What better adhesive pvc sheet panels. The main pardons of quiet installations. Technology of laying ceramic mosaic tiles

⁰

Plastic panels with polyvinylchloride - a wonderful option for finishing walls. The leaders of high-technological PVC, wall panels from the new material occupied the place as the most needed material for interior work.

However, sooner or later, under the influx of new factors, PVC panels lose their aesthetics and replace them with a new material. At the link with the Vlasniki living quarters, food is often blamed: why can you glue tapestries on plastic panels without dismantling them?

For gluing tapestries on PVC, it is necessary to choose the right primer.

Once again, it should be said that it is permissible to glue plastic panels with trellises. At modern development Technological progress was left with little absolutely insane improving materials. The next step is to get to know the technology of confusion: choose the right primer and cool warehouse.

In order to get better at all thin walls pasting with trellises the wall, front-coated with plastic, you should become familiar with the technical features of both materials.

Plastic panels have earned such wide popularity in interior design before the coming authorities:

Available price. For this indicator, PVC panels are among the leaders in the segment wall panels.
Vіdmіnna stіykіst іn vplu vіvu vіdvishchenої vologostі. Zavdyakov tsomu, wall panels from PVC can vikoristovuvatisya for the completion of bathrooms, sanitary facilities and open balconies.
St_yk_st to ultraviolet viprom_nyuvannya. PVC-panels can withstand the influx of sony spaces, practically without losing the brightness and intensity of the color.
Ease of installation. There are special locks on the edges of the panel for ease of closing. For the help of "rare flowers" and screws, you can glue the panels to the wall or screw them to the frame.

The glossy surface of the panels facilitates the gluing of trellises

May this representative, like and be-yakі іnshі ozdobluvalnі materials, tat nedolіki. Nasampered - the price of the low lightness of the half-moon, and to see the sight at the mountain of the blast chemical components.

But the main feature of PVC panels is the smooth glossy surface. From one side, we put on the lining of high decorative stones, but from the other side, we can arrange them with some kind of material, like lacquer-farb warehouses, and trellises.

Low indications of adhesion between smooth surface plastic and whether it be a glue or a bulk warehouse are not allowed without special preparation to glue them with tapestries.

trellis

This type of decorative covering for walls has been at the peak of popularity for more than a decade. Getting into the trend of trellises goes ahead of the regular update of the proponated assortment. Today's trellises are not only paper rolls, but we put a little on them.

Modern trellises include such high-tech views, as it is practically impossible to make anything sleepy with their paper fronts. Today's purchase is presented in such a way as this supplementary material:

paper. The most simple variety, which exudes a low grade and a low sharpness to a splendid infusion;
non-woven. A richly spherical variety, de in the form of a base, a prominent polymer fabric - fleeceline. The upper decorative cover can be worn with a practical material - from paper to vinyl and cloth;
vinilov. Another variant of bagato-ball trellises, as the main ball here is polyvinyl chloride. Depending on the base material and the number of balls, they can be either “light” or “important”.

There are three main types of tapestries on our market, and more "exotic" varieties: cloth, jute, "rare tapestries", textile thin.

Practically different types of trellises can have their own technology of gluing, as well as glue, splitting specially for the sing-like type of trellises.

The most complete information about technical features and the method of stosing can be chosen by carefully reading the instructions on the packaging.

The tables have deeds smart designation, which is applied to the tapestries with their marking, and their decoding.

Choose yakіsnі sumіshi for gluing

Technology stickers can be zastosovuvatisya also different. When gluing some types of trellis, for example, paper or vinyl glue warehouse, it is applied both on the canvas and on the wall. When gluing non-woven fabrics - only on the wall, etc.

Some adhesives should be glued to the base and the canvas of the trellises, so that when gluing, the next step is as accurate as possible.

Other types of adhesive warehouses allow for an hour to move the canvas along the wall after they have been glued, creating the texture and little ones.

Most of the glue warehouses are allocated for gluing the trellises to finish the porous base with bad adhesion. Only on such a suggestion can you glue the canvas without a rizik, which is called to be glued or blown with a bulb in the next hour.

