How to scorch the booths with electricity. Singing the booth with electricity: possible options

⁰

Not so long ago, the burning of a private booth with electricity was considered more expensive pleasures: fittings for heating effectively reduced the amount of electricity, the price of a yak changed only in a few days. However, technical progress does not stand on the spot, and new additions are brought to the market, buildings will effectively heat the premises for the least possible electric power.

At the most important large fluctuations, scorched by gas, it’s smart to get cheaper, lower electricity, don’t forget about it settlements in the country is not yet gasified through the difficulties in laying the gas pipeline. Previously, the only alternative to gas was only firewood and wood, but with the emergence of economical heating appliances, electricians are increasingly replacing traditional firewood.

Options for heating the booth for additional electrics

Rozmіrkovuchi about those, chi varto heat houses for additional electrics, in the first place, we will follow propositions on the market, from which it will be necessary to choose the most optimal one. It is best to choose from the two largest available options:

Straight scorched, if heating devices are installed in the skin application. Data attach to the building, either autonomously or at the warehouse single system, Cheruvannya for greater transparency in coring can be entrusted to electronics. The advantage of this option is the minimum cost for installation: everything that is needed to grow - just install heating and powering these types of sockets.
Scorching a booth for additional heat. This option guesses the scorching system gas boiler Tilki zam_st natural gas here vikoristovuetsya electric energy. The principle of dii is the same - heat-carrying, the role of which in more vipadkіv vikonuє water, is heated up to required temperature boiler, and the stars are supplied to the heat sources - batteries or heat supplies.

Whichever one of the best methods is better, it is necessary to virishuvate on the skin with a creamy look. Vykoristannya obіgrіvachіv vіgіdnіshe thіѕ mіnіmalnі mаnіlnі vitrati іn montіnі robots, the same іkіn thе waterman electrical scorching the advantage of having a greater thermal inertness of the country. Wtim, you can combine these options.

With the first option, everything was more or less understood, but on the other, I wanted to be more detailed. The principle of yoga robots, as they said, is to make it simple - water heated by an electric boiler circulates along the scorching circuit. Water, like a heat-carrier, is stagnant at the houses with a permanent residence of people, so that the temperature does not drop to the freezing point of this place. In budinkas with periodic residences, docilnishe vikoristovuvat the native land, which does not freeze at low temperatures. So you will get rid of the need to scorch the place during your stay, and you will not worry about the system in a cold place, then you can heat up the living room. Do not forget also about the different timers - the room will heat up before your arrival without any additional power supply.

When choosing a divorce, lead the next call on the day of the moment. Zokrema, one-pipe type of breeding - the least expensive and the simplest option. Mustache radiators heat up sequentially, the stench heats up unevenly.

Larger glass and folding option - two-pipe. Here the radiators are mounted in parallel one to one. By installing thermostatic valves or locking fittings at the entrance of the skin unit, you will deprive the possibility of temperature regulation on the authority's control for the skin room.

Another option is a collector wiring, if the skin radiator has an okremy pipeline, which is supplied and driven. At collector scheme it is necessary to install additional equipment on the scorching accessories, the skin temperature of the radiators can be adjusted without intermediary on the collector.

Installing the system, you will have to choose and blow, more precisely, the materials from which the stench is prepared. At this hour, pipes are presented on the market:

polymers;
midi;
steel.

Leather material has its advantages and disadvantages, but the most extended option is the first option.

It will also be necessary to choose between radiators, choosing one of the options scorching accessories. Zokrema, you can choose steel, chavun or aluminum radiators, but for the house it’s not bad to add expensive bimetal scorching attachments. Vtіm, choosing radiators for your system, it's best to turn around for help to fakhіvtsіv, yakі zmozhut prorahuvat the best option for your booth.

Advantages and shortcomings

Well, if you talk about the trouble of heating the living room for the help of electricity, then you can see a few moments:

notably low cobs of windscreen through the daily need to design a gasket to the core of the gas pipe and flue;
longevity;
practically noiseless operation, the presence of shkіdlivih viparіv chi kakihos odors;
ease of operation - the components of the daily elements that normally go out of order, such as sensors or heat exchangers, do not need to carry out periodic maintenance work;
low rіven pozhezhnoї nebezpeka through vіdsutnіst vіdkritoy half-light;
the ability to set the temperature you need at the reception;
high rіven heat transfer;
low variability of electric boilers and minimal windage during installation of the electric heating system.

