How to fasten a kitchen hood to the wall. Classification of contemporary hanging outbuildings. Connecting the hood to the power line

⁰

The installation of a ventilation hood, which is to be vbudovuetsya, is necessary, so that the smells in the kitchen were washed out during the cooking process. For a daily approach to the kitchen, the presence of this element is not discussed - wines are planned for cleaning. It is optimal to choose a cleaning device that is connected to the ventilation duct. Such draws can be twisted in two modes: turning on the recirculation again, and you can turn it on more often for the middle of the house. The drawstrings that fit into the closet are very popular, especially the telescopic models.

Perevagi vbudovuvanih vityazhok

Shchob take maximum efficiency robotic drawstrings that come into being, it is necessary to place them directly above the cooking surface, or above the oven, as if it were to stand still. Vіdvedennya poіtrya zdіysnyuvatimetsya shvidshe.

Vbudovanі pristroї vyvedennya zarudnennya poіtrya z kuhnі may be important from the point of view of the decorative solution. Їx is practically invisible. Visually, only the surface, which is drawn in, is visible. Todіyak osstrіvnі and domed vіtjazhki not sympathetically commemorate wild interior kitchens.

Respect! It is necessary to think about those who did not only see each other again, but it was necessary for tidal ventilation. It is better to use the recirculation mode in winter, which will save the change in costs. Most models have a function automatic switch-on. This ensures high energy efficiency.

Telescopic kitchen hoods to fit into the closet

Telescopic models are presented with one engine and two. So clean the turbine again. The maximum productivity of telescopic hoods can reach 1000 m3/year.

Regardless of productivity, whether the installation of this type is compact, and the curtains of the hanging panel can expand the working area. If necessary, the chairs can be easily tucked into the bowl. The front panel is the whole part, which can be poached, shredded in the closet. Pіdsvіchuvannya so vbudovane.

Cream of two modes of operation, purifying again in its configuration, two filters can be used - coal and grease. The stench itself trims the fat and cleans it “with repeated repetition” from the boil and the smell.

An important setting parameter is the noise level for the hour of operation. The width of such cleaners can be 500 mm, 600 mm, 900 mm.

behind colors there is no frost. The most successful models are those that have a broken body made of stainless steel. Such sweatshirts for the account of the possibility of replacing the filters serve for a long time.

Filters change frequently - 4 ten times a day. This is the main vada, and the price is also high. Modern telescopic hoods can be controlled by touch or by an additional remote control panel.

For some buyers, important are also additional functions, which are common in more expensive models:

keruvannya for a helping voice;
the brightness of the light in a budding light can be regulated;
in automatic mode, the work modes can be changed;
the function of turning on and turning off the draw is carried out after the timer;
special sensors that react to the contamination of filters.

When buying a sweatshirt, the warranty term is observed. In high-yield models of wines, it becomes less 3-rocky. It is also recommended to check right in the store, how loudly it works.

How to correctly install the drawer, what will happen

Also, such models are installed at the hanging shafi without a bottom. Rozmir vbudovanoy tekhnі and shafi is guilty of spivpadati. It’s necessary to tell about the ventilation ducts, which are to be led at the ventilation shaft, to check on them, which should be seen as a cleansing wind, virusha on the street.

Important! Vіdstan vіd vіd vyatki vіd gazovї stove vіd vіd 75 cm. electric stove this parameter is more expensive 70 div and more.

The case of the newly cleaned cleaner is again mounted directly in the hanging cabinet of the kitchen set or on the wall bracket. Ale installation varto rozpochati іz grounding. The socket is to be installed on a safe vіdstanі vіd slabs and miyki.

It is necessary to reconcile the post-cleaning to the wall and the shafi, having worked at the same mark. At the wardrobe behind the help of a jigsaw, the bottom is visible. It is easy to insert a drawstring through the new one. At the upper part, there is an opening, through which we pass through the pipeline. The diameter of the trumpet and open the guilty zbіgatisya.

Necessary tools

Dovge hard.
Jigsaw.
Wooden lining.
Drill.
Creeper self-tapping screws.
Hammer.
Roulette.
Vikrutka.

