type of alternative scorching may have its own advantages and shortcomings, as well as recommendations for stagnation in fallow land due to their main character.

Electrical heat supply

The system of electric heating, which is easy to install, is the most accessible for any kind of laborious work of all robots with their own hands. It is more important that the heat supply kits include a report instruction for the installation and adjustment of the system.

At this moment, the first wave of economy is planned - you will pay less for the necessary benefits. In addition, it is similar to the scorching in the apartment, it is significant to change the volume and height of the space, so that the entire technological ball is borrowed literally 3-5 cm at a time with a cement screed, which is curved.

The electrical state of the scorched can be two different:

• Cable (maє vomogi until I become the foundation - smoothness).
• Plivkove pokrittya can be laid on an unprepared base that does not require additional stains for the repair of the underlay.

Pratsyuє i that i іnshiy type elektroobіgrіvu pіdlogi for rakhunok heating the main element with electricity, which is given. Thermal energy from heating cables or thermofusions is transferred until the cover is thin.

Respect!
Mayuchi in its order heating elements on the surface of the pads, whether it be cables, smelting or pipes of water scorching, warto remember about the zone of neobov'yazkovogo, and sometimes non-bazhzhany heating.
Up to such places you can see the surface under the refrigerator, furniture, built-in large-sized equipment.

water scorch

This method of scorching the pipes is controlled by the pipes:

• In a spiral.

• Looks like a snake.

In the role of heat transfer in a similar system of scorching, hot water circulates behind the pipe system.

The heat conduit is connected to the heat transfer station:

• Gas cauldron.
• Electric heater.
• Cauldron on solid fire.

Water circulation at the system is secured with the help of a special pump.

Such a number of achievements:

• Hopefulness.
• Durability. With the appearance of polymer pipes, the term for the service of the water system of scorching is different.
• Cheap exploitation.

Before the shortfalls, you can see:

• Compliance with installation. As we have already said, it’s a good idea to ask for a fahіvtsya.
• It is a remarkable technological community to rob the scorching ball with an important and undersized stosuvannya in apartments with a standard low height of the beds.
• Takozh water system the heat of the log is important to regulate.

Incineration systems

One of the oldest ways to heat the place is to rediscover it. Today, similar systems of scorching stagnate in large, virobniches and other premises. Sound from the central scorching, later from the heat-exchange tidal ventilation.

Vіdomi takozh vipadki vykoristannya povitrya living booths. Mіstseve povitryane scorched pіdlogi zdіysnyuєsya heat up. in a different way(with heaters, thermal harmats) I will repeat, as if for the help of a fan it is taken from the premises and after heating it turns to a new one.

Visnovok

You didn’t choose any kind of scorching, you need to remember about the dotality of vikoristannya chi chi іnshої system in your booth. If it’s cold to come into the apartment on a cold day, then the heat of the cold, obviously, heats up the room, but spend heat, then, and increase the electricity. In the video presented in this article, you will find additional information on this topic.

At the same time, it is already obvious that the price of energy supply and nadal is increasing. To that, food came before the stingy man: how to spare your scorching on the vartos? Obviously, the construction of the booth is insulated, plastic windows solve the problem of heat loss, and more importantly, the correct installation of water scorching. When scorching your booth, you can choose one of the types of water scorching:

• radiator;
• plinth;
• warmth of the podlog.

In the private sector, in your own booth, the choice of scorching is always different, so that the installation is planned on the cob of everyday life and can be easily installed easily, whether it's some kind of scorching. At the ordered house, especially with the classic plans, it is already installed radiator not scorched. It is possible, obviously, to re-dominate the system, but if necessary, take it from the ZhKG, re-lay the bottom.

What is the warmth of the pidlog?

Pіdloga z pidіgrivom - tse not vіdkrittya of our century. Similar design of the system is based on Ancient Rome, where special channels were laid at the palaces, they went hotter. At our hour, a bunch of warm weather was “fashionable” to install in kitchens and bathrooms. This is explained by the sighing from the bottom, which brings the summer period to a cold one, then you can see the heat conductivity. Today, there is no room for laying the lower heating, the professionals have learned how to mount the pipes for any stately cover. And, regardless of those that the parquet is growing, linoleum is being worn out under the influx of heat, nobody is particularly worried about this drive, everyone continues to plan the installation of the lower pipe in their booths.