Gluing technology

For better adhesion with PVC trellises, fiberboard can be upholstered

Due to the designation of more features, such as PVC wall panels, as well as trellis adhesive warehouses, it is impossible to finish the mitzna zchipka between them. Therefore, if you want to glue walls with PVC tapestries, you will need to promote their adhesion. You can do this in two ways:

Wall sheathing with PVC other material, which is more suitable for work with trellis glue. It’s best to twist fiberboard sheets in this way - they stink cheaply, it’s easy to open and install, and it’s also wonderfully suitable for gluing tapestries on them.
Improved adhesion to moisture of PVC panels.

The first option is a lot of reason - fiberboard sheets are simply fastened on top of PVC panels for additional screws. The other means a special look. Preparation of old surfaces with polyvinyl chloride before gluing the tapestries includes a few steps.

Finishing with abrasive materials

Abrasive washcloth

The back of the old plastic surface is resolutely cleaned from the wood, the saw, the fat build-up is thin. For whom the vicorist sponge is soaked in a mile size, be it as if you have the butt chemistry. After that, as soon as the soil was tidied up, and the surface of the panels was dried, the next step was to apply a smooth plastic surface with a larger short texture.

For whom should you win the ranks of scotch-brite with an abrasive washcloth. It is necessary for her to finish the entire surface of the panels. Ruhi is due to be intensive, a sufficient pressure is to be carried out on the washcloth, so that the glossy surface of the boulder is covered with a faceless rubbish undercoat.

For the use of scotch-brite for overlaying the plastic surface of the short structure, you can use fine-grained emery paper or a grinder with a “null” stake.

After such processing, the plastic panel on the dot becomes non-destructive on the surface, covered with putty or good cured plaster. Therefore, the adhesion of PVC panels for additional operations was reduced to a number of acceptable indications.

primer

Apply a sprinkling of balls of primer

Before applying the primer-warehouse, the surface should be cleaned with a grinding saw, which is covered with abrasive materials after finishing. A primer deposit is applied to the surface of the panels behind the help of a paint pen or roller. For this purpose, there is a special soil warehouse, applications for processing glossy surfaces - kahl, skla, plastic.

Vrakhovuchi such a “folding” base, like a plastic flat, apply yogo bajano to two or three balls. In case of skin, it is necessary to apply the offensive ball not earlier, lower the front ball when dry. After that, as the primer is dry, you can proceed to gluing the trellises.

Tapestry glue

After preparation, it is practical whether any glue is guilty of making a good seal on the PVC panel.

However, fakhіvtsі still recommend pіdstrahuvatisya, zastosuvavshi for gluing trellis special warehouse, preparations with their own hands for which one is taken and bred primordial trellis glue is suitable to the type of trellis, scho zastosovuetsya (vinyl, flіzelіnovy, etc.).

Let's add to the new all-purpose PVA glue in proportion to the main glue. Report about those how to glue tapestries, marvel at this video:

PVA can significantly improve technical characteristics be of some trellis glue, and such a warehouse should be provided with a rich mіtsnіshe zcheplennya mizh PVC-panel and trellis canvas.

Plastic panels with polyvinyl chloride come to the rescue, if necessary, quickly, inexpensively and carefully to repair the house. Operational characteristics Because of the available material, it is highly endurable in the minds of a humid microclimate, so PVC panels can be used to form a bathroom.

To sheathe the walls of the bathroom with plastic, install a frame from metal profiles, or use special glue for PVC panels. At this article, mi rosepovimo, yakі store, what to glue, you can wink, so that the stench was trimmed more than 10 years.

Features of the material

Plastic panels are a modern building material that can be used together for the help of a special lock. Wines are made from mimic polymer plastic, polyvinyl chloride, which is not afraid of increased moisture, characteristic of a bath, temperature drops, infusion of flowers and fungal microorganisms. Service term plastic panels to become over 10 years, which should be paid with a modest price with a good term. Installation of the material depends on the number of methods:

Get respect! Decorative panels it is possible to glue without a middle to the wall, vicorous glue. This swedish and handy way is suitable for those who are lining the walls of the bathroom with their own hands. Vіn vіmagає retelny virіvnyuvannya and p_preparation surfnі, ale zaschadzhuє master rich hour.

