Installation of decorative panels on the wall. What are PVC plastic panels. The nuances of preparing the basis for processing

PVC plastic panels are the optimal solution, as the main task is a minimum of zusil and vitrate. The stench is easy to install, and the choice of colors is superbly majestic. PVC panels won the popularity of corystuvacs immediately after the emergence of their versatility, practicality, aesthetics and economy.

What are PVC plastic panels

PVC plastic panels are a polymeric building material that has gained popularity from the moment it appeared. To the warehouse of panels enter light, hard and mіtsniy polyvinylchloride. Therefore, lining the walls and walls with plastic panels is often seen at residential premises, in offices, shops and shopping centers.

Decorative tiles are applied to the original PVC panels for the additional thermal coating, offset coating or lamination. The surface is covered with a ball of matte or glossy varnish. Such processing improves wear resistance and gives the material antistatic properties, resistance to UV-vipromination and underwear.

When virobnitstvі plastic panels not zastosovyvaetsya shkіdlі vі chovini (phenol formaldehyde resin), scho rob pokrittya not shkidlivim for zdorov'ya. For farbuvannya PVC lining vikoristovuyut farbi on a water basis.

PVC panels are produced in a wide range. The stench is different for the texture, for that form. The great vibіr allows the establishment of "plastic" ozdoblennya in different places: starting from the toilet and the bathroom, and closing the hall in front of the rest.

Advantages and shortcomings of PVC panels

The popularity of stosuvannya material is swayed by a whole low advantage of PVC panels:

Negative characteristics of decoration with PVC plastic panels:

1. Insufficient resistance to ultraviolet - white plastic may need an hour to get that cob ovnіshnіy look.
2. Low impact. Obviously, there is an insignificant amount of PVC-panel damage in the absence of vitrimat, but it is not included, that there is no indentation and deformation. Mіtsnіst virobu lie vіd vіstu vіstu vіstu plastic kreydy - tsey zmіst vyznaєtsya vyrobnik. To pay for the purchase of long-term plastic, the next thing is to give special respect to the choice of the picker company.
3. Specific smell. Deyakі spozhivachі znachenyat, scho on the cob vikoristannya (stretching for a few days) is taken off the unacceptable smell, which from time to time will be known.
4. Virobniks didn’t say so much about the safety of plastic, they always get fed up. Plastic, for its environmental friendliness, is in any way compromised by natural materials - wood and stone. Looking back at the installation of PVC panels, it is not necessary to hang out in children's rooms.

PVC plastic panels: see the characteristics

PVC panels should be classified in the fallage as a recognition: stel'ovі or stіnovі.

PVC plastic panels for walls are ventilated by increased strength, reduced bending and building to show mechanical advancement. The tovshchina of such plasticity is greater, lower insole panels. The hardness of the material is due to polyvinyl chloride. The inner ribs of the hardness of the wall plastic PVC panels can be 1 mm wide - cut with a knife such plastic is no longer visible.

An important factor that determines the plasticity of plastics and cannot be overlooked when choosing is the size of PVC plastic panels. The fallow, according to the width of the panels, is divided in the same way as the backing material.

Plastic lining. The length of such panels is 3 m, the width is 10 cm (inode -12.5 cm). Lining zastosovuetsya as for ovnіshnoї, so for vnutrishnyoї obrobki. A good look to the material is the middle between wooden lining and polycarbonate. Two popular options:

• "Polka" - with a narrow castle border;
• "European" - with a wide lock.

Zovnishnya PVC lining can be seamwise. This is explained by the fact that plastic can have a high coefficient of linear expansion. To that, a call was installed for the lining of the maє “grati” - collapse under the temperature change. The additional peculiarity of the facade lining is due to the fact that the color pigment is added to the syrovin at the stage of production, and not to the beast. The leaders of this technology PVC lining for a long time saves the cob color.

Plastic PVC sheet panels can have a large width - from 80 to 203 cm. The length of sheet plastic reaches 105-405 cm. Deyakі vyrobniki give the surface of the leaves of a special processing, after which the leaves become soft and strong to mechanical strength.

Sheets of PVC panels are mounted with additional glue and colors, and the slots are sealed with a narrow lath or sealant under the color coat.

