Plastic pipes for ventilation. Wimoga, but chi is not a blessing. Advantages of winning plastic surgery

The ventilation system is an obov'yazykovy element in any private booth or apartment. Zavdyaky robotic hoods to the apartment come fresher and do not accumulate unpleasant odors. Like earlier everywhere ventilation pipes were prepared from metal, then the era of plastic came at once. Plastic pipes for ventilation more nadіynі and dovgovіchnі v vikoristanny, lower metal analogues The installation of such devices is less labor-intensive and significantly less costly.

The largest expansion of the perimeter is 150 mm. Plastic pipes were demanded not only from a private booth and office premises, but also from industry. At the same time, the possibility of installing them in important places was added.

Change of statistics

Variety of plastic pipes

According to the type of cut, plastic pipes for drawing at the booth are divided into straight and round ones. Rectangular pipes may prevail over round counterparts in ease of installation and installation on the dachas. And if there are more applications for, then it is better to choose a pipe of 150 mm round cut. Povіtrya in the kitchen is often full of particles of fat, yaki can settle on the walls. Rectangular veins are most often clogged and subject to regular cleaning.

According to the material, the following types of pipes are distinguished:

• propylene. I can find stamina to aggressive speeches of the middle plastic pipes, so they have a high mіtsnіst, which allows them to serve for over 25 years;
• polyvinyl chloride (PVC). arc light, resistant to ultraviolet changes, and smut more airtight;
• polyurethane. So, just like PVC, they are easily installed in important places, can be chemically resistant and can be easily worn.

All refurbished materials are environmentally friendly, both for people and dovkilla. Ale є deyakі obmezhennya for vikoristannya at primіshchennyah with high temperature. At spas, saunas, it is more important to install 150 mm.

On vіdmіnu vіd іnshih plastіvіv, pvіv іn't know deformії іn sharp fluctuations in temperature. Today you can drink like at a private booth, as well as at shopping centers, fitness rooms, cafes and other places.

Why do ventilations have plastic pipes?

Without a doubt, the main advantages of the plastic drawstring system are softness, constructive simplicity, ease of transport and the ability to pick it up with your own hands. Particularly worth the cost is 150 mm, made of PVC.

New transfer of transfers:

• maybe, the head power of plasticity is yoga total resistance to corrosion processes. Because of the supply of plastic systems, the designer does not need to worry about those, how to protect the trumpets in the air;
• plastic cost is inconspicuously cheaper;
• installation of plastic pipes does not require special tools for metal processing and can be done with your own hands without hiring specialists;
• plastic is not static, which makes it impossible to attract the particles of the saw to the walls;
• can have an aesthetic look and can vary according to color schemes. So you can choose the trumpets for the individual features of the interior;
• does not require special supervision, it is easy to brush and clean.

Noodles:

• The fire resistance of plastic is already low, so PVC pipes cannot be installed in fire-safe places, where contact with hot fire is possible. Through the polymers melt without the possibility of renewal;
• not the same metal, like a mill, made from aluminium.

Wash away the blockage of plastic pipes

Ventilation from plastic pipes can be used in the future with foldable architectural features, but for such a stop there will be a need for precise ventilation and fitting for the task of expansion. For use with greater circulation obligations, it is necessary to vicorate the trumpets of the great recirculation, as well as for the most important living quarters, a private booth, to run a pipe with a diameter of 100 mm, 150 mm.

Plastic pipes vicorist in the minds of natural, forced and wet ventilation. The hermeticity of the installations is guaranteed, which is why it is allowed to use smaller and, apparently, cheaper fans. They have the opportunity to spend every day, as well as the opportunity to get drunk. The smooth walls of the hoods help reduce the noise level, which positively adds to the comfort of the workplace.

Plastic does not vicorize in applications, de temperature move 90 degrees. Such moods get stuck engineering system when such ventilation is installed outside the boundaries of the premises.

For mounting plastic ventilation obov'yazkovo need to know:

• straight-cut muffs, yakі play the role of zadnuvachіv;
• reducers that act as analogues of transitions;
• vertical columns;
• grati z vbudovanim, їх function - pick up again;
• adapters to change a round cut on a straight cut;
• z'ednuvachі, scho mayut zvorotny valve, mainly zastosovuetsya in the discharge and exhaust systems;
• straight-cut tees that replace round fittings.

Krіm tsgogo, it is recommended to use a special sealant to secure the tight sealing of all seams and joints at the ventilation unit. The days are vibrated manually, changing the hour that the victories are working at the booth. The operation and maintenance is reminiscent of simplicity, repair robots you can spend it with your own hands, and the period between repairs is reduced.

