What are plastic panels and what are their adhesives. How to glue the trellis to the plastic

⁰

Before that, how to glue the PVC panels, ridge on the vimogi to the backing material. It’s even more important, shards of those places, in which you plan to vicorate with panels, you just don’t fit, so you won’t be satisfied with the helpers. Until then, if this happens, then you will know great controversies at the link with the help of the material. Otzhe, let's go:

The selected PVC panels have been harrowed in quiet places, where temperature drops reach 20 degrees Celsius.
Even if the temperature indicator of the application, which will be the material of choice, is not higher than 10 degrees with a minus sign, the use of panels is not recommended.
If the building material was in the room, where the temperature was -10 ° C, then for a certain hour it should be placed in the room, the panels should be removed.

As the panels are mounted horizontally, the stick groove is to swing down. To turn off the ingress of water and condensate under the material.
Viroblyayuchi stowage of material, stitch, so that eels and gaps of 5-10 mm were left at the bottom.
To carry out the installation of panels with a small one, start from the left corner and go to the right one. If the material is plain, then the starting side is not important.
Before the hour of cutting the panels behind the rosemaries, cut the saw blade with a fine cut of teeth. You can also beat the grinder with a special stake.

Now, if you know the basic principles of working with the material, you can start picking necessary tool Shchob installation of PVC panels on glue passing without wind, so bimoviti, vіd vіrobnitstva.

We select the tool and purchase the required material

Also, in order to glue the PVC panels, it is necessary to prepare the necessary tools for the robot. Axis eye list:

You need additional help, to cut straight cuts.
You can't do without a wakeful equal.
Stock up on a roll.
For additional help, you will have to cut different cuts on the surface of the panels. In that case, as you are planning to create a non-repeated visor on the surface of the stele or wall.

Please! If you don’t have a lot of drabini, then you can get by with a great stool or a style. Yakshcho, well, you have standard height rooms.

In principle, they got it out of the tools. Now you have to go to the specialty store or to the weekly market. There you need to come:

Without the middle of the PVC panels themselves.

Please! Buy the material of the three with a reserve, so that we don’t spend an hour on the tone!

Kuti internal and external.
Start profiles.
Plinth pіdlogovy that for stele. The footage is stale in the area of your cultivated surface.
Adhesive for panels.

Mustache. Now you can proceed directly to the installation work.

Installation of PVC panels on glue - thin process

Respect! To create a winding, you need the appearance of a perfectly even surface.

As such, it seems to be possible, then it is advisable to look at all the subtleties of the installation:

First, there will be a PVC panel sticker on the bottom, you need to degrease the surface until the material is glued, as well as that part of the panel, on which there will be rozchins, what to glue. To do this, just spread the dishes near the water for washing the dishes and wipe the surfaces with it. Having reached the final stage of hanging, we move on to the offensive stage.
Now it is necessary to appoint a glue warehouse for robots. How can you speak moment mounting, Titanium otherwise, there are beautiful flowers.

Important! Depending on the chosen size, you may need a special glue gun.

Glue applied point method. Vіdstan between dots can change between 30-35 cm. Dalі, respect, vіd'єdnuєte її i let's stand close 1 hvilini. After that, again press the hardening material to the surface. Algorithm for repeating the skin pad.

Among the versatility of building materials, you can see plastic panels, which are called PVC panels. The remainder of the word today is becoming more frequent, to talk about the growing popularity of this product among our spivvitchizniks. Alas, part of us still does not know about the method of processing practically nothing, and the article was called to correct the situation

Such panels are based on the usual polyvinyl chloride. The Danish material can be impersonal, and the products based on it are practically sound. It doesn't matter if you live in Moscow, Veliky Novgorod, or on the furthest frontiers of our country - with great ease, in close proximity to you electric darts. So the axis, the shell is made of PVC. Nareshti, mittens, watering and other hoses, scarfs and a lot of other speeches, with which we stick, even if it’s not a skin day, then often.

When it comes to panels, the stench was especially active in the samples of the 90s. Vtіm, at the same time, their popularity did not disappear, just the vector of vikoristannya zmіstivsya from the living huts, on the edge of the room - a bath, a toilet, as well as on the office premises.