The most important thing for the lower pіgіrіv is that the robot is as big as the battery. The heating area of ​​such a bottom gives a superior advantage in parity with other types of heating.

Methods for installing sublogs with heating

Selection of sublogs for heating the surroundings in two ways:

1. Pipes from heat transfer fluids.
2. Electrical cable.

Headache in the installation electric cable- Simplicity. You can lay a cable to a depth of 1 to 3 cm, whether it be a wake-up call, or you can install an electric generator with your own hands, as you can see, even if it’s a trifle, you can use it in electricity. Tim more, you can know the installation options, whether it be the state, on the video reporting instruction by installation.

The axis will only be expensive to operate an electric sub-log. The water bill is economical.

The installation of a sub-log with heating in the form of water scorching is foldable and requires an exact fit of the singing scheme. In order for your underlay to function correctly, the binding of the mind - installation of a screed on concrete or an increase in surface underlays by 7-10 cm. You can't do without professionals here, especially as it is planned to install it on the whole area of ​​the apartment. Incorrect installation of such an installation option can lead to a deplorable result: you will blow a fire near the scorching system along the entire perimeter of the booth.

To that pipe with heat transfer will already be walled up in concrete. Choose a pіdlog with pіdіgіvom better in the fallow land in the area, so you need to warm it. So, if the application, which is heated, is small beyond the scope, then it will be obvious that there will be an electrical connection. And as a matter of fact - heat the whole house, then it’s better to protect it from the water scorching. One of the minuses of the lower pipeline with heated water is the installation of a pump, the heat-carrying chips will not flow through the pipes.

Naygolovnіshі perevagi bottom z pіdіgіvom on water scorched:

• Visually invisible all scorching accessories.
• Heating from the bottom is visible along the entire perimeter, where the pipeline is installed.
• Possibility of heating great squares small cats.

Nedolіki bottom z teplosієm vіd vіd scorch water:

• Impossibility of curing by the temperature regime of scorching;
• Falling vice at the riser;
• Mozhlivist prot_kannya that difficulties її poshuk;
• Foldable installation;
• Zaboroni ZhKG

Yak vlashtovana pіdloga z pіdіgrіv

As a matter of fact, the lower water pipe has its work - the battery is walled up in the basement, the heat carrier is fed into the yak. The heat-carrier gives heat to the material of the pipes: concrete, aluminum plates, sand. Then the heat is transferred to the main cover at the bottom, from the other surface the heat rises uphill, warming the room.

The scheme of the lower pіdіgіv polagє:

• іz teploіzoljatsії, yak piping pіd trumpets, schob heat did not go down;
• polyethylene slinky;
• reinforcing meshes;
• pipeline;

• concrete screed;
• pidloge cover.

As you have some small new beginnings in everyday life, you can try to install the warmth of the bed with your own hands. It will be easier if you know the photo - instructions for installation. Obov'yazkovo when installing the lower pipe, follow the instructions:

1. A heat-insulating material is laid on the back: foam plastic, foam plastic. Zavdyaki tsim materials warmly do not go down.
2. A line is laid to compensate for the expansion of the heat of the screed.
3. Fittings are installed, pipes are fixed on the new one.
4. The pipeline is being restored. You can choose whether the form of laying: snake, mushli, ale, if you look at a photo, you will rather lay it in a spiral.
5. Three meters one meter behind the help of special clamps, the pipes are installed to the fittings.
6. It is closed in the collector, which supplies water with one set of pipes, the next to the collector.
7. After the completion of the work, the system is launched, in order to review the practicality and reveal the possibility of failure.
8. If the system functions without problems, then the installation of a concrete screed from the bottom with a height of 7 cm should be done.

When installing pidlogs, it is necessary to ensure that the linoleum, laminate screed is laid thinner, the concrete screed can be tiled. Such installation is due to different thermal conductivity of the material.

The scorching near the apartment to a private booth is, obviously, a plus, and the presence of the rest is a minus, you can’t put up with it. However, be it a heating system, molded with a twist from electrical appliances, it includes a heat transfer element - a pipe.

The old looking pipeline can be called aesthetically pleasing, so the hairdressers of the inhabitants koristuyutsya whether it is possible to grab yoga from the eyes.