Viber for diameter

The installation of any kind of attachment starts from the project, and the ventilation system is not a fault. Obov'yazkovo owe, but the type of application, in which the installation is carried out, its particularity, as well as the tightness of the drawstring, which is installed.

When installing a hood in a private booth, the first for all needs to be determined by the type and diameter. Diameter - the most important element of the pipe, wine is not guilty but lesser, lower left open. If these expansions are not completed, then it is possible to increase the pressure on the working motor, as a result of which it will be equal to the noise from the ventilation robots.

The optimal area of ​​the cut is to be protected according to the formula: S = 0.9L, where S is the area of ​​the cut; L - swidkіst poіtrya.

If we do this we will improve, we will proportionally decrease the efficiency of the robotic winding in the booth. Rotate 90 degrees to change system performance by 10%. It is not possible to allow a turn more lower by 90 degrees, at such a time the turn will be wrong.

In order to repeat, already in ventilation, it did not go back to the system, after installing the check valves. Ideally, productivity should not be reduced, if you install a pipe with a length of no more than 3 meters, with a round crossbar and a diameter of 150 mm. Ventilation systems in a private booth, roztashovani on the cottage, it is necessary to isolate from possible fallout.

Ventilation in the booth, plastic wind pipes - installed installation(video)

Installation of pipes in the ventilation system

Installation of plastic pipes is carried out at the next stages:

1. Purchasing materials, carrying out a survey and planning for the project.
2. On the opposite walls, you can see behind the opening. Later, a 150 mm pipe for drawing will be laid through them.
3. Povіtroprovіd krіpitsya to the surface for additional clamps and brackets.
4. Install the drawer itself, equipped with a check valve and a fan.
5. Run a plastic pipe up to a straight draw.
6. Before I add it, which I choose again, sequentially add a filter, a heater, an air conditioner.
7. Air transportation single system with introductions.
8. Behind the towers, additional sound insulation is installed.

Details are used for additional fittings, sealed with sealant. It is important in advance to select all the necessary fittings for the selection of the fitting system. Folding constructions are recommended for further pick up on board.

On the dahu, put a “fungus” dotally, which will prevent the entry of water into the system and regulate the circulation again. The brothers are not in the warehouse of great practice, which is why it is necessary to take care of the consistency of technology.

The ventilation system is recognized for the safety of the residential inflow fresh air the one for cleaning, wiping out unacceptable odors. Previously, ventilation systems were made from metal pipes, which took a lot of time. Ventilation pipes and plastic ones are being released. About them and timetsya at our article.

Advantages of plastic ventilation pipes

Plastic pipes for ventilation may have a significant difference in the ratio to metal pipes:

• The absolute impact of the negative impact of corrosion. At the ventilation system, condensate is constantly accumulating, the building's moisture irzhu. This aspect, having attached the respect of fakhіvtsіv-proektuvalnikov, which zmushenі buli rozrobljat folded systems zakhistu. Plastic pipes do not rust for everyday minds, which will significantly simplify the system itself, as well as installation.
• PVC pipes for ventilation are cheap for metal and galvanized analogues.
• Plastic pipes make a smooth inner surface. It allows the passage of the maximum possible reverse flow and does not require an internal cleaning of the ventilation system.
• Installation of a povіtrovodu from PVC pipes is easy. All pipes can be cut at home for the needs of expansion, and different fittings can be folded down.
• Povna bezpeka for the human body and the necessary environment.

One, but to finish with a short supply of ventilating plastics, the resistance of the material to fire is low. Itself through a lot of industrial enterprises, connected with the promotion of fire safety class and with the most excessive temperature over 50ºС, give priority to the metal wind pipes.

Zastosuvannya of plastic pipes for ventilatsionnyh systems are charged with cheapness and vіdminnimi characteristics of the material, as well as ease of installation.

Installation of ventilation from plastic pipes

The ventilation system can be:

• Vityazny. The plastic pipe for drawing is connected with the kitchen drawing room and the ventilation system provided in the premises.

• Tidal. This folding system ensures not only the primus stove, but also the supply of fresh air. Itself about such systems and timetsya further.

Before the beginning of the installation of the ventilation system, it is necessary:

• create a ventilation system project;
• choose the installation of a primus ventilation system;
• zrobiti rozrahunok system;
• buy equipment: pipes, fittings, fixings.

Ventilation system project

The majority of the premises are equipped with tidal-ventilation systems. The first part of the construction provides access to a fresh air, a friend is given for a zabrudenny veil. Ventilation from plastic pipes at the design stage looks like a diagram, it is assigned to:

• how many meters of pipes are needed for the development of overhead channels;
• in some quantity, it is necessary to install a windpipe to ensure the hot air;
• where all the elements of the system are located: fences, gratings, installations and other equipment.