Installation of a built-in hood

The corrugated pipe must be placed near the closet with a small margin of approximately 15 div.
Mount a part of the furniture or a bracket with a cleaning air at the planned place.
Fasten the povitroprovid until the exit of the tie for additional sealant and collars.
Z'єdnati Іnshy end of the wind pipe to the pit of the ventilation shaft.

Installing air-water channels with your own hands, it is necessary to unique the zayvih virgins. Tse lowering the exhaustion of the system by burning. It is also necessary to install a check valve in the windpipe, so as to cross the check flow again. A trial run can be done after connecting to a grounded outlet. Vityazhka is guilty of bringing it up again quietly, without a bang.

Installation of the hood, which is about to happen, start the next repair after folding the box. To make a box, you can vikoristovuvati tree, MDF. For telescopic cleaners, the windings are selected according to the same principle as for the larger drawstrings. The upper part of the shafi and the side parts are creaking in a row. After tightening, it is necessary to align with the size of the telescopic hood.

Then we mount the lower part of the shafi with a hole for dimar. After the installation of the shafi, it will be easy to open it. Sob ventilation worked noiselessly, rather not vikoristovuvat corrugated pipes, and plastic dimary.

As a ventilation opening above the stove, an adapter is needed to connect the ventilation system.
Yakshcho is great, the necessary povitroprovid at the sight plastic pipe bagzhano with a round peretina. Often vikoristovuyut corrugated. Possibly, for z'єdnannya, you need a column and that adapter.
When installing the corrugation, it is necessary to stretch it so that there are no creases. The stench makes noise while cleaning the robot.
On the branch pipe, the corrugation is fixed for additional clamps.
Seeing again can be carried out neobov'yazkovo at the ventilation shaft. Often the masters of the houses open the door for an additional perforator at the wall and lead the pipe to the street.

Important! It is not possible to fix the installation of a hood with no power supply.

In order to achieve the correct size, opening at the wall, it is necessary to measure the diameter of the breather at the back of the drawstring. For the help of a file, one hopes for an equally rounded opening. You can see the internal insulation and the capping of the wind pipe.

In principle, the axis and everything, please, how to install a drawstring, which will wake up. Naturally, the installation must be manually completed at the same time as the installation of a new kitchen set.

Install the drawstring with your own hands - it’s more feasible for the home master to wind it up in that direction, if the design of the kitchen is completed. Golovna umova - super grounding and grounding attachment (connection metal parts to "deaf" neutral). Zazdalegіd treba vyznachitisya z choice of a particular type of drawing.

How to choose a drawstring

Buying attachments, it is necessary to protect the kitchen and that possession, for which it is assigned. The width of the drawstring is due to but not less than the surface of the plate.

Other important momentє fitting tightness. For a small kitchen, you can add an attachment of medium tension, and for a large kitchen, you can use exhaustive units.

Respect for the next step and for the consistency of the interior design of the interior: it is to fit in harmoniously. With today's latitude, the choice of models is not difficult.

Depending on the installation options, the accessories are subdivided into the following view:

The domes are the most strained, the bells are similar to a parasol with a pipe that comes out of the sky.
Vbudovuvani - the chimney of the model is taken from the closet, while the panel itself is hung during the hour of preparation. Such an option is a wonderful solution for a small kitchen beyond the size.
Flat - the chimney replaces the filter, after which the fitting is compact, prote with a slight tension.

Rozrahunok of the height of the installation of the draft

Height varies depending on the chosen model. An instruction was added to the attachment, in which case it is indicated, on which it is necessary to mount attachments. As a rule, the installation is approximately 65-90 cm from the plate. Revisiting the lower threshold is unacceptable, shards can lead to the melting of the draft, or її okremikh parts. What is the cost upper threshold, you can choose yoga according to your size.

With a vicarious electric stove, the threshold is lower (wine becomes 65-70 cm), and with a different gas stove, the threshold is higher - from 75 to 90 cm.