PVC panels. Popular materials are 260, 270 and 300 cm long and 25 cm wide. Panels with a width of 50 cm are used for veneering. The chosen one seems to have an unremarkable seam.

In the other category, you can include plastic PVC sandwich panels- modern building material that has high performance characteristics. PVC panels are stacked from two sheets of plastic. To add to the material of heat-insulating vicarious layers, there are different fillings: foam polyurethane or foam polystyrene.

Plastic sandwich panels vary according to the material of the outer ball:

Fittings for plastic panels

For the installation of PVC lining, a special plastic profile for PVC panels is used - a decorative molding. The standard length of the profile is 6 m.

• cob (starter);
• universal;
• internal and external kut;
• happy;
• cornice (steel plinth);
• F-like end.

When choosing a molding, pay attention to two main parameters:

• grooves - are picked up from the improvement of the comrades of the frozen PVC panel; for example, pіd pvc-panel of the curtain 10 mm
• Zabarvlennya - call for the profile of the same color as the panel-PVC, but for some different color options, you can buy a one-color molding, close behind the color to the main material.

How to choose yak_sn_ PVC panels

When choosing plastic panels, you can focus on the variability of the material, even if it's more likely to be chimalo. However, in order not to get fooled and not overpay for a low-quality product, it is necessary to know the key points that determine the quality of the plastic lining:

Technology of processing with plastic panels

For vikonannya, it is necessary to need such tools and materials:

• screwdriver;
• perforator;
• hacksaw;
• scissors;
• roulette and budіvelny rіven;
• olive, kosinets;
• wooden laths for grating or metal profiles;
• clerical low.

Renovation with plastic can be done by decalcom methods. Select the method of facing to lie down in the vіd vіvnya vologostі vіdіshchennya i vіd surfіnі.

The most simple option - frameless sheathing - vinyl panels are mounted directly to the walls or steel. This method is admissible for stosuvannya only in dry areas, yakshcho p_dstava v_dnosno r_vna. Fixing elements - special glue or rare flowers.

Adhesive sumish is applied with a notched trowel on the wall. The panels are sequentially fixed with glue, sticking together.

Important! With the frameless method of facing, it is impossible to install vrіznі lamps.

For processing the application of elevated moisture or uneven surfaces, it is necessary to install gratings in front. The framework from a tree is suitable for dry rooms. If the wooden armor is mounted in a high water area, then the clothes need to be processed by a special moisture warehouse.

Wooden slats at the vertical position are fixed along the perimeter of the application with a crop of 40 cm.

The installation of a metal frame is similar to the installation of a plasterboard structure, but without transverse profiles. CD is hung across the PVC panels, and UD is attached along the perimeter. For the production of great applications, it is recommended to vicorate kleimeri. The installation of lamellas is fixed individually according to the place of installation.

Masking of the sticking joints is done with a foam plinth or with an L-start. Attachment of the rest of the model is sometimes used for additional glue.

PVC plastic panels: interior photo

Renovation of the kitchen with plastic with a baby at the pivstina. Inter'єr vikonaniya in black and white tones from the addition of red accents.

PVC plastic panels for bathrooms.

Wall cladding with decorative vinyl siding.

Yaskravі kvіtkovі motives in obrobtsі stіn. Inter'єr before the rest of the PVC panels.

Zastosuvannya plastic lining for sheathing walls and steles on the balcony.

PVC is a beautiful, yakіsny and cheap material, made from polyvinyl chloride. Vykoristovuyutsya stench for the dressing of walls and stel. Standard sizes of PVC panels can be made on a width of 24 cm, a length of 2.7-3 m. A wide range of decorative plastic types and suitable leather elements can be used independently to fit different design ideas. serve as an alternative to such everyday materials: porcelain stoneware, ceramic tiles, piece stone. Vibirayuchi їх, next to the nobility, yakі є є raznovidi tsgo ozdobluvalnogo pokrittya.

Variety of PVC panels for recognition

For recognition, PVC panels are divided into two categories:

• walls;
• stele.