View installations

Fahіvtsi razraznyayut chotir main types of installations for primus ventilation:

1. Installation with recuperator. Such a system can significantly save on the premises of the additional equipment for heating or air conditioning in the premises. Vіdbuvaєtsya tse for rahunok nayavnostі teploobmnіnika, yaky reguluє temperature mizh vіdpratsovanim poіtryam, scho to come.

1. Recirculation system. Pratsyuє for rahunok zmіshuvannya povitrya z primіshchennya z zvnі. Such a setup is cheap, but less practical. It won't work correctly for the low temperature regime and it can't stop for accommodation, in which it can be unsafe for people to talk.
2. The system can be cooled again. Perevaga zastosovuetsya in the installations community eating the kind at prim_shchennyakh, de zberіgayutsya products.
3. Ventilation with air conditioning function. Najdoroch installation. The system includes a sieve of filters that clean the heat pump.

At present, systems with a built-in heat exchanger are the most popular.

Ventilation system refurbishment

Razrahunok ventilating system starts from the calculation of the necessary ventilation. For whom it is necessary to know two indications:

1. the necessary amount of money exchange for the number of people who have been admitted. You can do it for the formula:

L1 = N * Lnorm, de

• N - number of people;
• Lnormal - The norm of repeating the exchange. The documents that are regulated have a value of 60 m³/year.

1. The required post-replacement depends on the multiplicity of the process.

L2 = n * S * H, de

• n - indicator of the multiplicity of exchange, which is regulated by special documents (for residential premises, n is taken equal to 1 hour 2, for communal premises - 2 hours 3);
• S is the area of ​​the ventilated area;
• H - the height of the ventilated room.

The maximum value of the insured indicator is accepted by the calculation of the turnover.

PVC ventilation pipes can be cut differently. At the next stage, it is necessary to know the parameter. For which zastosovuetsya formula:

Sc \u003d L * 2.778 / V, de

• Sc - the area of ​​the cross section of the ventilation pipe, cm2;
• L is the parameter of the necessary re-exchange;
• V - swidkіst ruhu povіtrya;
• 2,778 - installations of the coefficient, the necessary accompaniment of other singles of the deaths.

Installation instructions for the ventilation system

After the completion of the survey and purchase necessary materials you can proceed before the installation of the ventilation system. It is necessary to finish the work at the stage of rough repair, so that after plastering and puttying the walls, and before the finishing work is carried out. Installation diagram:

1. We choose a system of piping, which is made up of plastic pipes of the selected diameter and other suitable elements. Installation of air ducts is carried out according to a previously detailed scheme.

1. On the opposite sides of the premises, open the doors for the installation of tidal and ventilated outbuildings.

1. Climbing to the stele or walls for the help of special brackets or clamps.
2. A suction attachment is installed with a check valve and an auxiliary fan.

1. The ventilation pipe for drafting is attached to the drafting unit.
2. Before we wake up, we will add: a filter, an air heater (heater), a heat exchanger and an air conditioner (as a transfer of the selected type of extension).

1. Air lines are connected from the air supply system.
2. If necessary, additional noise is installed on the wind pipe, prepared from special materials.

Special respect for the installation of the ventilation system should be carried out on the air vents, the pressure of the air in the pipes should be strong.

Varto signify that a properly insured and installed ventilation system has a positive effect on the health of people and that promotes practicality.

Ventilation plastic pipes and outlets

Today, more and more steel pipes made of plastic for ventilation systems become more and more popular. The stench has become the main material for the construction of sewerage systems, water supply structures, gas-discharge spores and scorch lines. І tse non-transverse fact.

Pipes made of polymers for ventilation systems can be decorative. old look That's why they are so often called by buyers. In the majority of the rivers, such ventilation lines are laid at the mortgages of the public eating place, roaming places, sports clubs, sparkling sparks, where there may be a large number of people.

Cream of what you blow with plastic to make a garni decorative look, the stench was prepared in accordance with all state standards and could, including sanitary and hygienic character. In addition, their superior strength and power are not in any way supported by sumniv, shards high rіven the tightness of the sticks when closing vibrations ensures the safety of a possible leak.

Areas of use of pipes made of plastic for the ventilation system

With the installed ventilation line on the butt line, the spores were previously victorious. Ale plastic pipes with skin rock, without a doubt, destroyed the material of the past century from the leading positions.

Ventilation butt mesh

Today, pipes made of plastic for ventilation systems are made of such types. :

1. Pipe from polyvinyl chloride;
2. Products from polyurethane;
3. Pipes from polypropylene.

From the point of view of budіvelnih materials the most widely used polyvinyl chloride. Such trumpets are respected by the average looking. These data are not difficult for healthy people, they can have a high level of resistance to ultraviolet changes, they can be impervious to tightness, their installation is simple and easy, and keeping a hygienic camp of virobivs is absolutely not easy.