Installation methods

• Vidkritiy - the pipeline is laid along the perimeter of the room from the radiator to the radiator. This is a traditional solution, but far from being the best. First, such a method conveys impersonal strength, which is costly to finish. In a different way, they seem to be victorious plastic pipes scorched, then part of the reinforcement will not be hard to compensate: on old-fashioned tse signified very negatively. Thirdly, the molding of the collector type of distribution is switched on again, and it is easy to place such a pipe line around the apartment.
• Attachment at the wall - for laying the scorched, it is necessary to gouge the walls. Tse vazhka that "brudna" robot. It is also necessary to transfer heat insulation, to that in which case the heat from the scorched pipes is transferred to the material of the wall and for heating the room is not beaten. However, the method allows you to use the most convenient communications and know about compensation for thermal expansion.

• Attachment installation at the entrance - may have its pluses and minuses. You don’t need to sound at the strobe, if you want to win in Novobudov and such a way. Perevagoy can be used to insulate - the pipeline can be adequately protected with plastic corrugation. The roses will be warmly transferred to the material and the logs, so that all one wins for heating in the apartment. Nedolіk є nebhіdnіst yakim rank to secure access to the place of z'єdnán for repair and for a prophylactic look around. In the photo - the working moment of laying the pidlog.

Budova sublogs

At Novobudovі pіdloga є zalizobetonnym_zhoverhovymi overlaps. What can be installed on the verge of scorching in the pit, only if a concrete screed is sporadzhuetsya.

At a private booth in that old apartment, you can see another solution: a log on the logs. In this way, pipelines are placed under cover without any problems. Bezperechny plus - access for repair and look around. Not less perevagou є i mozhlivist vikoristovuvat whether you see water conduits.

Trumpet scorched: different

Varto designate, scho zgіdno zі SNiP, to the heat point can be installed only metal pipes.

Rolled metal products: pros and cons

When installing heating systems, steel conduits are installed - black and galvanized. The remaining significantly greater protection against corrosion and are characterized by a smooth inner surface: the working diameter is practically not changed by the year. At Novobudovі connection to central scorching Get ready for the help of black steel pipes.

Advantages:

• high spirituality;
• resistance to pressure drop and hydraulic impact;
• an even lower expansion coefficient;
• longevity.

Noodles:

• steel pipes and scorched pipes are laid only in a straight line, fittings are used for forming bends;
• galvanized steels save their strength only with a threaded joint, shards are made from a rubble ball to zinc;
• installation at the bottom of a concrete screed using such security entrances, which are the same when using plastic screeds.

Metal-plastic pipes

Immuring them in concrete is also unacceptable. SNiP describes the laying in the next step: a metal-plastic pipe is placed in a metal sleeve of a larger diameter, and then the system is mounted. In this order, space is secured when expanded. Judging by the findings of the coristuvachs, this technology is not always available.

Advantages:

• smaller vaga, and, later, simple installation;
• high working temperature - +95 C;
• the possibility of laying under the hood without additional suitable elements.

Noodles:

• high quality;
• when installing in the sublog, it is necessary to use only press fittings. Compressors dryly use tightness;
• the place for the payment of guilt must be accessible for inspection.

Plastic reinforcement pipes

The widest range of current options, judging by the findings, is polypropylene conduit and pipes for scorching from cross-linked polyethylene. Remaining temperature of heat transfer is up to +110 C. Installation of risers from polymeric conduits according to SNiP is not recommended.

Reinforcement with fiber and fiberglass significantly reduces the coefficient of thermal expansion. At attached to the installation change, yakі all the same vіdbuvayutsya, priymayutsya material statі and do not give infusion. Pluses and minuses of the following:

• it is possible to lay down a pіd be-like a pіdlog;
• the pipeline is ventilated by bending, installation is carried out behind a folding circuit;
• does not require thermal insulation;
• material is dielectric and requires additional maintenance.

Today, one of the ways to transfer thermal energy, which are considered during the installation of the scorching system, is the choice of ordinary heat transfer fluids. Tse can be water, antifreeze, antifreeze. The heated countryside transfers heat to the pipes and radiators, as they heat up, increasing the temperature in the room.

