What is needed, to install a drawer in the kitchen. Different nuances of installing a drawstring. Z'ednannya with ventilation duct

⁰

Mounting kitchen hood| Access to the ventilation shaft Access to the ventilation box | Installing a kitchen hood

UVAGA! RETURN YOUR RESPECT - READ IT!

Vіdstan vіd slab (cooking panelі) before the draw is called the lower boundary.
Ideally, wine is not to blame, but less than 75 cm for gas stove and 65 cm for electric.
When designing a kitchen, use your designer and manager for the respect.
Make sure the right stitching is done in the double stitch - as if the stitch above the stove will be stitched high,you will need to choose a model with a wide, lower cooking panel, surface for the fence povіtrya.

Chim vishche raztashovaniya dome drawstrings, tim mensh effectively out pratsyuvatime!

To the designer, behind the great rachunk, make the kitchen beautiful and cozy for you.Nansi, like a ruffled sweatshirt, praise their lesser world. This is where problems are blamed.
First - ring out the drawer to spread it! high in relation to the stove. This is the main problem with the renovation of the kitchen. Tell the manager about the lower boundary or explain about it!
Another - if you choose to install a ventilation hood at the ventilation box (connect a booth to the ventilation system), open it in the closet, in which a ventilation hood will be placed ( div. photo 01 ).
It’s easier when choosing a kitchen and you won’t need to cry for a job at a connection hour.

The bagats have a reasonable supply of food - why can you connect a drawstring to ventilation?

Vidpovimo - not zovsіm. Ale, richly someone to rob and tse zovsіm is not rare. According to all BNiP, it is possible to install a primary exhaust fan only on the remaining and front surfaces. For clarification - on the remaining surfaces, the additional flow will be at the exit from the ventilation shaft and it will not be possible to cross the main flow from the lower surfaces.

Installed hood over gas stove

The image is clickable. Look at the new window.


Visverdlyuєmo otvіr pіd poіtroprovіd	Mounting the pipe (povіtroprovid)

Entering the opening of natural ventilation	Plastic povitroprovid - transition from round to flat

Installation and connection of a hood | Access to the ventilation box

Connecting a kitchen hood- Price from 1200 rub.

Connecting the ventilation hood to the ventilation shaft - The price is negotiable, from 1500 rubles. in the fallage in the material and folding of the laying of the wind pipe.

Kitchen hoods:

Baths
Telescopic
Rest in peace
Ostrіvni vytyazhki

The stele is laid increased water content in the kitchen - the axis, maybe, the best arguments for the crustiness of the drawstring. That smell of zhі, which is prepared, we want to accept it, but do not start the river.In the "holy hour" of the guilty socialism, such problems were even easier to overcome. The stele was salted - they beat it again. Vologo in the kitchen - they opened a flat, it’s cold, it’s cold, it’s bearable. Not suitable, like the smell of lubricants pork fat- Take a parasol, go for a walk near the park. The person of the present light paths does not shudder, that stele of the ninth is not rich enough to beat.
Kitchen hoods according to the principle of dividing two types: from a closed cycle and from a ventilation system. Vytyazhka from a closed cycle may have a number of natural shortcomings and will develop in quiet situations, if there are other reasons connect to the ventilation duct we can't.

Kitchen drawer with ventilation system - the most optimal and efficient option. However, on the way to kitchen comfort, you will have to go through the stage connection of the hood to the ventilation system . From here it appears that here "htos having buried a dog."

First, connecting drawstrings seems not to be such an easy task, as it could be done on the fly. You can, obviously, connect a drawstring to gnuchka z'ednannya. Tse duzhe is simple. And this option is suitable for those who the aesthetic side can’t crack, even if it’s a majestic corrugated pipe, which overturns the whole room, more “embellishment”. In addition, corrugation and noise for an hour of work.

In other words, just plug in a drawstring may show up a little. It is possible to make some changes in the design of the box itself. For the correct operation of the drawing, a forced draft is required. And, if you have any doubts, the regular fan is not able to independently turn on the windshield. Ideally, a hood can provide ventilation to the premises without the inclusion of primus ventilation. With a zagal with your own hands, you can connect the drawstring so that the hour, if it didn’t blow, will give you paradise.