The walls of the plastic lamellas can be soft, they can be the density of vіdminnіst in a vase in pіvnyannі zі steli vrobami. These models are not interchangeable, because between them there is a difference in size and degree of mentality. Vikoristovuvaty їh best for recognition. Rosemary may be as follows: length 2.5 to 6 m, width 25-30 cm, thickness 6-10 mm.

They can be matte, glossy or varnished. Cі plastikovі virobi during operation are not subject to mechanical inflows, the stench is thin and not like mіtsnі. Rozmіri dovzhina vіd 6 to 10 m, width 25-30 cm, thickness 4-5 mm.

When vikoristannyh plastic virobiv in the quality of the building material, there is no need for a preliminary preparation of the walls or the steel (removal, removal of old trellises, farby, plaster). For the installation of panels, no special tools are needed. Krym tsgogo, virobi secure sound and heat insulation, mask electrical cables. Panels do not require special attention. Їx can be wiped with a miyuchy zasob or with a servlet. Poshkodzhenі virobi is easy and just replaced.

See the panels behind the closing method

According to the type of charge, the stench is subdivided into:

Seamless panels made of plastic are most commonly vicorated for trimming insoles. Restore the stench groove by groove. With their correct laying, the surface will come out even, smooth, with an unremarkable stitching seam. The following factors are added to the quality of the building: the power of plastic, the need for saving rules, the destruction of which can lead to deformation of the panels. Therefore, be respectful of the choice of material.

The most widened are rectangular embossed models, which, when laid, make a lining on the surface of the clapboard. Tsі panels cost more expensive, may have a high level of hardness and better performance characteristics. They are good at lining wooden walls and other problematic surfaces.

Panels with rustication look like seamless beads, only on the ends there is a decorative burrow - chamfer. Zastosovuyutsya for the processing of various applications.

Expansion of plastic panels

According to the dimensions, this everyday material is divided into three standard varieties:

• lining;

rectangular or square tiles;

sheet panels.

The photo is presented below), as they are called clapboards, making a length of 3 m, a width of 10 cm or 12.5 cm from a hanging profile. Option "european", which has a wide lock, more requests, lower "polka" with a narrow lock.

PVC panels, the dimensions of which are 260, 270 and 300 div, and the width is 15-50 div, there are no seams when joining the lining.

Rectangular or square tiles for wall decoration are very popular. Їx dimensions - from 30x30 to 100x100 cm. Stinks are light and easy to install.

PVC panels, available in standard width 80-203 cm, width 150 to 405 cm, thickness 0.1-3 cm. The top ball can be smooth and impact resistant.

Plastic sandwich panels

Today, plastic sandwich panels are the most popular building materials. Vykoristovuyutsya for the design of window sills, the installation of partitions at the premises. This material is of a high class and miraculous quality. Obroblenі him pіschennya mayut elegant, respectable looking.

We produce standard PVC sandwich panels, the dimensions of which are 3000x1500 mm, 3000x1150 mm, 3000x900 mm, thickness - 10 mm, 24 mm and 32 mm. The parameters of the outer overlays are from 1 to 2.40 mm.

Advantages and dominance of plastic panels

PVC panels have a lot of positive qualities, which is why the stench of the flooring is popular:

• Universality. PVC panels, which are different in size, can be installed vertically, horizontally under a small shoulder.
• Aesthetics. With the right choice of color, you can create cycavia, a pleasant interior.
• Ecology. PVC panels do not see toxic speech, they are safe for healthy people.
• Stability. The Danish material is light and moisture resistant. And also stand up to the splash on the new aggressive factors of dovkill.
• Mindfulness. Panels can show mechanical strength, which is even more important with their light vase.
• Durability. The operational term for plastic molds becomes 20 years.
• Lightness at sight. The panels should be wiped with a damp cloth or servette.
• Ease of installation. Warehouse work can be carried out independently without the knowledge of specialists and special tools.
• PVC panels can provide heat and sound insulation.