It is necessary to remember that pipes made of plastic for ventilation systems are not resistant to temperature indications, so that they can reach the temperature regime of the current melting. Through qiu characteristic rice on today's day, when installing saunas, they can't be blown up by more materials like metal pipes.

Plastic pipes for ventilation

Ventilation line made of plastic in industry

Plastic pipes for drawing near a private booth

Whether the industrial process of the most manipulative spheres needs a ventilation system. Early, back to the day, in the process of creating a ventilation system project industrial undertaking obov'yazkovo are taken to respect all necessary warehouses and technical stages.

In future, it is possible to increase the temperature readings to the critical level of plastic pipes (about 80 degrees) for the ventilation system, it will be necessary to install plastic pipes. In this situation, the outcome may be the installation of outdoor ventilation channels, which can be placed on the street, posture.

Advantages and shortcomings of the repaired channels made of plastic

To the head of the most important powers of plastic ventilation channels, one can add their strength of physical character, and the lightest weight, the quality of mentality and trouble-free movement from one month to another. The leaders of all the main positive features of the majority of engineering specialists give priority to plastics and galvanized materials.

Up to the expanded list of advantages :

1. The quality of excellence, as it is attached to plastic molds for ventilation systems, is insanely respected for resistance to corrosion. Corrosion is the head dashing metal of the povіtrovodnih structures. So trumpet є unite the right choice with the folded supra-water line, which does not require additional protection against corrosion. What can not be said about the galvanizing of the galvanized steel from the new, yaki, without a doubt, skhilnі to the infusion of the watery middle.

2. Low compatibility of plastic ventilation pipes. On the vіdmіnu vіd vіd mаlіvіrіbіv, pіnova politіka іѕ chаnієєєєєєє і dіd day, plastiсі materiali schodo tsgogo vyyavlyayut stіlіstі. Zavdyaki tsіy gіdnostі, inexpensive plastic virobi tsіlkom zdatnі replace pipes from the hall, like a high price.

3. For the technological and physical qualities of plastic pipes and antrochs, do not compromise with metal, but turn them over. Metallic fabrication after all processes of yogo processing may have a short, ovnishnіy look. This humpbacked structure is rotting like on the outer side of the mold, as well as on the inner part. Such small spaces ensure the movement of static processes to support the flow of rubbed masa throughout the structure. Such nuances may still be covered at the design stage. Pipes made of plastic do not make such shortcomings. Technological processes, which are involved in the production of plastic pipes, ensure the final result of the pipe surface without any water, there may look like a practically perfectly smooth texture. In addition, the vibrations of the antistatic materials, the plastic materials for ventilation systems are absolutely not as strong as the sticking of the saw. Insanely, this moment is pleasant and easy to carry out hygienic visits. Cleaning procedures are rarely needed.

It is necessary to be aware that this capacity will help speed up the maintenance of the ventilation system in the old camp.

4. Installation of povіtrovodnyh lines from plastic is more simple, on vіdminu vіd lines from metal. Products made of plastic can be sold for the required dimensions right behind the installation site of the ventilation system.

5. The main advantage is those that are made of plastic and are absolutely harmless for the human body. Damn it, the stench does not see unfriendly speeches in this world.

Nedolіki povіtrovodnyh kanalіv іz plastic

Obviously, the skin is rich on two sides of the coin. І plastic ventilation pipes are not faulty. The main shortfall, which is a kind of plastic hoods for ventilation systems, is a low level of fire resistance before igniting and igniting fire.

This fact plays out when choosing such varieties for use with high temperatures. At tsimu vpadku, the stench is signifi- cantly sacrifice pipes for metal. Taka characteristic of rice shorten the scope of stosuvannya plastic vrobіv and allow vikoristovuvat їх only for one anti-burner vіddіl.

The low level of fire resistance, which is the case for plastic pipes for ventilation systems, does not allow cracking when installed ventilation treads of commercial value, the chips of such a tread cannot pass through the fireproof ducts.

Therefore, it is possible to grow visnovkas, so that it is possible to make a cross-water construction with plastic only when a ventilation system is installed, as a transfer of services to additional premises, or a large number of them, which can lie up to one protivozhezhny in the plastic in their temperature regime.

Detailed characteristics of the installation of a ventilation system made of plastic

Most of the outlets for the installation of a ventilation system, in which the main role is played by a plastic pipe, at the exit from the structure, a metal pipe is created, the approximate size of which is about 16 cm and is equipped with a handrail for the opening parts for the wind pipe.