Variants of dome hood and installation process

Fit the dome type buvayut:

Pristіnі (kamіnі) - їhnє krіplenya carried out on the surface of the wall. According to the annex, they predict ventilation systems, which are designated for fireplaces.
Kutovі - vikoristovuyutsya in rare fluctuations when rotting slabs in the kutka.
Ostrіvnі - їх installed dotsіlne in the kitchens of the great rosemіrіv, zokrema - at the far end, the stove is located near the center of the kitchen. Such drawstrings fasten without a break to the stele.

The material for the preparation of stained glass in most cases is stainless steel or enameled steel, sometimes models are made of plastic or wood. Swimming drawstrings work in different modes. When installed, go out to the street or into the ventilation system of the windpipe, the function of the device will help you to see the air from the premises.

In order to install a dome vent, you need to bring the corrugation to the ventilation system and connect it to the electric line. Sometimes it becomes necessary to build up wiring or corrugations.
With independent work carried out to the cob, it is necessary to complete the possession of kitchen furniture. Then you can move on to the rozmіtka rozmіvannya prilada z rahuvannyam vysot, which is recommended.
For fixing the drawstring, you need to double it or open it for dowels. Supports are fastened to them on bolts. There, the foundation of the wicker arrangement is put on.
Special introduction of the hood is closed behind the corrugation of the wind pipe for additional boundary tightness.
A re-verification of the practicality of the annex is carried out, after the upper casing is pulled on.

Built-in model

Installation of a hood kitchen cabinet. It is also possible to install a hinged panel on a hanging mechanism, for which reason the attachment becomes absolutely addictive, however, such a robot will require singing skills and professional training.

The installation option without hanging-drying is easy. For this purpose, you need to work out the following:

We are next to pick up a scarf, in a roztashovuvatime there is a drawstring. It is possible to use the more obvious one, if you want to have a chance to change the troch. When preparing and installing the shawl, it is necessary to repair the kitchen and the lining of the drafting.
The bottom of the planned wardrobe is lifted to the height of the building itself. Next, the drawstring may be attached to the bottom. The mitzne is being prepared for fixing the side walls to the top of the cap, the bottom is being fixed for the help of eurovintiv.
From the top to fight openings for the wind pipe. For whom you can beat a hacksaw or a jigsaw.
Prepared fastening to the drawstring body. The bottom of the shafka needs to be removed and transferred to the top surface of the scheme by opening it, as it is necessary for the corrugation and the fixing bolts.
After the sighting, that sighting, having opened the body, fastens to the bottom. Then we need to creak the whole structure and install it on a lot of space.
The remaining crochet is the stretching of the wind pipe and it is hermetically sealed. The cable is pulled up to the front prepared socket, after which the attachment can be tested.

In a similar way, the installation of a telescopic hood is carried out: in fact, it is the same model that you need, maybe a sprat design features(Before installation, the stench is not seen).

How to install a flat drawstring

Flat (pіdvіsnі) models, as a rule, do not make a wind pipe. The stench is washing the filter for cleaning. Any kind of a vented outbuilding can be started in the recirculation mode (purification of the air after the additional help of the filter) or in the air circulation mode, over the top. Filters are necessary to change the smallest girls on the river.

The process of installation of the hanging model itself is not foldable. Attachment may be specially fixed - it is not enough to transfer the signs to the surface of the wall. Vіdstan mіzh them can vіdpovіdati openings on the fixed. Having drilled through the wall, you need to hammer in the dowels and increase the fastening of the hung for additional twisting or a screwdriver. A knitted attachment is fixed on them, after which the connections are made to the border.