One more folding stage: installation of a draft cone and a connection to an electrical outlet. The height of the position of the cone above the slab is ideally due to depend on the height of the application, the intensity of the wind exchange is also low in the parameters. Look at yoga navmannya - the last thing you can do. In this way, with a correct connection to ventilation, the drawer can unsatisfactorily degrade its function.

Connecting to the electric circuit will not become an easy walk, even if it is necessary to work so that you do not fall into the vіchi. The best option is to connect a drawstring without connecting to a plug. Tobto, bezposeredno to the edge. With any trace of memory, no one has lost the electrical safety.

Good, that all the work can and should be shifted to the shoulders of professionals. Zim don't call. With good knowledge of the work of our company with kitchen hoods, and not only pobutovymi, we can say that the simplest situation is transformed into a right puzzle, but you can only know for sure. Would you like to earn this fortune at your pardons, if we have?

You, sing-song, do not forget that the kitchen arable is far from miraculous. To escape yoga, ventilation is thought out.

Ventilation in the kitchen with a draft

Por_vnjano іz zvichaynymi ventsistemah vitazhka in the kitchen vikonuє its function primusovo and pratsyuє іz we heat and zarudnennym poіtryam. Vykhodyachi z tsgogo, it is guilty of being protected from the influx of high temperatures and the steam of boiling fat and olії.

As for other appliances that are going to be built, it is necessary to respect the dimensions of the kitchen space for the drawers. And also square panels for cooking, over which stench they are mounted. It’s like a parasol is more likely to bury the slab - then it’s a turn again, which is cleaned, it will be insignificant. This explains the popularity among buyers of models that allow the width of the parasol to be 600x900mm, similarly to the expansion of standard cooking plates.

According to the height of the ventilation umbrella, it is possible to move out of hand fire safety. Chim, naskіlki is possible, lower, tim better. In a word, stand between a stove and a parasol: 500-650 mm.

It is important to take into account the productivity, depending on the volume of the kitchen: for example, for a kitchen with a volume of 30 m3, it is necessary to add an attachment that will process 300 m3 / year every other day.

Ventilation in the kitchen with a volume of about 30 cubic meters.

Be a Yaka ventilation ventilation pratsyuє tsіlkom normally, as if the infiltration is correctly done - the need for a fresh wind before the arrival. It will take care of the addition of tidal primus ventilation, it will take care of the help of the weather, when calls come. Dodatkovі small-sized tidal installations are suitable for apartments yakraz. Zavdyaki vіkna (not plastic) and doors can be perfectly sealed.

Ventilation of the kitchen equipped with a gas stove

Ninya at the rich budinkas near the rural masses are installing gas stoves in the kitchens, vicoristing like for cooking food, and fodder for home thinness. Immediately put fittings for driving water. Therefore, it is necessary to ensure the necessary post-replacement, which contributes to the temperature and temperature regime of the conditions of life.

For example, the internal volume of air in the kitchen with a gas chotyriconfork stove can be up to 15, and at the same time from a water heater - no less than 21 cubic meters. The height of the kitchen space is not less than 2.2 meters. The new one has a clear view of a window with a flat and a ventilation duct.

Alecia is not enough. The concentration of fumes and water vapor (salting 1.0 m3 of gas sees 2 liters of vapor) during the day can create a microclimate higher, lower at the forge. Crimean duct ventilation, to have a gas stove with a windbreaker (for the obviousness of the water heater obov'yazkovo).

Plastic ventilation for the kitchen

Boxes. Ventilation channels for connection vented outbuilding can be made of colored PVC (round or flat cut) with diameters 100, 125 or 150 mm. The stench harmoniously fit into the modern kitchen interior.

Plastic boxes for kitchen ventilation

The most requested box for a butt hood is 125 mm pipeline, which can pass through the building 400 m3/year. Smooth surface plastic box repair the minimum opir ruhu again. Vin is noiseless, long-lived, and easy to see.

Noodles:

more high versatility of galvanized channels and flexible wind pipes;
the presence of anonymous components and the exchange of PVC-ducts.

Advantages:

- smooth surface and aesthetic appearance;
- schіlnіst thа mіtsnіst z'єdnannya, dovgovіchnіst;
- Lighter and easier cleaning.

Thin installation of plastic pipes. Because of the large air pollution, it is wound through the ventilation duct, which complicates the installation of the ventilation hood and the connection to the air duct, because planning that kitchen furniture does not always allow you to mount a drawer next to it. Great pressure on the windpipe (because of the absence of viginiv) reduces the efficiency of the robotic ventilation system, and the noise increases.