In addition, it is possible to benefit from the heating of the life of electric energy, without being afraid for the withdrawal of permits from various authorities, for the implementation of the option from the installation of heating equipment, which works on natural gas.

Vtim, there are also some shortcomings here. Before them, we can see a significant amount of electrical energy. In the middle on the scorched area 10 square meters it is necessary to spend 1 kilowatt per year of electricity. It doesn’t matter if it’s a square, for example, in 100 square meters only for scorching, there will be 10 kilowatts of stained glass for a year. Therefore, looking at achieving high prices for electrical energy, such an option at first glance can be costly.

But here it’s not a good idea to forget about the presence of rich-tariff lichniks, as if to give you the opportunity to earn with lower rates at night. In addition, on the market today and nightly accumulating heat accumulators, you can spend a lot of time on electricity when you heat a house with electricity in a kilka time.

The most common for heating applications are the most efficient and economical systems that function in the living room. Do not leave a place in the middle of the day when you see a scorched booth with electricity, which will be stagnant in the distribution of victories of one energy source.

Among these technologies, two main direct lines can be seen, these are boilers that are powered by an electric jet and flexible panel attachments.

See the electric fire

Kotli

For the first time, we marvel at how to burn the houses with electricity, vicoristing the TENO cauldron, or rather, we will figure out in what way the building can be.
The unit is filled with heat transfer, a TEN is installed in the yak for heating. A scorching water circuit is connected to the tank, which is provided with a Primus circulation pump.
The TEN itself is a steel or copper tube, reminiscent of serving as quartz sand, and wine as a dielectric.
A spiral is pressed at the pipe, it is allowed to heat up to a temperature of 1200⁰C to 1500⁰C, and then through the top of the valve the CCD decreases, and the surface of the tube is heated only up to 800⁰C, giving off the energy of water.

It is easy to finish the addition of the TEN boiler and at the time of the exit from the fret of the spiral, it is even easier to work the change, picking up a new heating configuration and tightness. For dotrimannya zakhodіv zakhodіv іnstruktsija transferring vikoristannya package zapobіzhnіv vіd 16A to 20А on vapadok, so the spiral is closed on the heat-carrying fluid, in the capacity of which water, antifreeze and antifreeze can vikoristovuvatysya.
The regulation of tension is controlled by an additional thermal relay, which turns on the lance at a given temperature of heating the radiator.
One of the obvious serious short-lived boilers of this type can be called high quality through the choice of expensive materials (stainless steel, nichrome) and a small term of exploitation.
So, at the beginning of the day, you have to stop the specialization of the scum, or to win the distilled water from the entire system, through which the price for heating the house rises.

In order to increase the electric scorching of the booth, it is also possible to vicorize the electric heating attachments (EOU), so as to increase the economy and productivity of TEN boilers (KKD EOU to become 98%).
For heating a room of 20m2 with a bed height of no more than 3m, 1 kW of energy is sufficient, which is generated by a heating appliance (for the sake of sufficient insulation, it will be enough).
In the fall, in the form of modifications, electric boilers in the building supply water in huts at a height of up to 24m for the account of її physical authorities, which appear during heating. Such a process can be carried out without freezing due to fluctuations in temperature at the exit and inlet (at the exit the temperature reaches 95⁰C).

The principle of operation of the EOU is simple - heat-carrying, trapping in the middle of the chamber, where the block of electrodes is located, collapsing directly from the anode to the cathode with a frequency of 50 Hz.
Tse means that the rhythm of the kolivan rіdini becomes 50 stitches per second and for every quarter it heats up, moving uphill.
Such attachments are safe, but for quiet vipadkiv, as the electrode is closed to the case, it is grounded. Some people are afraid that water can be struck by an electric jet, that it is in contact with a positive charge, but in fact it is not so.
Guess the boiler from two climbs at student rocks - electric strum pass between positive and negative charges on the path of the smallest support and into the water, which is played, you can freely put your finger down.