Installation of corrugations on a drawer

At the time of rozashuvannya ventilation opening above the slab of yoga, with a drawstring zdіysnyuєtsya behind the help of a small adapter. However, in rich vipads, the stench is divided by a great vision. In this case, it is necessary to install a special pipeline for drawing, which can be a smooth pipe with plastic or corrugated on the basis of plastic or aluminum.
When choosing a smooth pipe, round or square, it is necessary to add additional fittings for the back walls to bypass the kutiv. Of course, two adapters are needed: one is for fastening to a hanging extension, the other is for a ventilation opening.
Z'ednannya those sticks are strongly smeared with sealant.
It is possible to hide the windshield in the wardrobe, it is recommended to vicorate the corrugation: it will cost less, before that it is easier to mount it. In this case, there is no need for vikoristan transitions: the corrugation miraculously lights up the kuti.
Before installing the corrugation on the cob, it is necessary to stretch it as much as possible: it is important to speed up the noise that vibrates in the process of robotic drawing.
When choosing the diameter of the pipe, follow the parameters of the outlet opening of the drawstring.
Fixation of the corrugations on the branch pipe of the drawstring is attached behind an additional clamp, and on the ventilation opening - with a special collar.

Over the years, gar is accumulating near the windpipe, so that you can cross the road again, you need to clean the river, or replace it with a new one.

Connection to ventilation

Any booth has a natural ventilation system, until you can connect a kitchen hood.

The work with the connection is clumsy. For her, a special shield will be needed, equipped with an opening for fixing pipes, which will be fixed on the ventilation grille.

The problem may lie in the offensive: the old bagatopoverkhovy booths the installation of hanging fixtures was not transferred. There are no reasons for this and individual ventilation ducts: є one hot channel. When connected with bags, drawstrings at the ventilation system change the pressure again. As a result, odors linger at the ventilation opening of the dry apartments, or (when a ventilated outbuilding and a gate valve are installed), the fittings "smoke" for exhaustion. In such situations, there are a few options for rozvyazannya:

Radical decisions - change of life. Novobuds have individual ventilation ducts.
You can go to the help of fahіvtsya z ventilation, which zdіysnit assessment I will become ventilation and give pleasure to the choice of model, yak can be installed without zavdayuchi shkodi susіdam. If necessary, the ventilator should clean the air vents of the mine.
An excellent solution is the addition of a recirculation outbuilding.
It is also possible to create an individual ventilation system, for which a ventilation opening or a small window leads to the street. For robots, a perforator is used. Requirement to rozrahuvat hіd povіtroprovumu in the kitchen and the most significant appropriate place. When ready, the window is laid with a lattice shield. The corrugation can be seen at the new one.

Choose a place for a socket for a drawer

Preparation new sockets for drawing, it can be carried out until the attachment is installed on the cob. When choosing a socket, it is necessary to ensure that most models of draw-in units are equipped with three-wire wires.

Fenced installed sockets white miyka and white stove. The best option is installation above overhanging cabinets at a height of approximately 2 meters. The socket needs to be moved left-handed or right-handed to the center of the drawstring. If you choose an open space, you can decorate a socket, vicorist special box. Do not follow її for bulky accessories and hanging wardrobes.

From time to time, there are voltage drops at the booths, after all, such a winding motor can burn out, or the singing world will fail. To avoid such a situation, it is necessary to install a grounded socket.

The method of installing which I will add to the old work mode, of which there are 2:

View mode

Recirculation mode

Installation of a ventilation hood, as it works in the ventilation mode, including the introduction of a wind pipe into the ventilation system. For whom, it is important to choose the correct diameter of the winding pipe - it is not guilty to overestimate the permissible parameters in 120-150 mm.

Please! When the yoga windshield is installed, it is not necessary to bend or tighten, which will significantly reduce the loss of tightness: skin turning reduces tightness by 10%.

Vibirayuchi povitroprovid, it is necessary to take the lead, as if to wash a smooth surface, to that corrugated hard trumpet it is necessary to "sound" loudly for an hour of robotic possession.

The installation of a ventilation hood with a carbon filter does not affect the ventilation, so that everything is repeated, like it is consumed, cleaned and re-turned to the reception. The installation of such a hood is easy to do, but periodically change the filters.

It is no less important that those, like the knitted coat itself, should lie in sight.

See the drawer

The drawstrings are:

Pіdvіsnі - fasten over the stove under the wardrobe

Vbudovuvani - are fixed at a special wardrobe without a bottom

Wall-mounted - mounted on the wall

Kutovі - krіplyuyutsya in kutku kіmnati

The islands are fixed right on the stele in any place of the city.