How to independently determine the thickness of the panels

To determine the strength of the plastic panel to be purchased, follow:

• Look around virib, beastly respect on yoga surface. The slats can be ideally smooth, even, without shaking. Unacceptable enlightenment from the outer front side of the ribs of hardness, which is in the middle of the forehead. May be the meaning of the tovshchina of the outer walls of the panels. The front side is especially appreciated.
• Pick up a sprat of lamellas, with which there is respect for the seam and ease of stitching. High-yield varieties are practically chosen without traces and without special suspense.
• Review the material for mentality. For whom, by force, squeeze the panel. Vaughn is not guilty of cracking or being severely deformed.
• Perevirity plastic on zgin. The tuft needs to be bent 4-5 times. If the material is not cracked and not broken, then it will be vibrated and serve for a long time.

Scope of molding plastic panels

PVC panels are ecologically clean building material. Vіn widely zastosovuєtsya for the dressing of walls and stel at the dwelling booths. Even more often plastic panels can be found near offices, shops, restaurants. Vykoristovuyutsya stench for lining the walls of sports spores, medical installations, schools.

Also, you know, how to expand PVC panels, how to change them, how to gain power, how to choose the right way, how to choose the right way, how to fill the area, you can buy the material and proceed to self-improvement of the wall at the booth.

Lining with pvc panels is one of the most preferred in comparison with other building materials. Pvc panels for wall cladding can vary in size and you can easily select the material to select the smallest number of inputs.
In this article, we can look at how the robot works and how it works correctly. A video will be presented showing you how to walk through the entire installation process.

Oblitsyuvannya may be low, yakі privablyuyut spozhivacha. Ale є th nedolіki, yakі can zmusit you change your decision to the savagery of other material.

Advantages of the material

The pvc facing panel has a number of its own advantages, which are significant at a time:

• You do not need to carry large expenses for the preparation of the base area. To complete the cosmetic repair of the base surface;
• The pvc facing panel is attached to the frame and you can install additional insulation and save on energy sources;
• You can also cover the bathroom with pvc panels for that other application. The stench miraculously endure increased moisture and temperature changes;
• Under the hour of vikonannya robit you can pick up all communications;
• Tse dovgovіchna konstruktsіya, scho to serve to finish long;
• The price of the material is not high and її you can afford a practical leather person.

Nedoliki

Bathtub cladding with pvc panels may and a number of its shortcomings, for which the following are called:

• PVC panels fight on the frame, but it's not enough. Even though you don’t have a large occupancy, it has promised to change by at least five cm;
• If you have a non-salted application and you want to work on the dacha, then the next nobility, at low temperatures, this material becomes cold.

Uvaga: When choosing a material, varto, we will override it with other brands. No one knows Chinese cheap brewers for ever getting the technology of brewing.
That's why you can see shkidlivy smells when you move the water.

Selectable PVC panels

In order for the robot to go quickly and bula vikonana yakіsno, you need to choose the right panel.
Tse fight like this:

• For the cob, rob the surface. The panel may be different.
  To that varto tse designate in advance. That way you will have fewer entries. Those are the same in width;
• At the store, you need to evaluate the geometric shape of the details. Yaksna panels may have a regular geometric shape;
• We look at the place of crippling. The edge of the zhorstkost can be mіtsnіshim, aligned with the main facial part;
• Now zastosovuєmo panels on the stick. We insert at the groove. It is her fault to enter, and not to chip;
• After that, it is pressed with fingers on the surface. We have a dent in our eyes;
• Now we are taking and sprat once again we are cutting the edge at different directions. Yakіsna products do not crack and do not break. Vaughn just turn to the front position. And why not lose the tracks.

Renovation of the bathroom with PVC panels

Pvc panels are vibrated according to the rules and dotrimanny necessary technology. Dali timetsya itself about tse.

Surface preparation and marking

Panels pvc cladding walls fight on the frame, which is the next step on the properly prepared surface. The curvature of the plane does not sway us, but it is necessary to carry out the steps of the work, first to lower the reinforcement.
Father:

• Robimo looking around the area, we know that there is a lot of cover. If you need to molt, otherwise you can’t for any reason, then you need to prostukat the surface and you are afraid of removing the plaster, you need to clean it up. Tse rush for the help of a hammer, that chisel;
• After that, we need to apply a ball of antiseptic on the surface, we will have a free sale. Vikonuemo work for the help of a brush or a spray gun;

Uvaga: It is necessary to swear obov'yazkovo. Aje bath kіmnata, tse p_dvischena vologіst i akscho fungus more appear after vikonannya oblitsyuvannya, then the problem will be solved and not so easy. To that zrobіt tse navіt for the sake of prevention.