TENovі boilers			Electrode boilers
Fitting	Area to be heated (m 2)	Energy consumption (kW/year)	Fitting	Area to be heated (m 2)	Energy consumption (kW/year)
3 kW 1 phase	30	1,5-1,8	3 kW 1 phase	60	0,37-1,0
5 kW 1 phase	50	2,0-2,5	5 kW 1 phase	100	0,9-1,6
9 kW 3 phase	90	3,6-4,2	9 kW 3 phase	180	1,8-3,0
24 kW 3 phase	240	9,5-11	24 kW 3 phase	480	4,5-8,0

Ratio table of tension relief TEN and EOU

Please. To increase the KKD (electrical conductivity) of heat transfer, you can add 30 g per 100 liters of water grub soda.
As the system is folded with aluminum radiators, speed up the ACO-1 septic tank, mixing it in the same proportions.
At the same time, do not beat in the okremo taken contour of the scorched, which is completed with two metals - aluminum and midi. Tse prizvede to the oxidation of the pre-hour exit from the harmony of the deyaky elements.

Appliances for direct burning with electricity

Pіdlogі і nastіnі mаut one unparalleled problem - it's easy to install them with your own hands - just plug them into the socket.
Until then, such an attachment cannot lie in the scorched contour, so you can put it in any handy place, removing the necessary tension.

Possibly, vibrating, as if roiling into a house of electric scorching, see your choice on the system of warm weather. Ale in tsomu vipadku, I know you still happen to choose between electric cable, matami ta (IPO).

If the electric cable and the electric mat can be installed only on the back, like in the photo of the animal, then the IPO is mounted on the wall and on the stele.

ІPO can be covered under some kind of decorative veneer, and if it covers 70% of the area of the room, then it will be the main scorched.

Visnovok

You can also watch a video clip on this topic, but I would like to say that electrics for scorching are beaten in 80% of cases. Navіt yakscho tsya energy is not zadіyana without intermediary on bіgіv, the circulation pumps are ruined.

It’s hard to work, it’s like you don’t have gas, but it’s even more troublesome to heat with firewood. The answer is even simpler: install an electric boiler. It is obvious that it is necessary to build a rozrahunki, put together a plan, purchase required materials that possession.

A single nedolіk singed - tse high price. Then skilki wins:
- simple installation and installation;
- Low compatibility of the installation of the electrical system of burning;
- High security rіven;
- Electric scorching options.

Establish such options for electrical scorching. Directly scorched - without victorious heat transfer. Another option is a centralized scorching system that includes a boiler, radiators and convectors. The third is the electrical heat of the sublog, which can act as the main or additional scorching.

Electric scorching installation steps

For scorching the booth with electricity, it is necessary to protect the features of planning, and scorch the area. On the market of electric power today there are presented a variety of high-quality ones, which may have a great KKD and may have a long term of service. From the existing systems you can see the stele infrared heaters, plіvkovі or kabelnі systems pіdіgrіvu pіdlogi, stіnnі аbo pіdlogі convectors, radiators

Before the work is carried out, from the installation of the electric power, the fault will be less than fahivtsі at this gallery, which may give access to the installation. Installation of the electric boiler warehousing equal surfaces. Attachment can be mounted without distortion. Further, the connection of the unit to a reliable electric power line and the organization of overhead grounding are carried out. At the rest of the stage, connections are made to all elements of the system. After completion of the work, the system must be checked for tightness under pressure.

With an electric heating system, it is not necessary to install a dimochid, but I will install an add-on zahisnogo inclusion- Obov'yazkova. If the boiler is the heart of the scorching system, then it is normal for the robot to lie in the system. Boiler next to pick up for exhaustion. For heating a room of 10 sq. m with a height of more than 3 meters, 1 kW of electricity is consumed. It is also necessary to take heat loss from rozrahunok. When you buy a scorched boiler, it is necessary to add a filter, a circulation pump and an outside valve.