Advantages of plastic panels

Simple installation. Below we will look at the options for gluing these panels in a fallow way on the surface. Prote the process is even simpler and it’s unlikely that you’ll be troubled by people without knowing. The process is also passed through to finish the shvidko;
Polyvinyl chloride is cheap. Obviously, in povnyanni with trellises, it’s not so, but it’s more expensive to buy inexpensive kahelna tiles. So, if you want to carry out the processing as quickly as possible and inexpensively, but save your preferences old look, PVC panel will become an ideal option for this;
A simple look. The material reacts well to being processed with water and miyuchimi zasoba. With it, the presence of static allows you not to attract the saw;
Fire safety. Panels based on PVC are safe and wide enough for the bedroom. The stench lights up very reluctantly, and before that, in a short hour, they simply go out;
Variety of colors and textures. Polymers are good, that they can imitate everything. So, even though your design plan, knowing the plastic panel for yoga instal- lation is not difficult;
Originality. In the remainder of the decade, the interest of sustainability shifted to other building materials, and also, today, plastic panels are seen on the aphids of single-mantle interiors. Until then, their current model range is significantly wider;
Durability. Zavdya that plastic is easily visible more zovnіshnіh vplivіv, such panels can easily serve for 20 years and more.

Nedolіki plastic panels

Not a lot of numbers, like a win, but all the same. So, similar panels quickly use their own color on sun, so polyvinyl chloride is weaker to flare up with a 3-fold influx of ultraviolet changes. Krіm tsyogo, deyaki skarzhatsya on the characteristic smell and blyaklі kolori. Vtіm, these vipadki are all the same one-time and in order to get away from everything, enough to bathe products in places, de vona is guaranteed to mother high quality.

Important! If you want, so that the intake of all panels is equal, it is necessary to bathe them in one batch. Practice shows that sometimes there is a difference in price, and it can be seen after installation.

Vidi PVC panels

Plastic tiles. These elements may sound out of the range of 30 to 100 millimeters. When tsmu z'єdnannya їх vіdbuvaєtsya for the principle of grooves and thorns. Vіdkrivaє dosit nasty design feasibility, so that you can create a mosaic, combining tiles of different colors;
Sheet panels. Ring out plywood, as if it were mothers of different parameters of a modern look. Cling for help flowers or glue. We give special respect to the process of installation of the most popular type of such models. To get their own opportunity for Swedish improvement, and also, that they can be easily driven away;
Reik dials. Fastening is used for additional brackets, which also work for the principle of grooves and shields.

Wimoga do steen

As practical as it may be, in any case of improvement, it is necessary to thoroughly clean the wall and degrease it. Vіd tsogo to lay down those, naskіlki yakіsno and long time to be covered. Krіm tsgogo, the wall is guilty of being as even as possible, so that the plaster is otherwise covered, on which the gluing of the panels will be done, it will be necessary to sand it well.

See adhesive warehouses for plastic panels

Such a glue warehouse allows you to install this material on plaster, vapor and other surfaces. Himself in the best way install these panels on the wall using sealant, which is not expandable. Tsej sposіb privablivy tim, scho zabezpechuє most mіtsnіst z'єdnannya nezalezhno vіd temperature minds. At the same time, the privablіvіst will show also rare colors, as well as mounting glue "Moment". The rest of the economy, to that, having given a small number of points, you can take the greatest amount of profitability.

Important! The application of glue is carried out pointwise in that direction, as the density of the walls is low. If the walls are perfectly equal, then it is best to apply glue around the perimeter and in the central part.

Irrespective of those that the panels can be bent, it is better to glue them on even surfaces. Try to work in such a way that you will be able to enjoy your application, as if they will be covered with similar panels, small 90 degrees;
If a sealant takes part in the glue, then it is necessary to permanently trim the panel until it is completely caught;
Glue on rare flowers, we are guilty of budding about five quills, until the stench becomes a thin consistency, which allows them to be maximally swidko and hopefully agglomerated from the surface;
Don't be afraid to experiment with different colors - a single-layer surface based on PVC boards may not look as effective as a mosaic. In this case, you can not shukati yourself in any kind of dressing, squirming with plastic virobs from other collections.