Buvayut fluctuations, if the design is equipped with ventilating accessories, yak vykonuyut funktsiy vmoktuvannya, so pratsyut on kshtalt pilosos, stretching the mass.

Vyazhna plastic pipe

Varieties with a large diameter parameter (approximately 23 cm) can be used in vinyatkovyh slopes, and even if you need an architectural projector of the features of the place or in general. Not included are the problems of engineering.

To give priority to plastic materials is not to the fact that stinks are one of the most popular everyday materials. And the fact that stinks are considered the most practical for evaluative criteria. Plastic pipes in the sphere of ventilation systems are the closest fates to occupy the first place on the podium, even though there is no doubt about it.

On the other hand, roblyachs choosing stainless steel mills, it is necessary to respectfully check their diameter parameters, as well as the information about their marking. Marking data about products to talk about її akіsnі characteristics of both technical and mechanical character.

Plastic pipe for drawing

How markuval information is spent on virib and what is there to talk about

Stainless steel wires are marked only once, if the diameter parameter starts at 15.9 cm, and the dimensions of the walls in this size can be no less than 0.4 cm. Coded marking information be transferred to virobi for help:

1. A custom attachment that ensures the application of alphanumeric information in what looks like dry ink. Such an attachment works in the form of an electric charge;
2. Farbuvalnyh speeches that do not give way to zmivanny;
3. Staining a sparkling olive that creates images on a stone;
4. Branding method.

In addition, what is the diameter parameter and thickness of the walls can be made from stainless steel, this method will be marked on the new one.

Informational update, as a guide to the selection of stainless steel products, transmission of data about the expansion of pipes, grade and type of metal, some kind of vikoristany when preparing the grade and brand of the plant-varnisher. It is correct to spread the marking on stainless steel screeds before finishing when it is applied, but not exceeding 0.5 meters. Sob the information was clearly visible, and it was out of for critical access for spozhivat production її it is necessary to apply farbs with bright colors.

For example, you can look at such a sequence of data on a stainless steel plate. Otzhe, MM 53x1 No. 531953 1.4202 DIN 18465/12740 SS RK 3, such information is present on a sample made from food steel, not rust.

And coding means coming :

1. MM is the virobnik brand. A specific application has an Italian brand.
2. 53x1 tse means that the diameter parameter of stainless steel is 53 mm and the thickness of the wall is 1 mm.
3. 1.4202 Designation of the sorting of metal (steel) in order to stove for a particular mill.
4. DIN 18465/12740 vkazuє on standardization, norms, zgіdno z yak were made from stainless steel.
5. SS to talk about the characteristics of the surface part of the virobu. In this way, tse means that the production of steel is made, the tovshchina is kolivaetsya in the range of 0.3 mm to 3 mm and conforms to the sovereign standards of hardness. Such a surface may be a high rіven of quality.
6. RK 3 grades from steel buv pddanii vіdpovіdnіy category vyprobіvalnyh doslіdіv.

Rozmіri vrobiv, prepared from this type of steel

The diameter of the pipe from stainless steel is deposited in a variety of types:

1. The pipe is made of stainless steel, as it was made from sheet metal, which went through the molding process and was electrically welded further behind it. Such pipes of this kind are made from three types of steel of a chemical warehouse, which comply with the sovereign standard 1106881.

2. Virіb, vygotovleniya at pohnіy vіdpovіdnostі to the sovereign standard of vibrancy 873278. Such pipes are created by hot temperatures with further molding in the form of a seamless cylinder. This type of pipes can also be used with the same grades of steel, and the diameter parameter at the boundaries is 0.080.33 cm and the thickness of the walls at the boundaries is 0.08 cm 0.32 cm.

3. Trumpet, yak_ passed through the processing and deformation by low temperatures. Such trumpets are made from steel of singing hardness and may have an outer diameter of 0.05 cm to 0.28 cm, and the diameter of the wall of the wall varies between 0.02 cm and 0.22 cm.

A sound ventilation system can be organized today like the owners of public mortgages (cafés, sports facilities, medical offices, etc.)

When choosing the obladnannya obov'yazkovo post about the air supply. The options are not rich, but any better: pipes for ventilation are plastic, or metal?

Like buvayut plastic pipes, chi skrіz їх can vikoristovuvat, like їх montuvati - about everything about tsedalі.

According to the sanitary norms of the past century, it was allowed that a rush of fresh air in the living quarters came through the small gaps at the windows and doors, through the apartment and the door was opened. With the advent of plastic bags and hermetic doors, the situation has changed dramatically.