The scorching trumpet is accepted to be installed in the following ways:

1. Vіdkritiy sposіb. To the new one, there is a classic scheme of scorching in a booth or an apartment, as it is folded from a riser (vertical pipes, their number can reach 8 pieces on the pіd'їzd at the apartment booths), a scorching radiator (the number of deposits in the area of ​​​​application), as well as faucets, fittings, fittings, fittings fixing pipes and radiators. Pipeline roztashovuєtsya vzdovzh stіn and zv'yazuє mіzh itself riser and radiator.
2. Closing method. May be on the verge of laying the scorched pipeline in the walls or in the underside. The trumpets can be brought to the radiators, the trumpets are more equal to the pidlogs, so I will be the same to the surface. Close the pipes leading to the radiators to be more aesthetic in nature and do not affect the temperature in the room through their small area.

Zupinimisya in a closed way, and we can look at it in a way that is not enough.

Positive aspects of closed installation

Equal heating and economical benefit. These characteristics can be seen only up to a non-radiator system, which is mostly attached to the bottom.

Warm up again in the chosen season. The highest temperature is at the lower part of the site. It is necessary to warm up the very zone of the people’s well-being, which is economically viable classical scheme. Seeing, climbing the mountain, reaching what is dear to the body. It is important to remember that the legs need to be trimmed in warmth, in the head in the cold.

So, with the help of savings, you can install a thermal cooler and pay for the rahuka for scorching before the first reading. Such an installation is relevant only for modern days, in which there are horizontal distribution of the heat supply system, if the pipes from the central riser are dispersed from apartment to apartment. In case of vertical splitting, it is possible to install air conditioners on the skin radiator. In this situation, installation is connected with great windows and is rarely implemented in practice.

In the traditional system of scorching, the heating is placed on the side, in the walls, on some of the radiators. Progressively warming up, again reaching the highest temperature under the wall, so there, in the sky, you can’t consume. It takes more than an hour for the animal to warm up, and it takes more than an hour to heat up the thermal energy. Deyakі perevagi in tsomu vipadku mayut pіschennya z low stele.

Number of radiators, although it is not significant, but more space for accommodation. Additional space for furnishing is needed. Appointment wins over the starry look. There is no need to attach risers and pipes that go along the walls.

Just blow a trumpet in the near future, and the radiators are left on the walls, the effect of the closed rosette will be a trifle smaller.

Temperature closed installation zavzhdi pluses. It is acceptable to walk in the new, children can grow on the slopes, without the risk of falling ill. You can vimknuti, for consumption.

Minuses roztashuvannya scorched pipes in pdloz

If necessary, open the door for installation, for example, for installation wooden structures, can blame the difficulties. Robots need to be carried out carefully, krim singed pipes. In order to turn off such situations after laying pipes, it is the fault of the laying of the scheme for their installation.

Problems associated with possible repairs can become a barrier for laying pipes near the pіdlozі.

It is not easy to see the lines when laying closed. The first її sign є wet patches on the ground. The stench can be left unmarked under the finishing coats. The diameter of the flames varies depending on the location of the term and the opening in the pipe. How to achieve a great rozmіr, to bring out the tekti smoothly. If there are obvious signs, leaks in the system can be commemorated by falling pressure (pressure gauge readings) or by wet walls and sweats on the lower surface.

After the manifestation of a heat transfer cycle, it is possible to complete the laborious process. It is necessary to remove a part of the finish coating, carefully open the defect, install a coupling or replace a part of the pipe. After the next repair, I will be filled with a new one. And yet, after all the manipulations, there is a risk of leaking, so that the system can now be broken. That is why it is necessary to replace the entire contour.

When repairing pipes, laying under wood, the process is not so laborious, if you want to clean up finishing touch get it anyway.

Possibility of replacement without a rosette, as a rule, to flexible pipes (sewn polyethylene, metal-plastic) and it is only suitable for replacement, if a couple of pipes go to the skin radiator from the collector.

Replacement can only be done for such minds: the pipe is scorched laid in a corrugated pipe, the length of the pipe is no more than 10 m, the corrugation is not crushed by a screed, the number of virgins is minimal, and its radius exceeds 10-12 pipe diameters. Daniil taken away with the help of a way that can be a mother of resurrection.

• Vishcha vartist at por_vnyann_ s traditional installation scheme. Vitrati zbіshatsya at 5-10 times. Kіntseva tsіna stale in vartosti material and vykonuvannyh robіt.
• Thermal heat, which is taken only during heating, is heated and without wall heating and can be used for heating the room. Chi warm up the trumpet for the whole room? How effective is their thermal insulation? Why is the temperature sufficient to warm up more than in the pipes at the bottom, for example, outside the window 40-50 degrees below zero? On the power supply, you should know the requirements before installation.