Installation of plastic panels on grating

As if the wall is filled with the bagat of the shortest and th floor, it can be even more foldable, then the ideal solution would be to mount the panels on the grate. The rest can be like metal, similar to tієї, which vikoristovuєtsya for the installation of drywall sheets, and wood.

Important! When choosing a tree for grating, focus on dry options. At that point, as you will carry out the installation on the old bik boudinka, the tree should be better treated with an antiseptic warehouse before installation.

Keep in mind that the grating can run perpendicular to the panels. When you see it, you will become ideal with the elements of the pivmeter. When mounting this element, it is necessary to use screws or special staples.

It is necessary to start the installation from the kuta, from the rear panel using the groove-groove or groove-groove method. Often the upper or lower parts of such a work, wound without respect on a neat cut, are based on a respectful framing of the dozhini, or through the unevenness of the overlaps, between the ends of the panel and the overlaps themselves, the posters are empty. Stop sounding strongly fall into the vіchі. The ideal solution for this situation would be to choose decorative skirting boards and stele structures of a similar purpose.

Mosaic tiles are one of the most popular materials for kitchens and bathrooms. Adzhe ozdoblennya tsikh prismіschen can not only beauty, but practicality facing, as we serve for more than one season. Ozdoblyuvalnoe pokrittya, vykladene z drіbnih elementіv, zdatne remake whether the surface, acting as a good embellishment to the interior. It is not for nothing that the mosaic in translation has a Latin meaning “dedicated to the Muses”. Ale, when working with tiles, it is important to secure a number of moments, important in the middle of such as gluing a mosaic.

Features of the installation of different types of material

The basis for the preparation of a set of elements, the expansion of which often does not exceed 1x1 cm, can be: slate, ceramics, smalt and polymer materials. The smaller the number of modules, the more accurate it is to get out of the promalovuvannya. The technology for the installation of skin may have its own characteristics. Therefore, the first thing to look at is how to glue the mosaic correctly, to show the particularity of the skin type of the material.

The type of vicorous tile is chosen and the choice of adhesive sum. In addition, the stock is correctly picked up in a rich way, which is why it looks like it is facing.

Virobniki proponuyut kіlka options:

Ceramic modules - on a cement adhesive base with modifying additives. When choosing a warehouse, the type of the item is oriented. For lining on concrete screed otherwise, plaster can be victorious, whether it be a glue sum, recognized for work with ceramics. If you want to transfer adhesive mosaics in bathrooms to old tiles or waterproofing, it is necessary to seal the adhesive storage of the elastic structure.
I will glass the tile - on adhesive polymer sumish with a translucent structure. For this reason, it is allowed to vicorate whether it is a warehouse on a water basis or polyurethane, which may show high water resistance indicators.
Mosaic chips on a paper base are the easiest to stick, vicarious epoxy grout. The advantage of this method is that the seams between the modules after gluing are already half filled.

Technology of laying ceramic mosaic tiles

Ceramic mosaic tile is a classic among building materials. There are no equal ones for decorating equal surfaces and processing swollen elements. It is made up of the same fragments, each of which allows you to create original interior design. Promoted by the virobniks, the colors are even more varied.

For processing, an application with a higher level of moisture content of a piece of ceramic tile is covered with a waterproof glaze. Vaughn to rob the surface of the material is more valuable and promotes its endurance. The cream of traditional glazed tiles is also covered with modules with “special effects”: interspersed with a different color, separation, cracking, imitation of an uneven surface.

The main foldability of a robot with ceramics is that before it, like gluing a mosaic tile in a binding order, it is necessary to prepare an ideally even base. The reason for this is those who, for the obviousness of instilling insignificant differences in the lamb, the basis of the mosaic canvas repeats the shape of the surface.