The arrangement of the ventilation system is obov'yazkovo, but it can be different:

1. Natural (or self-propelled).
2. Primus (chi piece, mechanical).

The natural variant does not transfer the power of the energy-vitrate possession and is based on the natural powers of the future (the role of the pressure difference, the strength of the wind and the expansion of the wind play a role).

The largest city of richly-surfaced areas is secured by such a system: the tide is taken care of by the baggers themselves with a ventilation path, and the wind is blown through the mines, laid at the stage of life.

The primus method of ventilation may be on the verge of a vikoristannaya ventilator, as if the sweat is roiling and roaring.

Ventilation is fundamentally challenged for directing:

1. Vityazhna. Vіdpratsоvane poіtrya can only be taken into account by the application (otherwise it comes out on its own, as the system is natural).
2. Tidal. Safeguarding the supply of fresh air from the streets.
3. Tidal-drawn. If organized flow of flows in both directions.

The most folding and efficient primus tidal ventilation. In rich, huge mortgages, such ventilation is the only possible option.

In apartments and budinkas, private owners are free to vacate the budget, the real needs and benefits.

Features of plastic pipes

Under the solemn name of "Plastic", one of the materials made from various polymers is worn out:

1. Polyvinyl chloride (PVC).
2. Polyethylene.
3. Polypropylene.
4. Fluoroplast (PVDF).

Let's take a look at the signs of skin overexposure.

PVC- The largest extension of the material. The wine is inexpensive, easy to install, does not fall under the influx of sleepy changes. Working inter-temperatures for the new 0 - 70 ° C with a plus sign (extreme minimum -20 ° C).

Polyethylene covered with antistatic agent. Yogo can be vikoristovuvat and in the cold, shards between working temperatures from -40 to +80°C. The characteristic dark color is given to speech, which is protected from ultraviolet light.

Polypropylene do not be afraid of contact with aggressive media, are covered with antistatic, and are non-combustible. It does not vikoristovuєtsya in the cold, the shards become shrill, but it is more adventitious for spicy applications, so the temperature range for polypropylene is 0 - 98 ° C with a plus sign.

Fluoroplast the most stable to the least bursts. It can be installed in applications with extreme temperatures and for transporting flows with aggressive components. Temperatures that show the material from -40°C to +140°C.

Characteristics and pluses of plastic pipes:

• trivaliy term vikoristannya;
• smooth inner surface, hence, good flow;
• vіdsutnіst vіdkladen, not skhilnіst to corrosive processes;
• low noise level;
• light vaga;
• mysticism;
• ease of installation;
• toxic safety;
• do not need farbuvannya;
• vartist (PVC is the found option, which is cheaper for polyethylene and metal).

After being wrapped with antistatic speech, plastic pipes are less likely to attract saws to themselves, but allow you to save on the maintenance of the ventilation system.

There is also a plastic windpipe with a round and a straight-cut peretina, so that it is possible to choose one, which is faster than the interior of the mind. From the marking on the surface of a square pipe, one can not only recognize the width and height of the cut, but the diameter of the round pipe is out of the question.

For bags showing plastic pipes, turn over galvanized boxes.

Okremo varto say about the gnuchki povіtrovodi, yakі є union z balls plastic, aluminum foil and steel frame. Working temperature of polyester -50 +70°C.

Head nedolіk - such pipes do not provide reliable aerodynamics. In the middle of the flow, it hums with an uneven surface, making noise and making noise. And if the speed is not overstated again, not exceeding 3 m / s (like in kitchen hoods), then you can also look at the soft option. Installing yoga will be easier.

Are you going to house yourself and the time has come to organize ventilation? Then the next topic will be relevant to you:. Marvel at the ventilation scheme in a private booth with your own hands.

Scope zastosuvannya

Obmezhennya at zastosuvannі plastic pipes pov'yazanі z temperature mode їhnёї raboty.

Applications, in which the temperature of the superfluous medium can approach the critical point for PVC + 80 ° C, it is recommended to vicorize either refractory polypropylene or fluoroplastic, or metal (prote galvanizing can work temperature -40 +80 ° C, so you can freeze it on steel). aluminium).

On objects, de important fire safety, better vikoristovuvati non-combustible metal box.

Plastic pipes of large diameters can be beaten at large enterprises, hangars, warehouses, garages, etc.

From polymeric materials it is possible to sporadzhuvat merezh razgaluzhenyh kanalіv, to that їх zastosuvannya not zastosuvannya small objects.

If you still want to see plastic surgery, you can look at the possibility of installing outdoor ventilation, if the plastic ventilation ducts pass in the wake of the morning, on the open air.