What tools do you need

To install a kitchen hood, you will need the following tools and materials:

Corrugation and a pair of collars for yoga fastening

Grati for the ventilation duct

Perforator

screwdriver

Hacksaw for cutting metal

Budіvelny rіven

Vikrutka

Roulette for rosette.

Installation of the ventilation hood is started, as a rule, from the warehouse - connection of the ventilation hood to the ventilation shaft. The best way is not to break through one opening, larger than the ventilation shaft, but to install an additional box with a special valve, which is more likely to be turned back at the reception.

Yogo axis schematic view:

How does everything work? If the valve is closed (the valve is red rice) - again just go out through the ventilation opening, and if the fan is started, and start the fan, change its position and close the curve one by one, and the ventilation will help to tighten it.

The main task of the entire system is to avoid the wicked draft and the possibility of natural ventilation, which will turn off the windshield.

For arranging the mechanism, you need a spring and an aluminum or plastic sheet for arranging the valve.

From the most possible types of wind pipes, it is better to choose those made from plastic, or from aluminum.

Plastic pipes are too light and don't make noise when working, but before that, it's not necessary to use them, they fit well into the design of the place and don't make any noise.

Aluminum corrugated pipes also do not make noise for an hour of work, but may not be more pleasant old look to that richly someone lays his head over it, how to hide the corrugation in the drawstring. One of the best way vvazhaetsya yoga vlashtuvannya in a drywall bed.

First proceed before installation

Before installation, it is necessary to check all the moments of connecting the hood to the electrics. At the same time, it is important to comply with all the standards of electrical safety, even for a draft in the process of operation, constantly consume a drop of fat, water, and so on, to this end, the case and, in addition, the obov'yazykovogo grounding for the introduction of voltage.

For the connection of the drawer, 3 darts are required: phase, zero and earth. Need for obov'yazkovo to secure the possession of grounding. It is possible to save money for the help of a grounding circuit (like such a one), simply by connecting the wire to the power terminal.

Ale scho robiti, as if there is no grounding near the apartment? In which case, connect the wire to a deaf neutral. For which it is necessary to connect an electrical panel with lichilnikami and know there a pipe with a mustache with wires or a special bus, like a little one:

On it it is necessary to know the shtir, on whom you already know zero darts. It is necessary to throw your wire over them and tighten the puck. After that, the wire is led to the kitchen, and the drawer itself is connected through the automatic dispenser.

The first step is to install the installation, it is necessary to take care of the preparation of the flapper box. Vіn vygotovlyaєєєєєєєєєєєєєєєєєє to the scheme (picture above), or you can use more simple route and attach the anti-rotation valve. The whole structure is installed in front of the ventilation opening at the wall.

If so, you can cook the shafa. For whom it is necessary to expand the lower wall and, before putting down the badge, drill through the hole there. If it is in the wardrobes of the police, then it will be necessary to drill round or square holes in them for the ventilation.

The upper wall of the shafka can be drilled in the form of a square and with a deakim margin (3-5 mm) - for a flap box.

If the shafa is ready, you can proceed to the connection of the wind pipe. For this yoga, it is necessary to stretch through the drilled holes, open it, cut the pipe and bend the called edges. After that, you can put a scarf on the wall.

Important! It is necessary to apply a sealant to the windshield's sticks, so that the drawstring does not lose its tightness.

The extension of the ventilation shaft is connected with the ventilation duct through the anti-rotation box. The cotton is attached to the hat with silicone.

In addition, as the main elements will be connected, you can fasten the case of the drawstring at the wardrobe. Screw the screws on the screws or dowels. The corrugation is fastened behind the additional collar.

Well, it’s necessary to close not the corrugation, but the plastic povitroprovid, just put all the components correctly:

The height of the installation of the extractor above the stove

Another important factor that needs to be checked before installing the draft is the height above the cooking surface of the stove. This parameter is set according to the type of tile:

If it is necessary to install a clean floor over an electric stove, then you should not be guilty of less than 70 cm between them.