Renovation of ventilation in the kitchen

The ventilation system must be cleaned regularly. It is recommended to work on your own. As if, through the goodness of the aftermath of the tidying up in the booth in the quiet little huts, you can again pump the purchases out of that saw, and the sign is hung with a smoke sickle, then the time has come to clean the ventilation. Stuffiness and heat, especially in the kitchen, are also signs of a decrease in the practicality of the ventilation system. Arkush paper, bringing to the ventilation grate, do not hit - I still have problems with it. A lot of people are interested in what specialists can do to improve ventilation.

Revision of the ventilation box may have a few steps:

1. Back to back, access to the overhead lines is secured - they are dismantled earlier than the overlapping of the walls, and (if necessary) the necessary part of the tile on the underside is inspected.
2. Materials are being selected for the installation of external or secondary elements (channels in the wind pipe and inter-channel partitions).
3. Spare parts are inserted into their place and are securely fastened.
4. After resuscitation of the internal space, the construction of the box itself is repaired. The most common materials are high-compact pinoblocks or gypsum tiles, which can be highly soundproofed, waterproof and fireproof. The selection of other materials is not bazhany.
5. For example, a re-verification of the functioning of ventilation and the surface decorative decoration of the box is carried out.

Installation of ventilation in the kitchen

Povitroprovid is not guilty of tightly closing the ventilation duct, otherwise, when the attachment is turned on, the wind turbine will continue through natural draft. Protyag, especially in the kitchen - bad for health. Under the hour of designing a sweatshirt, it is necessary to follow it, so that the construction of the yakomoga is short. smallest number turning and bending, like the walls became smooth.

Selecting the type of the ventilation duct, focusing on the distance of the ventilation duct from the plate for preparing the hedgehog, as it was intended to be higher. Moreover, vrakhovuyut - the larger the diameter of the vent adapter from the vents in the air conditioner, the less energy is needed for efficient robotic ventilation.

Vibirayuchi vityazhku, zvertayut respect for productivity. There is no need to overdo it with її tightness. Vityag is selected according to the diameter of the ventilation channel, because on the efficiency of its functioning, the exhaustion of the fan is not so affected, as it is at the opening of the ventilation duct. In the other case, with a non-existent KKD, the electric fan slows down the overworld amount of energy and “sucks” in the air, proshtovhuyuchi great airflow through a wide channel. Fans on small and medium speeds can increase productivity.

Yakіsna ventilation of a booth (apartment), especially for additional premises, is not an element of living comfort, but a serious necessity, and your health should lie in it. You don’t need to rely on the modern air conditioning system: the stench doesn’t clean up every once in a while, but rather heat it up or cool it down.

Nasamkinets should designate that when you choose to be a house, think about the winding up later, at the project, and when you buy a life, I’ll especially respect you for the ventilation!

Today, our kitchens are equipped with all new new technology. So, apparently recently they began to install a drawstring over the kitchen stove. And if you have an idea to buy a possession, then you can post a nutrition: how can we install it correctly? Vidpovidi two. Or ask a specialist, or else you can get up to half the cost of the drawing for the work. But work everything on your own, on which you can drink a lot of time that strength. And if you install the hoods with your own hands, you can ensure the exact fit of all yours, you can build it yourself the way you want. At this article, it will be told how the viscounts installed the hood in the kitchen according to the rules independently.

Pick up a drawstring under the headset

You see a drawer for the kitchen

Before the cob of rozpovidat about the installation of stained glass next to the nobility їх tipi.

Flat drawstrings. Roar them out of the metal, move them over the cooking surface. May everything work in the recirculation mode. Vikoristannya filters allow you to remove fat, because you do not have a special opening for ventilation, or there is no need to stretch the corrugation.
Vbudovuvani drawstrings. This type of vikoristovuєtsya in small kitchens, de nayavnіst vіlnoї ploschі obmezha. Such possession attaches itself to the closet and gradually improves its functions without the presence of a veil to the oil-trapping filters. Filters need to be changed at least twice on the river. Sound the vbudovuvani ventilated hoods in the kitchen to be equipped with a hanging panel, which allows you to increase the area of the fence of steam from the plate.
Swimming drawstrings. Najdorozhchi, al and best suited for a stylish design of the interior of the kitchen. Vygotovlyayut dome vents sound from metal, or you can build a body from wood or skla. The price of the model is to lie down according to the material prepared and the tightness of the dampening.