Wimogi up to characteristics of glue

A foldable microclimate in a bathroom hanging high up to the building materials and equipment for their fastening, to which PVC panels can only be glued by special warehouses. Increased moisture, constant temperature drops and a friendly environment for the development of flowers or fungus to the extent that the strong glue does not secure superficial fixation.

Glue, which is victorious for, is guilty of the mother of the attack:

Resistant to water. At the bathroom kіmnati vologiє vologiyu admissible norms Therefore, for gluing, only water-resistant brands of glue can be used.
Resistant to temperature extremes.
Tolerance to ultraviolet changes.
High antibacterial power. A bath with water and a warm microclimate is an ideal medium for the development of a disease-causing microflora. In order to prevent the expansion of the fungus, it is possible to glue panels made of plastic for additional special warehouses with antibacterial additives.

Let me know that the quality of the glue is comparable to the pre-trial technology for the preparation of walls in the term of the service of wrapping the walls with plastic panels. Plastic can be practically glued, be a kind of warehouse, what to glue, shards of wines are light, but if you look at wines 10-15 years of operation - great food.

At the skin master, which is engaged in the processing of walls with plastic panels, it is necessary to check the brands of warehouses, what to glue, in the reliability of such wines. Adhesive building, the shape of the release, the firmness of the hanging and the strength of the application are poured into the glue. The following options are popular:

Respect that the high price of the glue does not guarantee the quality. When buying a warehouse for robots with plastic, pay attention to marking, de designated, what to use for gluing this material, how dry, what smell, resistance to water and antibacterial additives.

Gluing technology

By itself, gluing plastic panels does not cause any special difficulties for the master, it takes more than an hour and effort to prepare the walls before work. Ale vіd yakosti vikonannya preparatory stage to deposit the final result of the bathing room.

Gluing the panels is possible with the following algorithm:

The walls of the bathroom stone are vibrating, as if the stench is nervous, they putty, and then they scrupulously cover with a primer of deep penetration. The walls are dried for hanging, which is recommended to be glued on a dry surface.
Plastic panels are brought in from the occupant for 12 years, so that the stench "acclimatizes", after which proceed to cutting.
On the skin panel, apply the adhesive dotted or in a dotted line evenly on all surfaces, and then firmly press it to the wall.
After completion, the glue will see the excess with a clean, wet ganchirka.

Dosvіdchenі maistri before gluing the cob to recommend degreasing the surface of the wall, and then work it with a thin ball of glue and let it troch to climb in order to improve adhesion between materials.

Plastic processing has a high decorative potential, a majestic choice of small prints, vizerunks and colors, added to any interior. Panels that are vicorated for lining a bathroom can be smooth and voluminous. Panels made of polyvinyl chloride are inexpensive, but a durable alternative to ceramic tiles is suitable for residential and commercial applications.

Video instruction

It is covered with high wear resistance, does not fray, does not let water through, is not responsive to steam and temperature changes. For the sake of their unique powers, such panels can be installed in bathrooms, kitchens, front rooms, or komori. This material does not require any meaningful sight - enough and a simple watery cleaning, and you can mount it on a specially made aluminum or a wooden frame, and on rare flowers.

Modern PVC Panels are a practical polymeric material for any application. The covering is made of plastic based on vinyl chloride. The rest of the material is resistant to greater chemical resistance, acids to the meadow. PVC panels are hard and hard, the stench does not absorb water and is unacceptable to any temperature fluctuations. They can be vicorated for lining bathrooms, saunas, kitchens or verandas. If necessary, such panels can be beaten with other materials.

For the specifics of the preparation of PVC panels, they can practically imitate whether the textures and be prepared in the faceless colors and colors.

Today, PVC panels are the most popular material. Vіn not vymagaє kakoїs osobliї podgotovki і, moreover, zdatny prihovat deyakі arkhіtekturnі nedolіki and defects sіn.

The installation of such a coating is also easy to pass through.

You can do this in two ways:

Behind the help of metal or wooden grating. It acts as the basis, like a panel behind the help of screws and brackets. Plus, at the open space, having settled down between the wall and the covers, you can either capture the electrical wiring.

Be prepared that such a design will take 3-5 cm of space from you.