• Check on the outside hanging and the next time we need to apply a ball of primer. Tse to fight also for the help of a brush or a spray gun;
• The lining of the bath with pvc panels is carried out on a frame, which should be fixed in one surface. For whom we are making a mark. Postavtesya to tsgogo z vidpovidalnistyu. In case of an incorrect vikonann, it is possible to repeat the frame and the geometric shape may be incorrect;

Uvaga: When applying rosettes, immediately wrap the insulation ball. Remember, you are not guilty of being deformed by the panels, otherwise you are wasting your authority. It is necessary to transfer the gap into a couple of divs. To provide and necessary ventilation.

• We put a note on the wall from the consumption of rosemary. Now we take oats and transfer them to the lower part of the surface. Those same bazhaєmo and on the protilezhnіy wall;
• Now we need a back line. For whom zastosovuєmo simple kapron thread, and we just vіdbivaєmo rozmіr. Now we can install the frame.

Robimo carcass

Lining the walls of the bathrooms with pvc panels, work with your own hands and this instruction will help you to work correctly. The frame can be made from a metal profile or from a wooden beam.
Acceptable first and other option. Only in the first turn, the construction will be more superficial and long-term.

Respect: as you work a frame made of wood, then you should bring it to the place of vedenniy robіt zazdalegіd and work it completely with antiseptics, it is important to continue the term of service to the virob.

Father:

• Rіzhemo slats at the required rosemіr and krіpimo around the perimeter. For whom the perforator is zastosovuєmo, for the help of some kind of need, open it.
  P_slya tsgogo robimo zadnannya for help dowels. Do not varto for that zastosovuvaty dowels from sets, the stench will not give superficiality and hardness of fastening.
  Nadі pridbati okremo plastic і up to a new self-tapping screw with a diameter larger than the lintel of the opening by a couple of mm. The very same day will be zhorst and nadine;
• Now we need to fasten the cross rails. І їх it is required to spread in one plane behind the height.
  For this varto, stretch the hair along the diagonals of the frame binding. You will need to adjust them according to the height of the installation itself;
• Rіzhemo timber and krіpimo so, as described above;

Uvaga: Do not robit fasten the planks in the back. Increase the clearance of n'yat mm. Vіn vryatuє you vіd nepriemnosti pіd hour expansion material.
І correctly open up the walls between the stacks. Here you need to remember that the panels cannot hang from the hanging position, but can only hang on the frame rails.

• Robimo fastening of cross bars to the frame;
• Now we need to apply a ball of waterproofing to the area. It is possible to work up to the installation of the frame.
  But then it will not be so easy to close the canvas. After the installation of the frame, the material should be pored into the required size and fixed for the help of a stapler;

Uvaga: Remember that waterproofing is not placed near the stick. An overlap of 10 cm is required. When fastened to the rails in front, the material needs to be turned a couple of cm. Note that the fabric did not overlap and lay flat.

• After application to the ball of waterproofing, it is possible to fix the reinforcement of the insulation. Yogo z'єdnannya to be carried out for the help of budіvelnyh fungi, as if they were to be installed for the help of the opening with a perforator. Z'ednannya to fight for five points.

Robimo divorced

Lining the walls with pvc bathroom panels is carried out after the installation of the wiring, so in that case you have sockets in the bathroom or you want to light up the lighting of the walls. It is also possible to make a lightening for a mirror.
Father:

• The order is appointed with the connection time. Here you need to install a box for breeding.
  So just as you need energy-saving lighting, it is also necessary to install a step-down transformer here. Until which month can you have free access, you need it for a breakage;
• Now come droti. All z'ednannya shy for the help of terminals.
  The very stink of z'ednannya nadіynim. Not a trace of twisting when fastening twisting. The stench is simply not safe for supremacy, even if the middle of the bath is in the middle;
• Mіtsniy provіd until the month of installation. Robimo issuing the cable of the required supply and obrazaemo.