Also, up to a short time of installation, in a closed way, it is possible to increase the height of the footprints from 8 to 13 cm, and the complexity of the installation at the premises, where people live (you will have to add more space to the furniture).

Vibіr on corrosiveness roztashuvannya pipes at pіdlozі

The temperature in the booth, the apartments of the other people who live in the house, are poured into the comfort and comfort of the new one. The choice of the right suprasystem of scorching can only be worked out with a detailed examination of all aspects of nutrition.

Yakshcho vybіr srobleno to the savagery of the closed system, following the vengeance of respect on the step:

• When installing, select the possession of an overhead picker. Savings can come from the problem of operation and repair from the future.
• Before installation, a waterproofing layer is carried out, and a damper line is laid along the wall, which compensates for the expansion during heating.
• Dovzhina contour is not guilty of revisiting 100 meters.
• At the closed zone (screed, wood pidloga) the fittings are not to blame.

Dotrimanya tsikh minds to help solve the additional vitrates and problems with the operation of the scorching system.

In our hour, no one is welcomed by a warm weather. They are massively installed in living quarters, in office premises, and in working enterprises. Although, until recently, the smell of pigrim sporadzhuvaetsya most often in the bathrooms and front rooms, now the stench has moved to the kitchen, and to the toilet, and to the bedroom. The heat of the podloga is not less than comfort and calm. The most significant part of the scorching system, which, before that, pleasantly blends into the home microclimate. Not only that, when you get up from your bed, walk around with warm floorboards, the stench will heat up the whole house, helping to help your great radiators.

The warmth of the bed - comfort and practicality

(Dzherelo illustration: bigbuzzy.ru)

The most popular type of state support is the water system. It is folded from flexible empty hoses, which are installed directly into the concrete screed or under the flooring and connected to the main scorching system. The water, which is at the empty hoses, is heated and circulated through the loops, giving its warmth to the state cover.

Hello, I would like to tell you about an alternative system for heating sublogs - electric. Vaughn, although she did not take away a wide zastosuvannya, but is characterized by even more positive results. I'll try to briefly tell you about the main features of the electric state power supply, its positive and negative aspects. In this manner, you can recognize all the necessary information and accept optimal solution how to choose a system for heating sublogs.

Water pіdіgrіv pіdlogi - the widest

(Dzherelo illustrations: ksportal.ru)

The electrical heating system is composed of special heating elements - cables, heat and string. The main feature of their functioning is the transformation electric struma have warm. Elements can be heated up to a temperature of 70 degrees, and additional materials (insulation shell) can have high heat resistance (over 100 degrees). Overhead, the system is assembled from a number of storage parts: heating sections, materials for easy and quick installation (mounting lines, plastic corrugations), a heat-insulating ball, a thermostat and a temperature sensor. All this "beauty" is installed on a black coat, comes to the electrician's dzherel and is fixed in the necessary position by pouring a concrete screed or a lag.

The basis of the electric power supply

(Dzherelo illustrations: yalta.olx.com.ua)

Before the cob of the installation of a state electric pipe, it is necessary to carry out a relay of heat engineering installations. According to the result of these investigations, to lay down a selection of suitable materials and the system to improve the logs. In the analysis of the next step, the type of the final article covering is to be determined (for example, a tree ceramic tiles), rozmіri primіshchennya, tovshchina pіdlogi, optimally admissible amount of vicory electrical pressure, heat-insulating power of application and others are not less important factors, as they know fakhivtsy.

For materials, the electric heating pipes are subdivided into cables and heaters. Cable electrical systems are made up of special double-wire cables, which, under the influence of electric power, are heated to the required temperature, providing heat to the static cover. Plіvkovі systems are made up of flexible shears, made of composite materials and are based on the principle of infrared promіnennia. Sound the stinks are prepared like thin mats - spitting. This is the name of the shearing system, as it goes in itself water and electricity. At empty hoses, which are designated for filling them with water, heating cables are placed behind them, which heat the homeland for the additional transformation of electricity into heat energy. Wtіm, these systems are a novelty on the vіtchiznyany market and vikoristovuyutsya from butі vkrai seldom.