For the help of synthetic glue. In this way, the material is glued directly to the surface that is being decorated. Similarly, similar manipulations can be done for the help of rare flowers. Adhesive warehouse should be applied to the entire surface of the sheet and firmly pressed to the wall. Dry such a cover will be no less than 4-5 days.

In this way, the wall will have to prepare. Її next clean the old coating, resolutely dry and degrease.

Virobniki

PVC panels reach the middle price segment. At the vitchisnyany budіvelnih shops, the representation of brands is more important. Zvichayno when bazhanni you can know the products of foreign companies, but the variety of them will be commemorated.

Among the vacancies of PVC mosaic panels, special respect is given to such companies as:

Plastdecor is one of the best business enterprises that specialize in the production of polyvinyl chloride coatings. The company has named its activity in 2003 as the largest harvester in its gallery. Plastdecor spіvpratsyuє z bagatma budіvelniy firms and specialized stores, so that the range of products of the designated brand can be known in a practically any place in the country. The preparation of all materials is carried out at a high-tech modern state. With whom, the company does not only victoriously accept the schemes of selection, but also uses the best technological methods, which allows you to noticeably increase the quality of the claims that are released.

Dekoplast - the company has been manufacturing PVC panels since 1999. The brand can be made at the factory, and the introduction of new methods and methods of work allow not only to slightly improve the quality, but also to produce a fundamentally new look. All products of the company pass the court system of control, which allows at the beginning stage of the development of the product to be introduced, which does not exceed the limits. PVC plates Dekoplast povn_styu v_dpov_dayat v_tchiznyanim and international standards. The products of this brand were often awarded awards and certificates of quality.

Variable characteristics

It is accepted to see such different types of plastic panels:

Panels of dial type. The stench is a narrow lining. The length of such material can be 3 meters, width - up to 60 div.
. Tse pokrittya є with straight-cut or square sheets we will apply to the beast with a embossed mosaic little one.
Tile. In this vipadka, the cover may have the form of straight-cut abo. Rosemaries of the rest can be in the borders of 30x30 to 100x100 cm.

Most mosaic PVC panels are produced in the format 955x480 cm. They can be covered either glossy or matt.

On the other hand, the production of such panels for interior decoration was expensive. That panel itself looked so important that it did not give the opportunity to beat them for interior decoration. However, with the appearance of the method of free spinning of polyvinyl chloride, it was possible to prepare a light and equally accessible material.

Taken as a result, the panels may have the following characteristics:

Fire resistance. The temperature of the sleep of the descriptions of the panels should be over 500 degrees.
Plastic does not absorb and does not allow water. For rahunok zastosuvannya sealants in the penetration of the rіdini it is included to wind at the seams between the sheets.
The commercial structure of the mosaic panels protects the space from outside sounds. This material is often victorious in public mortgages, cafes and other places because of the equal noise.
PVC panels are not strong enough to mechanical failures, so you can not be afraid of cracks or cracks.
Mosaic panels do not bend badly. From them it is possible to create designs, be it folding. Plus, for consumption, the panel can be easily cut, drilled, milled and cut into a figured contour.
Zavdyaki zastosuvannya polymeric materials such plates are not strong enough to rot and may not be surrounded by terms of service.
Appointed cover not to avenge the unsafe chemical causes and important metals, so you can stop it in any kind of living quarters.

Plastic panels have become popular building materials for the rest of the hour. Їх wikoristannya allows short strings zrobiti garne ozdoblennya.

The diversity of textures, colors and rozmіrіv add to create a unique design of the place. Їх zastosovuyt for shaping kitchens and balconies, and the durability to moisture to rob plastic panels is simply indispensable for pasting the walls of the bathroom kіmnati.

Knowing what to glue the plastic panels to the wall, allow you to successfully install this decorative material.

Most of the plastic panels are vicorous, to viconate the refurbishment of the bathroom. Tse means that the glue, which is victorious, is to blame for the superstitions to instill in the minds of advanced water.