Note

By choosing that chi іnsu model, sіd zavnuty respect for the presence of the recirculation function. Not all drawers can have such a regime. But if there is an open ventilation duct in the kitchen, then the presence of such a function is simply obov'yazkovo, otherwise there is no sense to mount a drawstring.

May all models be equipped with grease filters. The periodicity of your change should sound once in a while. In addition, the term of the filter service can be continued for a little while, so that it should be washed periodically with a special method. After the washing of the filter is due to hang out for 1-2 days.

For the installation of a drawstring, as well as more work, necessary appropriate tools. It is best to prepare them ahead of time, so as not to spend an hour on jokes. You need:

Drill chi perforator. Vibіr fall in vіd you. It’s important to use a perforator for better practice, and for someone else, a drill is handy. Ale, you can’t forget about the place, de vie you will beat this instrument. Yakshcho installation of transmission drilling opening at interroom partitions, then pidide drill. Also, it is necessary to drill concrete overlays, rather choose a perforator.
Screwdriver.
Budіvelny rіven that roulette.
A hammer.
Fallow in the construction of a drawstring, you may need a nut wrench.

Installation of a ventilation hood in the kitchen according to the rules: step-by-step instructions

Depending on the model of the draft and the situation in your kitchen, the draft can be installed in some options. Let's take a look at the skin of them.

The first of them is the installation of a drawstring in a wardrobe. For such an installation, flat and vbudovuvan vents are suitable.

Before starting the installation, add a special hanging cover to match the style of your kitchen set. Yogo vіdmіnna rice - the bottom of the day, the drawstring crepe to the middle police. Before zamovlennyam shafki sled z vіdstannya in the lower edge to the middle police, tsey rozmіr is to blame for the rіzmіrіm vyazhki. Otherwise, the design is visible from the caps and psuvatime old look. Sound, tsia vіdstan become no more than 15 cm.

It is also necessary to remember about the wind pipe, as such a transfer to the structure. For the new one, it is necessary to open the door to the middle police and dahu shafi. The diameter of such an opening itself lies in the type of drawstring, but does not exceed 12 cm.

Since the scarf has been delivered, we fasten our drawstring to it. For these purposes, at the upper plane of the hood, open or open any other roof extensions. Fastening is used for additional screws or bolts. At another vapadka, it is necessary to drill open in the middle police shafi.
Then it is necessary to fasten the scarf on the wall. If there is an unregulated "wow", then it is necessary to reconcile it resolutely. However, there are universal fastenings that are hung, that are fastened behind a metal smuga on the wall, a slight sway is acceptable (in the range of 0.5 cm.)

Installing a draft in the kitchen in this way is simple and aesthetic. For the help of a wardrobe, you will attach the entire structure, including a refurbishment (as such a transfer of the structure). To reach a new “hooked” bag, it is advisable to place a socket for drawing a drawer in the middle of the hat.

Installation of a hood under the closet

For this type of installation, it is suitable to use a flat-panel hood with a recirculation function. The stench is miraculously suitable for families; Do not forget that the height of the installation of the draft can be important influencing the efficiency of winding.

Basically, with this option, the model will be fixed without the help of the winder. And if it’s necessary to mount the povіtroprovid, then open the next step to prepare the back. Wrap in the bottom of the cap rounded open. The specified diameter is due to the confirmation indicated in the documentation before drawing.

The shafka itself is mounted like in the first version. Golovne - to be named from the height of the fortress. It is to blame for the efficiency of the work of the drawstring, with which it is harmonious to fit into the main kitchen set at the stove. Let's sweat until the new for help, attach a drawstring. So that the design does not give a good look, you can attach it to an additional false panel. The panel is selected, similar to the facade of the kitchen set, and with the help of special glue or double-sided adhesive tape is attached to the drawstring. It is possible not to work, but to di varto choose a model of a drawstring, what to go to sleeping interior kitchens.

Mounting the hood on the wall

The third option of installation is on the wall. This option is acceptable for any model of a drawstring. Vіn the most popular and the least.

The first thing that needs to be done is to freeze the slab until it is drawn. In order to minimize the efficiency of the work of the drawstring, follow the rules of singing. The minimum height of the installation of the possession is not due to but less than 50 cm. For the maximum height, a boundary of 80 cm is set.