Subtle nuances, like gluing a mosaic in a video

It is best to lay mosaic chips, which are made in blocks or pieces on a special grid. If necessary, mosaic modules can be easily cut with a utility knife. Okremi elementi - special nippers. But for the vikonnannya tsієї yuvelіrnoї robot it is necessary more patience and the presence of vydpovіdnyh novice.
The work is to be wrapped around the sprat of stages.

Foundation preparation

Before that, like gluing the mosaic on the wall, clean the surface from the excesses of the previously vicarious material. The cracks and drops over 5 mm are to be used for additional rubbing and plastering. The surface of the surface of the adhesive adhering power of the material is coated with a deep penetration primer and covered with a few days until dry.

Wall marking

For visualization, I’ll think about making it easier to work first and glue the mosaic on the wall in front of the wall and sketch on the paper. Nadal, focusing on the new, for the help of a budding equal, mosaic module, and a simple olive to make a mark. It is necessary for the robot to visualize as accurately as possible, shards in the accuracy of the linear stale look of the victorious facing.

Laying mosaics

The work of laying mosaic sheets can be carried out at temperatures, the range of which varies between +5°C to +30°C. Modules start glues from another row. The leather element in front of it is like gluing the mosaic in the kitchen, or in the bathroom, it is applied in front to the surface, overturning the correctness of the little one. Deyaki maistri for whom lay the tiles in rows on the floor.

Gluing modules

The glue warehouse is applied on the place of laying with the help of a notched trowel, the length of the teeth does not exceed 3-4 mm. Sumіsh is evenly stretched over the surface, covering an area of 1 sq.m.

To glue the mosaic tile, the modules are carefully applied to the surface, vibrating between the elements and vibrating, tapping with a gum hammer.

Surface cleaning

Glue, which has penetrated the seam between the chips, must be cleaned up after the help of the sirnik. Having covered the modules with glue, the area is covered with 15-20 quills until the warehouse hardens. After the end of the next hour, from the front side of the modules, they take out the papyrus, beforehand enclosing it with a sponge soaked in water. The paper is taken from the lower right edge, shifting step by step to the rest of the row.

Closing seams

As a mash, it is better to vikoristovuvat two-component sumish, accessories for the same type of tile. It is better to give priority to warehouses, which may have anti-fungal powers. Rosed at the water, apply to the surface with a humic spatula, spreading it horizontally and vertically. After hanging the sumish, the excesses are lifted with a damp sponge, and the surface is polished with a flannel servette.

Shards on the strimky wall under the vlasnoy vaga, the blocks can be destroyed, destroying the integrity of the ornament, it is important at all stages of facing the stitches for hanging between the elements.

How to glue a mosaic video-cervical:

Thin installation of glass and smalt mosaics

The glassy mosaic is made with an alloy of sand and, for its structure, is more ominous than the girsky crystal. Її the surface is absolutely freed from fir, so to rob її impenetrable for driving with a stalk to the influx of microorganisms. Mosaic zі skla miraculously endure the influx of acids and meadows, well vitrimuє temperature drops, and that is ideal for finishing bathrooms.

We will curse the smalt mosaic with a variety of species, at the warehouse of some kind of natural presence, to give the material a singing impression. behind operational characteristics it is similar to its cursed analogue. Ale, at the sight of the piercing elements, there may be an effect of the inner light, the zavdyaks for example, the windows of the sky, with a different lightening, are filled with new lights.

The process of facing the surface with glassy glass, diamond and smalt tiles is also the transfer of footwear to the preparation of work. To create the most decorative effect before it, like gluing a mosaic near the bathroom, it is necessary to degrease and smooth the surface.

The technology of laying glass cladding is little to do with the installation of kachelny modules:

In order to correctly paste the diamond mosaic, it is necessary to prepare that vir_vnyanu basis, it is necessary to resolutely hang and then proceed to the marking.
Apply horizontal and vertical lines on the wall to mark the borders with ornaments, cover the surface with a visible adhesive warehouse and lay mosaic leaves on it.
Vyklavshi all fragments vіzerunka, first glue glass mosaic, pіdganyati elements, neatly destroying them one by one.
Having cut off the main part of the cladding, they strip the surface until it completely hangs. Least of all, the upper ball of paper is taken from the front side, the seams are trimmed with epoxy grout, and the surface is polished with a flannel wedge of fabric.