Panel installation

PVC panels cladding are attached to the frame, with which the following rules must be met:

• Installation rozpochinaetsya s kuta primіschennya. The first thing to be done is to install the starting line.
  After that, the installation of the first panel is consummated. Wine is the most important.
  Adzhe on nіy vzhe vzhe vykonuvatimetsya oblitsyuvannya area. Її it is required to cripple for an additional scheme, which, in addition, signifies the verticality of roztashuvannya;
• Along the edge, there is a fence for additional screws;
• Another panel is inserted into the groove in the front and then it is also fixed behind additional screws;

Uvaga: Don't try to shackle to the stele of that pidlog. When expanding the material, the panel is more likely to warp.

• You will need to produce material. For this next hack, cut a hacksaw with a broken tooth. When the great material is stagnant, tear and eat;
• If you need to open an opening for an outlet or a lamp, then you need to work like this. On the back, the panel is reconciled and the point of opening the door is marked.
  I put it on a level and hard surface and openly fight for an additional drill with a crown. Yaku sled pridbati zazdalegіd that correctly pіdіbrati rosemіr. The next panel is attached to the frame;

• The rest of the panel, which is close to the top. Її tezh varto add and from two sides mark the points of cut.
  If so, we will cut it for the dovzhina and krіpimo. For example, a final bar is set.
• We complete the lining with the installation of a stele plinth, which is not equal to the installation and transfer clearance.

As you can see, the robot is not so foldable, especially if there is an instruction. All to fight with my own hands. Naygolovnіshe at whom food does not hurry up and correctly robit the mark.

Modern life and building materials make it possible to shorten the period of repair in the future with the help of technologies, which are victorious for 15-20 years. Ease of installation and availability of prices are the key characteristics of plastic panels, which can be repaired today on the skin. The wall material produced with polyvinylchloride is produced by vibrators with a wide range of colors, different textures and sizes. The most popular among repair companies is the addition of plastic panels to the beds, walls, and the place of high-pitched koristuvannya with high human traffic.

Arguments on the crustiness of the wrapping with PVC plastic panels

The main advantage of the renovation with wall panels is the price. And the order of іz tsim with an unparalleled plus to repair is based on іnshі perevagi vnaslidok vokoristannya given material:

• ease of purification from any kind of zabrudnen;
• vologostіykіst, unacceptable to pompousness;
• during the day of deformation due to constant temperature drops;
• the possibility of strengthening on the uneven walls and the stele;
• ecological safety of panels for the understanding of the rules of їхної exploitation;
• simplicity of cut;
• small vaga with a significant mіtsnostі.

Be it surface (stele, walls, thin partitions), sheathed with plastic panels, serve for more than a decade. With this, the first commercial appearance of the sheathing is not used with rocks.

Choosing to repair a PVC panel, the master is guilty of knowing about these weak sides:

• the surface of the spill is ready in front of the mechanical action - to strike a slight blow from the building, to leave a dent on the wall and deform the equal ball of the material;
• the plastic corridor behind the minds is more likely to be seen in the middle of the shkidli speech. To reduce the risk of atmospheric pollution, the premises with high fire weather are not treated with PVC.

The nuances of preparing the basis for processing

Renovation of walls with PVC panels does not depend on preparatory procedures to build the foundation. Be it a wall or a stele, it is the base for fixing the grating, on top of which the material is mounted. The panels are laid on a beam or a metal frame according to the principle of covering work, if the lamellas are okremі or the leaves are installed on the crucible system according to the thickness.

Varto respect that the processing of PVC panels is carried out absolutely on a be-yak basis:

• tselyana wall;
• concrete;
• stone surface;
• natural tree ta in.

The main benefit during the repair is the base surface that can affect the installation of plastic panels.

Prior to preparation, it is possible to see the base coat with antifungal drugs to protect the stele or the wall from the frontal rubdown. The wall material from the tree is processed with flame retardants - preparations that reduce the risk of borrowing.