Close the drawstring to the designated line and designate the place of fastening to the wall. For the help of a drill or a perforator, open it to a depth of at least 5 cm. Then drive plastic dowels into them. If you have a flat winding, then fixing is carried out for the help of two screws. If you mount a dome structure, then the place of reinforcement can be no less than a few.

The very scheme of fastening can go all at once from a drawstring. Ale, remember that you didn’t know, don’t get confused. You can look at ours.

Installation of a povіtrovodu

The process of installation of a wind pipe can be done in a richly folded way, lower than the installation of the draft itself. For the needs of the robot, prepare the necessary materials and tools. So, you need:

Corrugated tube. Її diameter to lay in the mark of the drawstring. Dovzhina is picked up on the spot, she won’t lie down in the air in the air ventilation shaft.
For fastening, you need different clamps.
Special ventilation outlet. Vіn pіdbiraєtsya zalezhno іnіdіmіdіm іdаmetriа korruvanії tube і rozmіrіv vіd vіd vіdіnіyniy sіyі.
If you have tried to mount a windshield made of plastic, then you need a nozzle for a drawstring. Vaughn may be the same diameter, which is to be found in the design model. One side of such a nozzle has a rectangular shape.
Plastic pipe of a rectangular profile. Її it is necessary to choose for the size of the nozzle on the drawstring. Take it from the stock as soon as possible, easier to order, lower the bag in stores and shukati shmatok, which is rejected.
Special r-like transition.
Outlet for ventilation rectangular shape.

For more reliable and hermetic installation, stock up on sealant and masking tape.
When installing a wind pipe, follow the following rules:

It is impossible to sound a trumpet without consumption. In the wake of the next memory - the larger the diameter of the windpipe, the larger efficient work drawstrings.
Varto uniquely viginiv, otherwise you can block access again, which can be put on the robot of the hood.
Remember what corrugated pipe finish the material “lower”, do not tolerate rough mechanical intrusions. If the pipe is torn, you can try to seal it with additional adhesive tape, but it does not give a guarantee of tightness.

Dotrimuyuchis tsikh rules, you can easily install a povіtroprovid, with which you can high efficiency robotic drawstrings.

When installing a drawstring, basing on the dosvid fahivtsiv, varto dotrimuvatsya deyih rads.

When installing, it is necessary to focus on the growth of the master. If the height is lower than 160 cm, then it is better to install the drawstring lower. For this type of fall, it is optimal to use a stove between a stove and a drawstring of 60 cm.
Do not varto roztashovuvat yakіs droti over the outhouse. First, if I destroy the fire safety technique, the darts can be fried and fired up. In another way, tse psuє zagalny aesthetic look. Wait a minute, hanging over the little darts of the darts only to draw a big picture.
Whether there is any kind of attachment with a robot, you can see noise. If you didn’t add the model of the drawstring, you’ll still be noisy. To reduce noise, varto vikoristati plastic povitroprovid. Yogo design features allow the noise to be reduced.
When installing the hood, please pay attention to the instructions that need to be added. He has shown all the recommendations as soon as installed, the stench is viable for the improvement of the great exploitation record.
As if standing at your booth is crushed with sibitu, you can beat simple self-tapping. This should make the process of installation easier, moreover, the fixing will be finished overhead. Ale, here it’s definitely a smut to open up the place of installation. This material is easily screwed up, and it will be impossible to re-tighten the screw.

Now you can boldly proceed to the installation of a draft in the kitchen, in which there is nothing folding, all if you have to work up front. Golovno dotrimuvatissya all recommendations and instructions to attach and then your hood will work for a long time and effectively.

Buying a drawstring in the store, you chanted over food, but who else and how її will be restored. The options, really, are not rich: either call the master, who will ask you for the installation of a sub-log of the vartost attachment, or independently. We suggest to you yourself, our article is about those, how to install windows in the kitchen with your own hands.

See the drawer

However, it’s not like we’re holding a drill in our hands, but we’ll tell you about all the options for outbuildings, like to show off modern stores:

Flat models - with a suspended structure, as they are installed above the stove. Almost all models have a recirculation mode and special filters to remove fat. Ale tse yakscho you don’t have ventilation opening, otherwise you just don’t want to stretch the corrugation. The main body material is stainless steel.