Uvaga

Be sure that the robot is carefully and quickly picking up the elements of the varto. Rozchin zasikhaє protyag 10-15 quills, after which it is problematic to correct the small parts of the hardened surface.

Please the master, how to correctly glue the mosaic on the screen in the video

Robot with natural stone modules

No less popular is the stone mosaic made from different species: tuff, jasper, onyx, marmur. The natural material is breathtaking with its unique beauty and practicality, and with additional polishing and piecework old building, it reveals a marvelous natural little thing.

Choosing natural materials, care should be taken to create a more porous structure. Look after natural stone it is not recommended to use brushes that wash thick bristles, as well as use for cleaning with abrasive additives, as they can leave scratches on polishing porous surfaces.

The process of laying tiles on sittsі trohi vіdrіznyаєєtsya technology installation of modules from paper lining. If you go about the mosaic grid, it will help you to even the surface of the movement. Before that, how to glue the mosaic on the chintz, it is important to ensure the renovation of the ideally even surface with puttying and plastering.

When gluing mosaics on chintz for a short junction of the panel with the surface, it is recommended to apply a warehouse on the right side of the skin module.
Cloths with tiles are more likely to begin to look like a lighted plot on the surface. As practice shows, the grids of the standard size are brought to fit the size. And it will be more beautiful, as if their parts were roztashuvati in less commemorative places closer to the brim. Zavdyaky to the fact that the elements are far behind fixed on the basis, it is much easier to see the same in between the fragments. The cleaned surfaces and the backing of the seams of the cloths on the fabric are woven by analogy with the modules on the basis of the paper.

How to glue a mosaic on a video

How to glue decorative PVC panels

Through the time of being able to beat for the processing of natural materials, you can always find a good replacement for looking at modern polymers. Polyvinyl chloride has a solid and long-lasting structure, which is famous for its water resistance up to water infusion and temperature cracking.

Modern mosaic panels, made from backed PVC, building successfully take all the small pieces and waters on the surface.

Adhesive panels of PVC mosaics can be used as in the front slopes directly on the wall. First glue the panel of decorative mosaics, it is necessary to clean the surface from oily and mud patches, remove the raw materials beforehand, put down the pits. Fix sheet panels to the surface for additional hot-melt adhesive and rare flowers.

Process in detail, how to glue a decorative PVC mosaic panel in a video

Shards of stench are released without sticks of elements, but we prepare the varto buti before the cracks can appear when PVC sheet panels are glued. Attach these small pieces in the simplest way, filling them with silicone sealant for plastic. Dribni vadi is easily decorated with molding, we will present it for sale in different profiles.

How to glue sheet PVC mosaic panels

At a distance to look after the mosaic, there are no special difficulties. Vaughn is easily seen by the miles of roses, vibrating at the sight of the light and pleasing with the presentable looking old rock.

Plastic panels have become popular building materials for the rest of the hour. Їх wikoristannya allows short strings zrobiti garne ozdoblennya.

The diversity of textures, colors and rozmіrіv add to create a unique design of the place. Їх zastosovuyt for shaping kitchens and balconies, and the durability to moisture to rob plastic panels is simply indispensable for pasting the walls of the bathroom kіmnati.

Knowing what to glue the plastic panels to the wall, allow you to successfully install this decorative material.

Most of the plastic panels are vicorous, to viconate the refurbishment of the bathroom. Tse means that the glue, which is victorious, is to blame for the superstitions to instill in the minds of advanced water.

Choose glue with high adhesion and dry adhesion

Required characteristics for glue:

water resistance. So, as the moisture of a bathroom temple, the glue for gluing can only be vikoristany from water-resistant brands;
high level of adhesion. It is necessary to ensure the best connection with the wall;
resistance to different temperatures and fluctuations. Vykoristannya panels at bathrooms, temperature and moisture domineeringly change, it is possible only at the time of overhead fastening to the surface walls;
manifestation of antibacterial powers. The water and the warm middle is ideal for the reproduction of bacteria and fungus. Through chain glue for wall panels may be antibacterial;
longevity. If you want to glue the panels, you can be like some kind of glue, so that the stench will be superficially fixed on a lot of rocks, you will need an acid warehouse;
shvidka "hoarding". It is necessary that with a stretch of 10 strands after gluing the panel on the wall of the wall, it was already fixed;
daytime high level toxicity and strong odor;
transparency.