Rules for choosing material for grating

Competently ozdoblennya stіn PVC panels zdіysnyuєtsya on reshetuvannya, scho mount on pіdstavі. Material can be: wooden beam, metal or PVC profile. You can choose a syrovina for resolving by specifying a few specific factors:

• rіven vologostі at priіschenі;
• equivalence of the base;
• the successes of the deputy.

Molded with panels, the flat in the process of repair will require a bagatorase control for the additional help of the vimiruval tool - it won't help fixing the uneven walls or the wind on the stele.

Competent installation

PVC panels require professional installation, even if the master is responsible for knowing the processing technology right down to the smallest details. Wall and stele repair signify an aesthetic appearance of the place - the guest falls into the eye of linear design in the first place. Fakhіvtsі company "RemontBud" implemented more than a dozen projects, deviated from plastic panels - the price of wall materials without intermediary lie down in the coming warehouse cooperative:

• Factory supply of PVC parts;
• panel texture;
• folding work;
• terms of vikonannya zamovlennya;
• sheathing material.

All prices for the services of professional installers are reasonable, which allows you to win your work on small private houses outside the area. Wall panels need to be selected, focusing on the open style of space, which is being repaired - improvements can be harmonized with interior items and the color palette of other rooms or cabinets.

Please enable JavaScript to view the

More than a dozen years ago, the word polyvinyl chloride called out in the minds of people pictures of terrible chemical plants that produce superbly dangerous products for healthy people. A lot of rock was in need of promises to break stereotypes, and even today we boldly tell about pvc wall panels.

In these articles, we will talk not only about those, how to correctly lay the walls of pvc plates, but also, how to choose them correctly. It's a pity, the glory of shkidlivy, chemical material stuck behind pvc nevipadkovo. The reason for this is the unscrupulous pickers, who, in all possible ways, try to make the picking cheaper, including new, safer materials and replacing them with shkidlivy, but cheap ones.

As a result of such machinations, the plant produces pvc slabs for stingy walls. The stench vibrates with unpleasant unpleasant odors, blooms under ultraviolet light, and melts at a slight increase in temperature.

Fighting such unscrupulous tricks, which put mittevy profits as the basis, regardless of those that their products can make you healthy, the head of ecologists and high-ranking state bodies, and we with you, ordinary people, don’t need to make a plan to drink, for such a counterfeit.

The smut rule is not to hurry with the choice, it’s better to spend a year in the store, then suffer from inaccurate materials and filthy repairs.

As a sprinkling of joys, vicarious yak, you can, with great frequency, select yakіsnі and nadіynі pvc panels on the wall:

• Quality certificates. Always ask the seller's supporting documents. This is your legal right, and you cannot be advised. On the right, in the fact that there are more unsummoned virobniks, you can’t help to add certificates of goodness, while you and I don’t know anything about the herd, and so buy it.
• Smell. The main indicator of low-density pvc panels. Don't worry about pereviryat panels on the smell, vіd tsogo lie down as your repair. The superior material cannot be broadened by the unacceptable “amber”, the shards of it are more likely due to the destruction of the technology of virobnitsia.
• Mechanical power. Here it is possible to avoid the factor of maximum evil, which can be seen in plastic. It can be shown only in laboratory minds, but in a store you can just try to lightly bend the panel into an arc until you feel the tension. The smaller the radius of the wigin is larger, the tim is the lower material.
• Krykhkist. Non-stained plastic is easy to break, and with such material during installation, you can be blamed for impersonal difficulties. Obviously, you won’t be allowed to lamati panels in the store, but you can try bending the edge of the mounting tongue. At the yakіsnih panels, the veins are easily bent, and after that, like yoga was let in, they turn in the cob position.

Obviously, all these methods are far from laboratory diagnostics, but then with the help of them it is possible to identify the most advanced materials.

Please! Try to choose a panel maker from your choice. Great companies value their reputation, and do not allow counterfeit products for the sake of copy retail. Obviously, the price of a given brand will be higher, then there is an additional guarantee of quality.

Later, with the criteria for selection, we were selected, but we are deprived of food, which is why this material is so popular. Let's try on a new perspective.