Note! Installing a kitchen hood for a flat model is installed directly on the wall, so it is necessary to stock up on flowers. Attached to the plasterboard wall, I will attach a nebazhane, or else lay the back of a wooden beam from the lower side of the gypsum board.

Vbudovuvani vytyazhki are intended for small kitchens, de be-yaky prostіr ide in reserve. Attachment is secured in the hood and can be used without a wind pipe, with a grease filter. More models may have a hanging panel, which will increase the area of the fence around. The quality of the filter is collected in the region of 500-700 rubles, it is necessary to change it 1-2 times per river.

See you! Fit, which are used, they are used by the most compact ones, at the same time they are not much blown away from the front models.

Bathing suits are named so because of their shape. The stench is the most expensive, but the most relevant for today's and stylish places. Framing can be cursed, sucilnometal or wooden. The price for the dome model of the temple is for the material of the case and for the ribs of the tightness of the dampness.

Keep in mind that the recirculation mode is not on all models, so when buying equipment, do not forget to reconsider what you buy.

If you don’t have a ventilation duct, then without any regimen, the windmill will lose its value. Won't you povitroprovid nadvir vityaguvate?

If there is a lot of grease filters, then it is necessary to change them in the world of confusion. The average reliability of the operation of the filter pіvroku.

And you can continue for a few more months by washing them with your own hands. The best, splendidly, soak in dishwasher but if it doesn’t, then try it under a jet of heat and draw 3-5 strands.

Important! In order for the filters to be completely dry, it may take 1-2 days.

Tools for robots

Perforator or drill. What is better - to tell you, but if concrete walls, then, insanely, effective will be an accessory from the function of a windbreaker.
Screwdriver. Become in good condition, like for wooden walls, so for Siberian structures.
Roulette.
Budіvelny rіven.
A hammer.

Even if you don't use it, the additional tool can be rented from a health shop.

Installing a hood

Options for installing a hood in the kitchen

Іsnuyut different ways of installing a kitchen hood. All the stinks are different among themselves, so we can look at the skin of them.

Installing a hood

For whom it is necessary to fix the okrem shafu under the electric appliance. The main feature of such a hat is near the depth of the bottom, the drawstring is fastened to the middle police.
Stand up to the police station by the height of the outbuilding, in the middle it is 13-15 cm wide.
So, as if the connection to the ventilation duct has been transferred, it is necessary to open the door to the air supply and to the police in the hood. The diameter of the opening is equal to the diameter of the corrugations. Most often on models that are to be worn, the diameter is 10-12 cm.
On that square, which is fixed to the police, open 4 open. You can tighten the screws, or drill through the cracks in the police. Leave everything in the same way as it is fixed in the kit of your hood.
The offensive crochet is the marking of the hanging shafka. If the “woo” are victorious, if they are not regulated, it is necessary to adjust the height to the nearest millimeter. Universal fastening, like awnings, which are chipped for metal smuga on the wall, then, in this case, a slip of -/+ 5 mm is permissible.

It is so easy and aesthetically pleasing to install a drawstring in the kitchen: you attach all the non-essential details behind the doors of the wardrobe, and you can hide the stretching of the corrugated pipe. Obviously, your drawstring can be recycled in recirculation mode.

Note! Run the outlet directly into the wardrobe, to help you hide the slack wires, which will create an aesthetic look of the kitchen.

Installation of a hood under the shafka

Another way to fasten the drawstring, only now the attachments do not fit into the middle of the furniture, but fasten to the lower part of the wardrobe.

As soon as you lay the windshield, open it round the back, with a diameter equal to that indicated in the instructions for the drawstring.
The shafa is fastened in a similar way, like in the front section.
The drawstring panel needs to be attached. For which vikoristovuetsya similar material, from which facades are prepared. Installed as a false panel: either double-sided adhesive tape, or special glue.

See you! This option is suitable for minimizing drawstrings, as it is easy to look in the interior. Don't forget that the height of the installation of the kitchen hood influences the efficiency of the ventilation.

Mounting the hood on the wall

This way is the simplest and most important.

We are next to see if we can stand up, as if to be roztashovuvatymed between a stove and a sweatshirt. Remember that the minimum height is 55 cm, the maximum is close to 80 cm.
Apply a drawstring to the armchair line and circle 4 marks along the rear panel of the extension.
Drill open with a drill 8 mm under the dowel from a minimum dowel of 50 mm.
Tighten the two upper screws so that it is possible to hang a drawstring on them.