For a gas stove, set the parameter to 80 div.

Dotrimannya tsikh parametrіv allows you to ensure efficient cleaning in the kitchen. If the height between the stove and the wicker will be less than 70-80 cm, then heat it up more, so that it can come out of the cooking surface, you can put it on the praciesdatnist place and put some of your important elements.

At the time of installation, I will build it not in the closet, but directly on the wall, you can fasten it with fasteners or build a P-like frame with kutochkiv. Such a frame serves as a superficial support for the drawstring body.

In some places, zvichayní dowels are not suitable for fixing, they are a frequent problem for those who have gas stove pipes for normal fixing. To solve the problem, it is necessary to use long self-tapping screws. On one of the ends, the stench can be cut with a nut, until you can screw the body of the extension.

How to connect the winder to the electric line

The remaining stage is the connection of the draw to the electric circuit. Vin is established in two ways:

Through the outlet

Through a foreign machine

It is even more important to remember about the grounding, about the yak, it was already appointed more. Zavdyaki youmu can tidy up the voltage from the case and the draft fan.

As soon as everything is ready, you can arrange a drawstring in a decorative kovpak and zahisnі povіtroprovodі і boldly koristuvatisya all the advantages of possession.

The installation of a kitchen hood is a simple procedure, especially with all the rules of electrical safety and visibility necessary tools and materials. The first thing, which will be necessary later, so 2 times on the river, cleanse the possession of fat and boil for the protection of the sunburn.

Installing a hood over a gas stove

Video, to help you in more detail in the installation of the draft and selection of the required elements for installation:

Some people vvazhayut for better not spend an hour on the installation of hoods with their own hands, or simply don’t necessary skills, In others, there is no necessary tool, or simply there is no need to engage in physical work. But always know the minds, like all the robots at home, wink, or help themselves to wink. In practice, the installation of a drawstring is just as easy as a robot, and a viconate can wind self-tightening without a helper.

Vityazhka, yak and stove, obov'azkova in the kitchen

For the cob, it is necessary to reconsider in the fact that you have chosen the need for a drawstring. Її the width is due to buti the same as the width of the cooking gas surface or . The tightness of the drawstring is due to the area of the kitchen, to that, with insufficient productivity of the drawstring, it is not possible to clean the air from the combustion products and unacceptable smells. Moreover, it is important to lie correctly.

Fallen in the sight of a drawstring, the next step is to prepare the place, to mount it on the yak. It’s like a domed drawstring - above the stove there can be a place for her. For a drawstring that will come to life, it is necessary to close the closet at a later date. Call them to work at furniture stores for a renovation, for which it is enough to give the furniture selectors an instruction to the drawing: there are reports on the development of your model, focusing on how the wardrobe will work. These parameters are not important.

You may be asked to deprive the sweatshirt for an hour of preparing that choice of wardrobe. What is such a possibility - wait a minute. So the master can immediately reconcile the ready-made shafa and in times of blame is incomprehensible, otherwise, when such a shafi was made, a pardon was allowed (which among professionals is a great rіdkіst), everything can be corrected on the mission, saving the hour.

Modern drawstrings are more stylish

If you need to mount a sizable hanging drawstring - it’s enough for her to get more free space, but the option is not to fill up the drawstring with a vіdkritoy, but to prepare a special wardrobe for her. On the vіdmіnu vіd vіd kіd kіd vіtyazhku, scho vbudovuєtsya, tsey element of furniture bude wear more decorative character. The photo shows that the lower horizontal of the shafi is empty, so that in this empty niche you will place your drawstring.

The domed vityazhka is one of the most intense

The domed vityazhka is mounted according to the same principle - the whole process can be watched on video:

For this material, the maister vikorist's dodatkovo bar, so that the gas pipe fills up with this type of material.

Folding with non-standard drawstrings for: in these cases, the process itself will be special. Such a system is fastened to the stele for additional dowels and special fastenings.

The main folding in the installation is carried out in the installation of the wind pipe: it may be carried out along the stele, fixing through the steps. Bazhano, so that the path of introduction of the yakomoga is straight, without twists and cuts: you can get into the productivity of the drawstring.