Positive quality of PVC panels

Tse:

• The speed of the repair. PVC panels for walls can be expanded from narrow planks with a width of only 7 centimeters to majestic slabs with a width of more than a meter. Tse allows not only to slightly distort the large areas of the walls, but also gives the ability to stain the material with maximum accuracy.
• Stіykіst to natural vplivіv. For example, you can vikoristovuvat pvc panels for zovnіshnoї stіni, no snow, no clear sun do not leave traces on them. The only thing that can happen is that there is no such thing as mechanical failure, but there is no such insurance.
• Bezpeka. Vicorist pvc panels for walls in the middle of the room, you can not boast about your health. Modern polyvinyl chloride does not avenge high formaldehyde, and can be considered as a building material for a child's room.
• Ease of installation. Laying pvc slabs on the wall is available to navit tim, who earlier did not try to repair the booth with their own hands. Here everything is borderline simple and understandable, enough to marvel at the photo, or to watch the video in this article, which shows the report instruction with the work and with this material.
• Resistant to water. This factor is especially relevant for vipadkіv, if the repair is carried out in the premises with an aggressive middle. PVC panels can not only be wiped with a damp ganchirka, but also with a great amount of water and wind from the stagnation of miyuchy zasobiv.
• Aesthetically pleasing. Walls from pvc panels can look even more attractive, especially to show imagination and design cunning. Combination options are too rich, and everything is less than your special preferences.

As you can see, there are enough positive vibes, and it's up to pvc panels to be such a popular and demanding material. In these articles, we will not report how to install pvc sheet panels for walls, our theme is interior, but can we write that material in all applications? axis about tse mi th let's talk further.

PVC in the interior of living rooms

Zhitlovy kіmnatami vvazhayut tі, de householders spend most of their free time. Vitalnya, bedroom, child - these are all living quarters, in which pvc panels can be installed.

Here, the Idalnem Podnnanni is able to bring the Laminat on the PVC pvc on the stіni, the head of the designer shows fantasy, the panel of the Dazhe RIZNOMANITI, I can be stirred by the nyshitrodrichi decor. part.

Cream panels, pvc tiles can be painted on the walls, stench can be square or rectangular shape, and even more room for imagination. On the surface of the panels, the tiles are not picked up by the groove-groove technology, but are glued to the base with special glue.

Here it is important to correctly go to the preparation of the wall, it is the fault of being perfectly equal and without water. Seemingly simpler, in front of him, how to cover pvc walls, they need to be plastered and plastered. The process, obviously, is foldable and laborious, but take a word, that’s it.

child

The main advantage of using pvc panels in children is the fact that all children are little artists, and the most important canvas for their creativity is often the walls.

Now don't worry about it, PVC can be easily wiped off with a simple slate olefin and a permanent marker. Golovne, tse vikoristovuvaty in this special pvc panel for the walls in the middle of the application, їх vіdminnіst іn the fact that stinks can creep without vikoristannja sretuvannya, without being in the middle on the wall, but add to them the superstitiousness.

Bedroom

The axis de definitely does not have any borders and decorations. All to lay down only in the case of the masters of the kіmnati and їх perevag. Experiment, combine, find new solutions. The versatility of PVC panels allows for all kinds of things.

PVC in non-living areas

The selection of pvc plates, sheets and panels for non-residential premises is the most relevant. As a rule, here there are no advances to aesthetic prioblivost, and the very first characteristics appear in the first place, such as durability to different vanity, simplicity and durability.

On the cob of our stats, we already overhauled all the positive aspects of materials based on PVC, and, as you remember, the stench seems to be a must-have. A standard booth or apartment has non-residential premises, as a rule, more, lower residential ones, and repairs are traditionally carried out in them more often, shards of promotion of innovation on the surface are usually worn out to restore materials.

With PVC there are no such problems, you can easily endure regular cleaning, and in case of some mechanical problems, you will only have to replace one or a few segments of the work, with which the entire repair will be left in total safety.

Sanvouzol

І for completion

Obviously, not everything that can be told about pvc and other materials, but for a narrow frame of one article, such a large amount of information simply cannot be accommodated.

Whether it be for a young man, his small glance, he gives you an understanding, how practical and practical material is. having completed the wall with panels, you can forget about further repairs on a rich rock, and if it is not high, it will please you with the greatest hamanets.