If you want to hang on top, then open it straight, open the metal in the back panel, screw the screws in the bottom two dowels.

The scheme for installing a hood in the kitchen sounded like a skin hood, if you didn’t know it was included with your hood - don’t get confused. On the skin model on the Internet - all information.

Below is a photo sling, which shows different ways fastening of kitchen drafts.

Installing a povіtrovodu

This process can be given to you in a richly folded, lower installation of a hood.

For the new varto, add:

corrugated pipe required diameter that dozhini. Sound at the dovzhina pipes are sold in piece virobs: 1 m, 1.5 m and 3 m.

Tightening clamps - 2 pieces.
Ventilation exit. Attached to the wall, it is not only suitable for the diameter of the corrugated pipe, but also for the dimensions of the ventilation opening.

If you want to buy plastic, then you should buy:

Nozzle on a drawstring with the required diameter. On the other end of the nozzle, the virib may have a rectangular shape.

Features of the working moment

If you think that the information described above is to be read out for the installation of self-tightening, then you will have a little mercy.

Dany gave revenge on the worst important moments working process, which can be blamed for various furnishings.

Povitroprovid cannot be sounded on its own, without necessary reasons. It is also possible to damage a corrugated pipe, as if crushed from foil. It is also not safe for such a crying death, gostri die. I vzagali varto dotrimuvatsya offensive rule: the larger the diameter of the wind pipe, the more effectively it will wind up again.

Note! Even though the corrugated pipe still suffered for an hour of installation, you can try to glue it, for which the pipe is a special adhesive tape. But, unfortunately, it is not possible to guarantee the effectiveness of such an adoption, because the airtightness of the wind pipe will be destroyed anyway.

The productivity of the drawing decreases due to the recirculation regime: Therefore, if you gave a model with a capacity of 200 m3 / year, then do not forget about the larger one. Do not varto call the store, de wi attached an attachment and vimagati replace the attachment.

Please! If you have won the victorious filter, then it is better to look at the strongest options. Tse not stіlki appear on the vartost, skolki will be clean and fresh in the kitchen.

Orientation when installing the hood following the growth of the master, as I prepare to go. If the growth does not exceed 160 cm, then you can move between the stove and the attachment up to 60 cm.
It is not to blame for the daily darts over the stove, for the sake of an aesthetic look, and for the rules of fire safety. It’s best to put the socket on the drawstring rib, so that it wasn’t visible, and the risk was lowered. Even though it’s impossible, stretch the pouch behind the wardrobes and fix yoga on the ledge.
Who would not tell you anything, but the sweatshirt works with noise. Find accessories that work in the recycling mode. Abo vikoristovuєtsya plastic povіtroprovid.
The correct installation of kitchen hoods is based on the instructions that are given. Follow the recommendations given by the picker.
The installation of a kitchen hood in a private booth on the wall from a sibita can be installed without victorious flowers. Take a long screw and screw it into the wall.

Important! If you twist yoga, if you twist it, then you will have to re-wire the drawstring. Sibit is easy to crumble when the screw is screwed again and may weaken in the future.

Let’s hope that everything will help you to do without excesses when installed, you can’t understand.

Visnovok

I would like to say that all the information was written in this statute in a literal way.
It’s not only for people who don’t fit a drill in their hands once, but for alarm clocks, as they stick with the installation of a windbreaker. Everything seems to be moving forward.

For more information, we encourage you to look at the video: the installation of a hood in the kitchen professionally.
You can get familiar with the new process by stages in person, pay attention to important moments and know the evidence for food, what to cackle.

If you want to ensure the cleanest possible air in the kitchen without vapors, fat and smells, then you need a jasmine extract. Choose an attachment following the design and productivity, but no less important is the installation of a kitchen hood. Before the speech, work everything with your own hands without becoming especially foldable.

Features of the installation of kitchen hoods

The installation of a ventilation hood in the kitchen is carried out according to different principles depending on the type of construction:

If the technique can be used in the recirculation and ventilation modes, then the installation of the transmission of the ventilation pipe to the external ventilation system. Here, you should correctly open the diameter of the windpipe (wine may be in the range of 120-150 mm). The windshield doesn't sound, you can't bend the naskilki and wait - it helps to minimize the strain. A square or round windshield is being installed - but it is smooth, not corrugated, otherwise the noise effect from the drafts, which is used in the kitchen, will increase.