Gnuchki shears are wound from composite materials

(Dzherelo illustrations: repairmaker.ru)

Headlines of electric power supply systems.

Electric state singed, vtim - like be-like electrically scorched, due to high productivity. Such systems heat up quickly and transfer heat to the premises, at which they convert 100% of electricity to thermal energy.

Electric heating supplies are not allowed to be folded during the hour of installation. The stench doesn't connect to central system scorched, not to water communications. Everything that is needed is electricity. In this way, it can be assumed that the costs for the installation of the electrical sub-log are not high, but are equal to the water system of the state subdivision.

Shards of electrical mothers, strings and cables are sold already ready-made, which will definitely simplify their direct installation. heating elements fixed with special materials for easier installation (nets, stitches), as the placement is resolutely secured to transfer to tension and heating power. The roll on the surface is left too loose, fixing it with a creaking material (adhesive patching) and proceed to further work on laying the paper cover.

Install an electrical sub-log - as easy as shelling pears

(Dzherelo illustrations: postroy-sam.com)

Shards for sale use ultra-thin electrical systems, which can be installed without a screed without intermediary under the cladding. This fact is even more positive, especially when repair robots. In addition, since the electrical connection does not transmit the presence of additional control elements (valves, pipes, heaters, then a small temperature sensor with a thermostat can be placed in some kind of calm little place and the stench is not psuvatim hot interior acceptance.

Porіvnjano z water pіdіgіvom, elektrichnі systems bolsh stіykі to mekhanіchnіch poshkodzhenі - vіdnіstі vіdzlіvіst vіdnіstі vіdіkannya іnshі nepriemnymi naslіdkіv prichinennyh trіvalієєyu ієyu і іnshimi іnshimi phyzichnimi faktory.

Electrical sub-logs do not allow the visibility of bulky control systems

(Dzherelo illustrations: www.ura-remontu.ru)

Ale, as it seems, at the skin barrel of honey there is a drop of tar. The electric heat of the sublog is not a fault. Regardless of their songs, the stench still seems to be short.

In some depressions, severe exhaustion, as if building a supply of electrical heat, it may not be enough to cover the heat loss in the premises. The sublog cannot be too hot, the shards can be significantly folded over according to them and can lead to the deformation of the official cover. Once again, I respect you - in order to avoid such incidents, it is necessary to carry out heat engineering relays. Only correctly predicted results will help to sporuditi effective system statutory heating, creating an optimally comfortable temperature regime for the host.

Bagatioh people to call important food - why don’t you need the warmth of the furniture? Psuvati that wine is not psuvati, but the effectiveness of the increase in the different manifestations of the richness of the objects of furniture, installed without lowers directly on the statuary cover, will significantly reduce the effectiveness of the installation. Seemingly simpler - a wardrobe or a sofa without legs will take your own heat, it is recommended for showing in the room. In order to avoid such a trick, try to think over a plan for the placement of furniture according to the premises and leave the quarters of the house insulated. Abo - let's take care of the furniture on high legs, so that again, what is warmed up, could freely circulate.

Furniture without lowers significantly reduce the efficiency of the electric power supply

(Dzherelo illustrations: murakami.com.ua)

Chergov's nettle dogtyu - vibir tax cover. It's not a secret that all systems of underfloor heating miraculously function at different levels of visibility from ceramics or stone, as they themselves are miraculous conductors of heat. To the right of the tree on the right is a trifle girsha. Ale, the modern electricians of electric pidlogs have proved their particularity and now your parquet or laminate in the living room can also be heated up effectively, like a shower in the bathroom. Ale, obviously, not so fast. Until then, choosing the cover for the sub-log, you should carefully familiarize yourself with the orders - perhaps the same type of cover is not intended to be installed over the state heating system. Incorrectly selected cover will not only provide you with the necessary temperature on your surface, but if it is poured, it can significantly harm you. So, hulks, be careful when choosing materials.

The best electric power supply is true to yourself in the company of ceramic tiles

(Dzherelo illustrations: vopros-remont.ru)

I stay. Oskіlki vartіst elektroenergії in our country it's high, next to think about the installation of electric heating. Else on the right, as you have no other ability - the same electrical system is the only right decision. In a different way - remember that the water system supports the sub-logs from the point of view of the sky significantly saves.

Platonov A.I.