Glue, which is suitable for all types of smokers, will be suitable for gluing PVC panels to any place, to be placed near the bathroom, which will increase the temperature on the right. Tse allow obrobtsі zalishatisya have imminent looking old fates.

Options for gluing panels

Explore different options for how to glue plastic panels. The leather master can use glue, but all the same at this gallery there is a wide choice, and how can glue the PVC panels? The following describes the main options:

Emfikol 34012A. This glue is specially designed for fixing to polyvinyl chloride, so it can be used for fixing with plastic.
Kleiberit 636. Made from synthetic resin-based creations, which are environmentally friendly.
Crystal moment. Such glue vikoristovuetsya for gluing on the surface.
Rіdkі tsvyakhi 601 Tse universal glue for vnutr_shnіh robіt.
Rare flowers 901. Glue, which zastosovuєtsya as for the work of the middle place, so call. You can safely attach important materials.
Rіdkі tsvyakhi 915 - sticky speech, as a special vicorist for bathrooms.

table. Main characteristics of various adhesives

Glue	Perevagi	Nedoliki
Emfikol 34012A	Mitsnist, viscosity, stability to temperature differences, color vibrancy.
	The price is available, water resistance, visihannya.
Moment Krystal	High degree of adhesion, longevity, color vibrancy, resistance to moisture and temperature changes.	High price.
Rare flowers 601	Durability.	Visibility of water resistance.
Rare flowers 901	Vologostіykіst, versatility, mіtsnіst, dogovіchnіst.
Rare flowers 915	Resistance to water and elevated temperature (specially for bathrooms).	Opaque, ale may light color.

However, it’s not enough just to choose the right glue, it’s important to know how to glue the plastic panels so that we don’t have to remake everything later.

Technology of fastening of plastic panels

Glue panels on cleaned and primed surfaces

If you want to know that the installation of PVC panels can be folded, actually, following simple instructions, all work can be done with your own hands without framing facsimiles.

Deyakі vvazhayut for the better krіpiti such material on the back of the installation of the frame, which will change the area of \u200b\u200bthe room. How to glue PVC panels? Dali pokrokovo painted with the technology of fastening for additional glue.

Under the hour, it is important to work from gluing the panels to unique material. Also, remember that the smelting is done only after the residual installation. Schob lines, how the material is cut, were as equal as possible, opening and cutting a trace of work only from the front side of the material.

As you can see, the work of gluing plastic panels can be carried out independently. For the cob, it is necessary to use glue, for which the given material is to be fixed. Look at adhesives for PVC panels to marvel at this core video:

For finishing bathrooms with one good optionsє variety of rare flowers 915, which are specially sized for work in areas with promoted vology. Before the installation itself, it is important to perekonatisya in the equal walls, even if it is possible to lay down the old looking place after the installation of the panels.

Bathroom Refurbishment PVC panels secure the wrong result. On a clean, dry surface, the stench is glued with vicarious glue of garnish. Tse sposіb allow for the stosuvannya of a large number of tools, the brud will also be less rich. You lose your mind, like gluing plastic panels in the bathrooms, and ignorantly take up the job. Without zayvih problems, that battle can be zastosovuvat different glue or rare flowers.

PVC installation self-tapping to the frame

Installation of PVC on glue or rare colors

Before the vicons, it is necessary to designate the method of fastening. Panels are mounted with different screws or glued. Leather from the ways of maє vlasnі perevagi. The variant with self-tapping screws looks more foldable, the shards happen to be drilled at the rich opening. It will be possible to dismantle such a fitting easily and quickly, if necessary. A way less far away, shards to speed up the expansion of the destination. Better than yoga, don't bother.