Use drawstrings, which are less effective in the recirculation mode. The second main element is a carbon filter. Such attachment is not connected to the ventilation shaft. Look at what is in the middle of the structure, when passing through the coal filter, it is cleared, after which it is again thrown into the room. Vugіlny filter kupuetsya okremo. It is easy to connect attachments to this type correctly, even though its productivity will be lower, lower in a universal design.

Methods that allow you to correctly install the hood, ventilate, fallow, depending on what is installed on the hinge.

Tools and materials required for work

Do-it-yourself installation of a kitchen hood requires special accessories and tools. Deyakі from them will be in the kit with equipment, and deyakі (like, for example, fastening or a coal filter) will happen to buy an okremo.

For installation you need:

Corrugation, which allows the air to be blown out of the entrapment without being in the middle of the ventilation duct;
Grati for the ventilation shaft - the place where the corrugations were installed looked aesthetically pleasing;
Fastening (fixator) corrugations - 2 clamps.

Also, the installation of a hood in the kitchen, due to the presence of offensive tools:

Screwdriver or drill, perforator;
Vikrutka;
Roulette and olive for rozmіtki;
rіven;
Knife for corrugations.

Vikonuemo installation of a hood - the stages of the work carried out

First lower rozpochati installation, it is necessary to rozrahuvat, on a yakіy height hang a vent. Vlasne process of installation by one's own hands can be carried out on the basis of a sprat of steps:

Fasten the fastening of the drawstring to the wall.
Connect the attachments to the air-conditioning system (otherwise, place a carbon filter in the middle).
Zrobiti electrical connection.

There are two main nuances of fastening the drawstring to the wall:

Priestry is guilty of mounting with maximum arrogance;
The next step is to correctly measure the thickness of the plate before drawing.

What is the height of the installation of a kitchen hood? Tse to deposit and in type її type, and in type of cooking surface:

How the model is installed for electric stove then, you know, it’s necessary to hang attachments on the yak, to become at least 70 cm;
For a kitchen hood, the minimum height is 80 cm.

Deyakі maistri, yakі vіddâtâvayut do-it-yourself installation, sverdzhuyut, scho і for gas, і for electric cooker optimal vіdstan - 700 mm itself. In fact, such a height is important enough to ensure that the draft in the kitchen (to recirculate, before the kit includes a carbon filter), could effectively clean the air in the working area.

Also marvel at our other materials:

However, it’s important to understand that the type of gas stove can be heated up again - you may not get tight in the oven, the filter or other structural elements will be damaged. To go out, saving the minimum allowable distance, to see the practicality of the fittings, and if you screw up the fittings at a higher height from the stove, you can just spend it in tightness.

Further robots with the installation of hoods in the kitchen with their own hands lie at the foot:

The kitchen drawer must be raised to the wall. Here it is important to correctly draw up the height above the stove and mark the mark. It is necessary to mount attachments along a special axis, which is in line with the center of the cooking surface. More shortly, as the selected drawstring may have eccentric fastening - the screw allows you to adjust the nuances of the stitching of the technique over the plate within 5 mm.
It is necessary to install a winder and connect it to the air duct system. I’ll build the position so that the structure of the boxes is minimal. The installation of the air duct is to be installed to the ventilation duct, which is recognized for remote ventilation from the premises. It is possible to install a windshield at the ventilation duct for the help of a special sleeve. Z'ednannya, as it happened, is clamped with clamps and coated with silicone for tightness.
Virishiti nutrition, how to install a hood in the kitchen is impossible without electrical connection. The pressure I will attach, as a rule, is small - it does not mean that a special rozrahunok is not needed to cut the darts, or the installation of a okremny zakhisny machine. Bazhano transfer to the kitchen at once and hide yoga at the wall. If it wasn’t broken, then you need to plug in the socket of the call and plug in the wire, shove it into the outside ventilation duct.

Features of the installation of a vbudovuvannoy hood

Installing a hood, which is to be done, is entirely possible with your own hands, if you want and can have your own particularity. Here, it is also necessary to correctly raise the height above the stove, but the main nuance is in how the attachments are attached.

The model in the kitchen is not necessary to be hung up to the wall - it is fixed in kitchen furniture, near the closet with a specially embroidered tacked empty. Before speech, so you can connect it yourself recirculation drawers– їхної tightness will be enough for small kitchen applications.