Choose glue with high adhesion and dry adhesion

Required characteristics for glue:

water resistance. So, as the moisture content of a bathroom temple, glue for gluing can only be vikoristy only from water-resistant brands;
high level of adhesion. It is necessary to ensure the best connection with the wall;
resistance to different temperatures and fluctuations. Vykoristannya panels at bathrooms, temperature and moisture domineeringly change, it is possible only at the time of overhead fastening to the surface walls;
manifestation of antibacterial powers. The water and the warm middle is ideal for the reproduction of bacteria and fungus. From a glance at the glue for wall panels, it is guilty of being antibacterial;
longevity. If you want to glue the panels, you can be like some kind of glue, so that the stench will be superficially fixed on a lot of rocks, you will need an acid warehouse;
shvidka "hoarding". It is necessary that with a stretch of 10 strands after gluing the panel on the wall of the wall, it was already fixed;
daytime high level toxicity and strong odor;
transparency.

Glue, which is suitable for all types of smokers, will be suitable for gluing PVC panels to any place, to be placed near the bathroom, where the temperature is increased to the right. Tse allow obrobtsі zalishatisya have imminent looking old fates.

Options for gluing panels

Explore different options for how to glue plastic panels. The leather master can use glue, but all the same at this gallery there is a wide choice, and how can glue the PVC panels? The following describes the main options:

Emfikol 34012A. This glue is specially designed for fixing to polyvinyl chloride, so it can be used for fixing with plastic.
Kleiberit 636. Made from synthetic resin-based creations, which are environmentally friendly.
Crystal moment. Such glue vikoristovuetsya for gluing on the surface.
Rіdkі tsvyakhi 601 Tse universal glue for vnutr_shnіh robіt.
Rare flowers 901. Glue, which zastosovuєtsya as for the work of the middle place, so call. You can safely attach important materials.
Rіdkі tsvyakhi 915 - sticky speech, as a special vicorist for bathrooms.

table. Main characteristics of various adhesives

Glue	Perevagi	Nedoliki
Emfikol 34012A	Mitsnist, viscosity, stability to temperature differences, color vibrancy.
	The price is available, water resistance, visihannya.
Moment Krystal	High degree of adhesion, longevity, color vibrancy, resistance to moisture and temperature changes.	High price.
Rare flowers 601	Durability.	Visibility of water resistance.
Rare flowers 901	Vologostіykіst, versatility, mіtsnіst, dogovіchnіst.
Rare flowers 915	Resistance to water and elevated temperature (specially for bathrooms).	Opaque, ale may light color.

However, it’s not enough just to choose the right glue, it’s important to know how to glue the plastic panels so that we don’t have to remake everything later.

Technology of fastening of plastic panels

Glue panels on cleaned and primed surfaces

If you want to know that the installation of PVC panels is foldable, in fact, following simple instructions, all work can be done with your own hands without getting fakhivtsiv.

Deyakі vvazhayut for the better krіpiti such material on the back of the installation of the frame, which will change the area of \u200b\u200bthe room. How to glue PVC panels? Dali pokrokovo painted with the technology of fastening for additional glue.

Under the hour, it is important to work from gluing the panels to unique material. Also, remember that the smelting is done only after the residual installation. Schob lines, how the material is cut, were as equal as possible, opening and cutting a trace of work only from the front side of the material.

As you can see, the work of gluing plastic panels can be carried out independently. For the cob, it is necessary to use glue, for which the given material is to be fixed. Look at adhesives for PVC panels to marvel at this core video:

For finishing bathrooms with one good optionsє variety of rare flowers 915, which are specially sized for work in areas with promoted vology. Before the installation itself, it is important to cross over at the equal walls, even if you want to lay old look application for installation of panels.

Adhesive for PVC panels - less than one possible options installation of this material to the surface. Ale, the beginning of his efficiency of wines, to know the Daedals more than heeds.

1 Briefly about PVC panels

First glue PVC panels, you need to be familiar with the material. The abbreviation PVC is deciphered as polyvinyl chloride - the same material from which the panel is made. Seemingly simpler - the whole of plastic, which has a number of powers, yak allow you to effectively zastosovuvat її as a material. The area of PVC cladding is even wider: the improvement of loggias, balconies, verandas, bathrooms, swimming pools, basements, office and commercial premises is too thin.