Installation of the system at the door

In small houses and apartments, most often there is a supply for the installation of a vent, which closes the hood of the kitchen hood with an air vent. The most suitable here will be the use of a straight-cut channel made of plastic, which can be laid with an incomprehensible rank over hanging wardrobes. Methods for closing various plastic materials are one kind of one.

The winding channel is taken from straight pipes, which are sold for:

• 0.5 m;
• 1.5m.

Vikonati vigini and go to help ready-made shaped elements and adapters. They insert one into the other, and the installation process is guessed by the designer's choice. There is no need for any additional supplements, couplings and zvaryuvannya.

Without the need, it is not necessary to sound the channel, sticking an element of a larger diameter, with a smaller one. At the places of the ringing, a whirlwind and a noise move.

Lay down the scheme of that, like the pipe itself, it is necessary for the back. With this exercise, it is necessary to reduce the number of turns to a minimum, even with dermal ones, firmness and pressure to the flow are used by 10%.

In the scheme, where the impersonal turns do not disappear, it is better to win the vicarious winding up.

It is recommended to install a gate valve on the exit opening. Vіn zahistіt vіd hit in the system saw, coma and smells zzovnі.

Before the speech, how to send the primus stove ventilation opening zagalnobudinkovo ​​mine, a vice at it to outweigh the rozrahunkov showcases. Tse prizvede to the fact that, after smelling the smells that you see, to eat at the apartment of other bagmen. Father, come like this hanging outbuildings can't.

Pipeline, insurance for work, repeat, can be as sealed as possible. Therefore, when closing the elements, the leather stick is smeared with silicone sealant.

Visnovok

More wind pipes to move plastic pipes.

And it will be the best solutions, even if such a channel is easier to install, it will serve you for a long time and more pleasantly.

In cold minds, you can put polyethylene. There de more beautiful vikoristovuvat polypropylene.

On fireproof plots of indications of steel and aluminum variant. In other cases PVC can be stuck.

If the ventilation shaft has become a source of unacceptable odors, then it will help you to deal with this problem. At the article, recommendations were made on how to fold the valve with your own hands.

Methods for the analysis of the main parameters for organizing ventilation in a private booth are indicated in the material.

Video on the topic

Our great contribution to work in the field of ventilation is to serve you well conductor for any ventilation system, and prompt delivery will not bother you for a long time to check on the goods you have chosen.

Do you need more wind pipes? Air lines required for moving around from point A to point B. How can I get involved in different opinions? At the butovіy ventilation zastosovuyut plastic and flexible windpipes. With us you can buy windpipes For moving air, a fan or a kitchen draft is required. We need to check the diameter of applications with a picker, as well as the productivity of the tool itself.

Plastic wind pipes made of ABS plastic, which does not change the color and is not stylish to the old days. And a large number of hoods, triplets and adapters allow you to easily select the necessary ventilation system. stink garni warmly and soundproofing power, as well as a low opir repeat.

Kitchen Dimary. Not alone modern kitchen can't do without it butt fitting like a kitchen drawer. Have your own room, kitchen hood for more efficient work wisnovok is consumed ventilation shaft. For ts_єї meti invariable plastic dimary. Kitchen ventilation plastics are not afraid of sour and puddle vapors, the stench is resolutely pierced, hard molded, absolutely smooth in the middle of the stink, do not create support for the worn flow and ensure the soundless movement of the air. Plastic roofing in the kitchen does not ruin the design, but if you need it, you can get some kind of color. And the installation of a wind pipe in the kitchen does not require special skills.

Plastic wind pipes for ventilation . For civil objects, especially for houses, apartments, bars, restaurants and shopping centers, where it is more productive to use plastic wind pipes for ventilation. Stinks do not conduct electricity, are not weak to corrosion and may garniy looked. Installed in any application, plastic windpipe to ensure the noiseless supply of fresh food, and to see if it is possible to repeat it. Golovna perevaga - tseh high efficiency. Zhorstko moldovanі tarely prorakhovanі, absolutely smooth in the middle of the stench not to create support for the wind flow.

Prepared by us, as they are often discussed, they will help you to better understand the diversity of plastic windings and shaped parts.

If you post a meal about the laying of airways, blame the bazhannya for the sake of them as unremarkable as possible. In what way are unforgettable flat rectangular windpipes . Our faculty will help you with short term robiti rozrahunok povіtrovodіv і zіbrati nebhіdnu system poіtrovodіv rectokutnyh.

Main advantage rectilinear winders those that stench may have a small height, which will make it easier to grow them invisible, while saving the necessary productivity, stench can easily be buried near hanging steles, near walls, and how to go about vikoristannya їx for the kitchen view. shafi.

Flat wind pipes can be zhorstkim i . The stench mayut 3 roses:

110x55mm - can be installed for draft hoods and fans with productivity up to 300m3/year.