Shvidko that cheap stinks are mounted on glue, the shards of the frame are not broken, they save the bathrooms. The dismantling material will appear more folded. may not be important, then the installation will appear in the distance.

Varto zazdalegіd razozumіti vikonannya algorithm:

Glue is applied in patches on the width of up to 30 cm.
More important than panels, more often it is necessary to apply specks.
After applying adhesive speech, it is necessary to have sprats of quills.
Press the panel against the wall.

The slab is immediately visible and after a few hvilin ochіkuvannya iz zusillyam priskayutsya to the foundation.

Criteria for choosing a warehouse for robots

On the market you can find a lot of names for bathroom glue and toilet. The stench can be strongly vіrіznyatisya for varіsty, characteristics and power. You can know a lot of recommendations of coristuvachs.

Good glue for shoes:

We will see through the aftermath
Tolerate low temperatures, moisture, and aggressive environments
Instantly accumulate that die trivaly hour

Bathroom amenities vidpovidalnoy work Therefore, the adhesive for plastic panels in bathrooms must be chosen with particular respect. Qualifications of fahivtsy are not victorious and do not please universal compositions. It is important to know the warehouse, which is issued for this material.

Choosing a warehouse for work will require respect. You can once again recommend vicoristing only those warehouses, as they are expanded for a specific processing material. Vyrobnik not without reason guarantees the high quality of the items stored in a special warehouse.

Varieties of glue storage of rare flowers

Rіdkі tsvyakhi є warehouse of universal type. Allows you to create mimics and superstructures. To put the plastic on the glue, clean the surface, virivnyanі, obroblyat in the form of flowers and fungi. After the fat loss, it is necessary to dry it.

Apply rare flowers with a mesh on the surface of the wall. Expand them step by step. Then the material is applied to the wall and pressed against it. For robots, it is better to put a roller out of gumi. Seal all sticks and seals with silicone sealant.

You can do something else. It’s impossible to bend the surface of the walls, or, for some reason, you don’t want to, the installation on the lati is vikonuetsya. As a material, metal, wood can be beaten. Varto wood should be protected from water by special warehouses. At the ready, sheathe the grating with plastic panels. More nadіyne zakrіplennya reach zastosuvannyam staples.

Rіdkі tsvyakhi є we specialize with a variety of budіvelny glue. The stench can be victorious in practice. Mounting small PVC panels near the bathtub on them is especially practical and simple. The stench does not mess up the material, they miraculously proved to themselves in internal applications, the robot wins quickly. Navit a novice miraculously vporatisya with detailed robots and victorious rare flowers.

Adhesive method of installation

To install on the glue, unevenness is not to be blamed for revisiting a third of a centimeter. Golovnya does not allow the presence of humpbacks, the indentations are not so scary, the stinks show up all over the place. It is easier to practice, as if to cut the walls of hospitality, otherwise to check great difficulties.

In order to complete the installation, you can use some kind of pleasant method and glue. Food, like sticking panels, is not overly folding. As if the wall was clean and well-cleaned from greasy patches and old trim, you just need to apply glue to the panel and apply it to the wall. The preparation stage takes the most time. How to vikoristovuvaty be-like other sticky warehouses, next to know, how to glue it with a warehouse, protezhit, so that they did not have any traces of organic retailers.

Glue spreads over the surface of the part to be glued. Potim її mіtsno priskayut to the ground and utrimuyut at tsomu position stretching dekіlkoh khvilin. It’s not easy to work, it’s better to make roses. More strong fixation of the material is seen on rare flowers. Tsei warehouse can be attached to the tubes. One of these packages should be stitched on 5 square meters. m Maidan.
Do not apply glue to the edges of the material. If you need to glue the edges, the glue may appear too much, you can enter the name and you can zip the outer look of the work. The panel with applied glue is applied to the wall and fixed in an unbreakable position by no less than 5 strands. There are no problems with the sizing technology. The first panel is more important, but it can be well fixed. It hangs behind the equal and fastens at the bottom and in the mountains with dowels.

If it is necessary to attach the pipes when installing the cladding, then it is possible to combine the installation on the glue and the frame, which is why it is necessary. There will be no special folding options for any option.