What a small place you can get by.

Vityazhka Samsung look at that installed:

Ventilation sleeve

A corrugation is installed on the drawstring in the rest of the bag, and in front of it, a decorative grille with a corrugation opening is installed on the opening of the ventilation shaft. Looking around like this, wanting to use faceless modifications:

They gave the following order:

Freezing stand from the hood to the ventilation shaft, Stretch the corrugation to the necessary length;
Close one piece of corrugation on the back of the window;
Laying the corrugation along the hanging closets to the ventilation opening, do not damage the corrugation: in fact, it’s just a thick foil, so it’s easy to rumple it or tear it if it’s inaccurately laid;
Insert a tip into the opening of the grid.

Vityazhka can also be made with a rodinka interior

It was only left to turn on the drawer in the socket, but there are some nuances. In modern apartments, where the installation of vityazhok has been transferred, You, sing-songly, show one or more rosettes on the wall in the area of the stove. Sound at the vityazhok not a long time ago - it’s not a bad ailment. Prote reach out to the socket of such a cord.

Installation of a sickly hood:

It is richer, as the nearest socket is located here on the right side. Then you will happen to win a podovzhuvach, praising yoga for the optimal “route” of any situation. Behind the bajan, you can install an additional internal or external socket in the reach zone of the drawstring cord.

Navituvannya їzhi in a small obsyazі accompanied by little-receptive additions to the look of nasty smells, boiling and fat. It's easy to solve these problems: the modern winding outbuildings are quickly cleaned up every once in a while.

Today kitchen drawer to piss off unpleasant odors

To install a winding apparatus, they go in for the help of professionals. Tse shvidko, nadіyno that simple. And yet, I also have the right to life. Until then, the installation will not take a lot of time to spare the cost. The owner will not need to worry about the quality of the broken work, so as his own fault, he will try to make everything work for himself. Do-it-yourself installation is another opportunity to destroy your knowledge in your gallery.

Tipi drawer

Type of vityazhny outbuilding technical minds and the obviousness of the way out ventilation shaft. The most popular are filtered, knitted and combined models.

Filtering devices are based on the principle of recirculation. Vіdpratsovana masa is drawn into the middle of the structure, pass through the system of filters and turns back at the place already cleared in the form of smells and fat houses. Install them easier, because they do not interfere with the visibility of the ventilation opening.

Vityazhnі models - tse devices of the flow type. The metal exhaust fan is closed up in the air ventilation duct. The installation is more foldable, so that it is necessary to lead the building to the street.

Fallow, in view of the design features of the built-in outbuildings, are divided into 4 types:

Leather look may be a good type of installation. It is easier to install wall extensions, more importantly - steles.

Correct rotting

Rozmіri vytyazhok zalezhovyut fallow according to the dimensions of the slab or cooking panel. It is necessary to remember that, ideally, the drawstring should be 10-15 cm wider than the cooking surface. If the device is less wide, it negatively affects the quality of ventilation. On the kitchen set, grease and wood are constantly accumulating, and the smell of hedgehog is observed again.

Self-installed hood does not require special professional skills

The height of the attachment will vary between 65-80 cm from the slab. Vіd tsієї size without intermediary lie down in the smoky fat houses and bet. The height of the smaller value is not victorious, the shards are able to borrow fat, as if for a long time they settled on the filters. That and pratsyuvati on the stove with a low-lifted drawstring handlessly. It is not recommended to install more than 80 cm in height, because in such a situation the left part of the by-products of the fire will pass.

The device is installed near grounded sockets. That already bother about roztashuvannya electrical wiring that sockets. The cord is not guilty of hanging over the stove and burners, otherwise it will either overheat or burn out. Conducted by a special cable channel, which is attached to the wall.

Sob the device is working out of the maximum KKD, it’s good at the booth tidal ventilation. For this, we install accessories for primus ventilation and vicorist function of ventilation on windows made of metal-plastic. In the extreme weather, open a flat (only not in the cold season of rock).