120x60mm - zastosovyvaetsya for ventilators and fans with a productivity of up to 350m3 / year.

204x60mm - can be installed for draft hoods and fans with productivity up to 1000m3/year.

The system of rectilinear (flat) windpipes in any booth is a whole separate dychal system. Technically, leather ventilation is either straight-cut or it is a pipe that opens access to the house until it is open and allows you to effectively ventilate the premises. Today's curiosity The air duct of the straight-cut ones is located in the camp of the post-construction, new shaped parts are being introduced, which makes it easier to choose the best ventilation system.

Rectangular flat air ducts, can stagnate in aggressive environments and may have a trivalent term of service. All these factors, in their own right, allow the most efficient organization of the circulation of recirculation flows in living quarters and industrial facilities.

Installation of straight-cut, shaped air ducts.

Povіtroprovodi pryamokutnі tse yak constructor only for grown-ups. For the installation of flat windings, you do not need to be a fakhivtsy and mother as a special quality. For assembling povіtrovodіv mozhut znadobitisya vsogo Dvi rechі: Jig abo nozhіvka of metal music (for dwellers vіdrіzati neobhіdnu dovzhinu) i Dril (Yakscho Je neobhіdnіst krіplennya povіtrovodіv to stіni abo stelі) Usі fasonnі Chastain pryamokutnih povіtrovodіv odyagayutsya on povіtroprovodi schіlno i not vimagayut dodatkovoї germetizatsії . Z'ednannya povіtrovodіv mіzh themselves vіdbuvaєtsya for help z'єdnuváchіv, scho allows you to pick up the ventilation system, be it ever. And there is a large number of cuts, transitions and other shaped details to help you choose the best ventilation system.

Prepared by us, which are often discussed, will help you to better understand the diversity of plastic rectilinear windings and shaped parts.

We ask you to contact wholesalers and trading organizations, and wholesale prices will help us to establish a new line of working blues.

Round windpipes made of PVC plastic, which does not change the color and is not as old-fashioned. And also with such qualities as shock, resistance to aggressive puddles and acidic mediums, atmospheric phenomena and the appearance of borrowing materials.

PVC circular guides may increase the aerodynamic power, and intensively draw in the weights. Round air ducts are even easier to install. The stench can be zhorstky and may have the same diameter:

100mm - suitable for kitchen drawers or fans with productivity up to 300m3/year

125mm - suitable for kitchen hoods or fans with productivity up to 650m3/year.

150mm - suitable for kitchen drafts or fans with productivity up to 1100m3/year.

Round system pvіtrovodіv pvc - You can win at the ventilation be-like budіvl. Technically, leather air is round, with a pipe, which opens access to the house to a clean finish and allows efficient ventilation of the premises. Today, the production of round ventilation ducts with PVC is rebuying at the station of the permanent refurbishment, new shaped parts are being introduced, which makes it easier to install the most folded ventilation system.

Round air ducts, can stagnate in aggressive environments and may have a trivalent term of service. All these factors, in their own right, allow the most efficient organization of the circulation of recirculation flows in living quarters and industrial facilities.

Installation of round povіtrovodіv. Round air ducts tse yak designer is less for grown-ups. To complete the installation of round windings, you do not need to be a fakhivtsy and mother as a special quality. For the installation of windpipes, you may need all two things: a jigsaw or a hacksaw for metal (in order to cut the necessary dozhina) and a drill (as well as the need to fasten the windpipes to the wall or steel). . Z'ednannya povіtrovodіv mіzh themselves vіdbuvaєtsya for help z'єdnuváchіv, scho allows you to pick up the ventilation system, be it ever. And there is a large number of shaped details to help you choose the best ventilation system.

Prepared by us, which are often discussed, will help you to better understand the diversity of plastic round windings and shaped parts.

We ask you to contact wholesalers and trading organizations, and wholesale prices will help us to establish a new line of working blues.

It is not rare that ventilation is added up, and. In this way, there are indispensable adapters between round and flat wind ducts. Chosen and represented by us will help you to understand, in some cases, there is a different transition.

Adapters between round and flat channels most often, vicorist is used with the method of closing flat and round channels with cladding of a stained-glass or tidal ventilation in the premises of a small area different recognition. Some of the most important moments of such transitions can be called the following moments:

• Ease of installation. Їx installation is carried out without interruption in ventilation duct for joining povіtrovodіv z razny peretina (from flat to round);
• High quality virobiv. The stench is made from high-quality PVC plastic, which ensures the safety of the service life of the products;
• Wide temperature range (vіd -30 to +70).

A rich assortment of types of air conditioners presented on our site allow you to choose the most appropriate option for a ventilation system.