Such a wide-width plastic lining has bulged a number of non-peripheral vanes and vanes, such as they may be:

the great term of service - over 10 years from the improvement of climatic features of the region of residence;
frost and heat. Today it is possible to know the models, yakі zdatnі vitrimuvat temperature range from +80 °C to -30 °C;
may be highly moisture-resistant;
st_yka to ultraviolet changes;
stіyka to mechanical vplivіv;
PVC does not support the burning process;
є environmentally safe material;
accessible, easy-to-read material;
possibility of installation of cladding on various surfaces: chains, wood, concrete and others;
improve the soundproofing of the premises;
volody with some decorative characteristics and a wide range of textures;
panels allow you to manually lay out and close the electrical wiring.

Insufficiencies of this material tezh є: vіdpovіdno to norms fire safety PVC panels cannot be used for the processing of facilities used for the evacuation of people. Corridors, entrance groups, descents, and other evacuation routes are visible to such places. Ale, on the improvement of the apartment, or the house does not expand, which allows you to coristuvat with all the advantages of this material.

When choosing PVC panels, pay attention to the design aspects:

blazing ovnіshnіy vglyad - may buti even surface, without defects;
the width of the front surface - the wider, the smaller the facing;
the number of ribs of zhorstkost and їх stan - more and more, tim mіtsnіshe panel;
z'ednannya panels - obov'yazkova nayavnіst yakіsnogo zhorstkogo stikovalnogo groove;
vaga material - what is the greater mass of the panel, the team is out and the mіtsnіsha;
syrovinny warehouse - at the same plastic facing maє booty low volume crady;

In order to convert PVC into a crade, it is enough to press the panel and analyze the area of the bend. If a dent is left, then the crade is present in a large number of people more for the need.

price - may be adequate and according to market indicators;
trade mark - a particular brand can be a guarantee of the quality of the product.

2 PVC panels: mounting on glue chi colors?

PVC panels are a very versatile material for indoor and outdoor living, which can have a great list of positive characteristics. To this list, one more point can be boldly added - the possibility of choosing the most convenient method of installation. And to choose effectively, why and before that, how to glue PVC on the wall of a steel, follow in detail with the use of methods, so that the whole working process is indebted.

Ways to install plastic panels:

mechanically fastened with staples, self-tapping screws or flowers until grouting. A simple and superior method, which is not recommended for use with temperature fluctuations, since the panel is bound with brackets and warps, not in the air, it will move / sound under the influence of temperatures.
mechanically fastened with clasps, which are fixed on wooden brass with flowers (staples, self-tapping screws). The temperature is lowered at times, it is free.
mechanical fastening with clasps to plastic grating. With this method, everything is attached manually, nothing is drilled, and there is no need for special tools. At some point, the lining can be dismantled and transferred to another surface.
installation of plastic panels with glue to the base surface. For you know what the wall is to finish evenly, you can glue the panels without a middle to the surface. For whom it will be sufficient to apply glue on the panels and attach to the wall. A simple way that does not change the temperature expansion of the plates.
fastened with glue until reshetuvannya. The lathing is being restored, so that the surface is leveled, and PVC lining fasten on it for additional glue.

Choose one of the other ways to lie down depending on the minds of the worker: temperature regime, surface hardness, water material, dismantling needs, etc. That is why, first of all, it is necessary to work out all the unfavorable moments, which can be blamed on the process.

3 Adhesive for PVC panels: features of installation work

In order to carry out installation at the glue warehouse, it is necessary to supply glue for PVC panels. It can be used as a glue: resistance to temperature cracking and UV-changes, water resistance and hardness, viscosity, as well as a strong smell and environmental safety with a tan. Kindly z zim zavdannyam vporayutsya such glue warehouses: Rare flowers, Titanium or Montage-Moment.

It is possible to creak the panels directly on the wall or the stele in that case, as the surface allows, so that it is equal and smooth and it is possible to show the vag of facing. How do you sum up something that working surface showcase the vanity, more beautifully її and resolutely prepare to the farthest cut. Zagal the whole process can be divided into a few steps:

Installation of PVC panels on glue - pokrokov scheme

Krok 1: Surface preparation

It is necessary to evaluate the standard of sten. For example, defects (hollows, swelling, cracks), the wall needs to be puttied. So, in the fight against the imperfections of the walls, one can speed up the resolutions.