Mounting

The installation of a butted hood in the kitchen in the apartment does not become a special folding. Attachment to fasten directly to the wall or install it at the warehouse of the kitchen set. Buying a wall hanging for the kitchen, it is necessary to consult with the seller about how to fasten it, so that you can show it to the machine. Sequence of due date for installation of a wall-mounted kitchen hood:

Folding accessories for great respect and care

I’ll build it with openings for fastening just like the lower edge. Rozmіtku put on the wall and reverify with equal.
If there is already a stove in the kitchen, cover it with a slab or paper to protect it from a saw and wood.
Drill holes for dowels.
Drive in the dowels, tighten the screws, adjusting the dowel.
Fix the povitroprovid with a clamp.
take you to the mine or to the street.
Cover with a povitroprovid casing (for yoga visibility).
Yakscho є, insert yoga.
Connect the attachment before life.
Uvіmknuti that perevіriti funktіonuvannya pristroy.

Installation of a vbudovan hood at the closet of the troch is blown:

On the back or side wall of the opening, open for exit windpipe that cable.
Drill a hole for a wind pipe and drill a hole for an electric wire.
Fix the povіtroprovid.
Enter the name of the pipe and cable.
Close the coat.

It is important to correctly connect the winding attachment to the electrical outlet. Come in and get the electrical safety of the footwear for the dressing room. Like a vipadkovo pardon, you can take a blow with a strum.

If it is necessary to shorten the pipeline, it is not recommended to cut off that part, as it is inserted at the ventilation duct. Optimal solution- Outline the intermediate sections. At the place, where the pipe is to enter at the ventilation tread, with a mounting pin, fill all the cracks and carefully plaster. Tse improve the quality of ventilation and change the side effects of ventilation.

If you want to go straight to the street, then a gate valve is installed from the outer side of the ventilation opening. Vin does not allow people from the streets to go to the kitchen.

Installation of a draft pipe

Connecting a kitchen hood to the ventilation duct is required for additional pipes made of corrugated or plastic. Wimogi to the pipeline is important to do:

The optimal length of the kitchen is no more than 3 m. As a result, the installation may be large, with a skin meter, the efficiency of the work and the addition will be reduced by 10%.
The minimum number of swivel columns, adapters and twists. The more columns, the more ventilation. The operation of the system is sharply increased, and it is important to repeat the name again.
Vigini and turn - all the way under a blunt kut. Kut 90 degrees lowering KKD by 10%. Povitroprovid is guilty of smoothly moving from one line to another.
Smooth inner surface. In this case, the ventilation will be effective, the shards of the opir will decrease again. Shorter version- . Povіtroprovid z corrugations maє ribbing, scho create additional transitions for poіtrya, scho to go out.

The installation process of the windpipe - carefully read the instructions

Mayzhe all models of devices are connected to a round pipeline with corrugations or plastic. Rectangular trumpets look better, to that they fit more harmoniously in the space between the wardrobe and the stele. The diameter may be different, but the area of the transverse cut may not be less than 0.1 m2. All connections are hermetically closed, so that it is possible to turn off the possibility of getting into the kitchen.

Plastic air ducts are lightweight, light and create additional noise for an hour of work. The corrugations may be a little overwhelmed: the stench of the bellies, the lungs, do not vibrate and do not make noise. Ale shdo estetichnostі stench podstuchayutsya plastic sworn brothers.

Povіtroprovid hovayut vіlny vnіshnіy prіshnіy prosіr stіn, furniture аbоut steel. This kind of courtyard has a good stele: the pipe can be easily shoved over the lower level. As such options are not suitable, zastosovuyt decorative boxes that fit the style and color solutions to the kitchen set or wall. With your own hands you can build a box of drywall in the kitchen for drafting. For sale there are boxes for drawing in the kitchen from stainless steel.

WATCH VIDEO

Instructions for the installation of the ventilated attachment are added to the skin model. Vityazhka in the kitchen report instruction with little ones for mounting the apparatus. Therefore, on the basis of food, you can know the source of evidence from the picker.