Do-it-yourself installation of a ventilation hood at a private booth. Do-it-yourself ventilation installation in the kitchen. Installing a hood at a private booth

A vityazhka near a private booth is an important element of the kitchen space, which allows you to save money from the house fresh and clean it. Obviously, before buying such an accessory, it is necessary to take it into account as much as possible and with the utmost seriousness. In order to make the selection process easier, we would like to tell you about those, for which criteria we follow to choose a winder and look at the design models, which are supposed to be installed in a private booth.

Vityazhka in the kitchen wooden booth otherwise, in a bright future, we allow you to save more and clean and fresh

Five criteria for choosing a drawstring

Ring at a private booth to get ready to finish it often. It’s important to say to yourself correct drawing, so that it can effectively get out of the fads. For which reason to improve a few important aspects, among them, the productivity of the device, yogo rozmіri, noise equal to the hour of work old look.

When choosing an attachment, it is necessary to secure its tightness, dimensions, good appearance and method of fastening

• Criterion 1. Productivity. Under this ostentatious work, it is necessary to clean up the building for a year. Properly loosen necessary tightness the unit is easy to finish - it is necessary to follow the formula.

The greater the acceptance, the greater the may be, the hood in the kitchen at the private booth

Multiply the indicator of the area of ​​your kitchen by її height, multiply the number by 12 (indicator of the norm and capacity), and then multiply by 1.3 again (approximate coefficient of the minimum stock).

• Criterion 2. Rosemary. There is one clear rule when choosing a drawstring - її the dimensions of the hinged buti are not less than the width of the kitchen stove.
• Criterion 3. Rating the noise. In different models, this display can be significantly improved. We recommended choosing a design that would not exceed the noise level of 50-60 decibels.

The models are most comfortable, they are equal to noise, they do not exceed 50-60 decibels.

• Criterion 4. Control mode and lighting. There are no strict criteria here - choose a model that suits your taste and budget.
• Criteria 5. Design. Sob іnter'єr єr єr єr і і і і і і і ї ї ї kuhnі і і іn private booth zalivavsya і аn harmony і think, vyberіt vyberіt vytyazhі model, yak organically fit in new. For example, constructions with metal or glossy inserts miraculously fit into the high-tech interior, dome models with wooden coverings to complement the classic or rural style.

Attachment fits into the interior as organically as possible, as for the color and materials match the headset

Assortment of hoods for a private booth

Various pickers call these units in a different way: kitchen hoods, over-stove filters, cleaning air. However, in fact, go about your own accessories, the main features of which are cleaning the kitchen utensils. According to the features of the design, the drawstring can be divided into sprat groups, which are controlled by the shape, by the method of cleaning, by the method of fixing. Report about them.

Between themselves, drawstrings are inspired by the principle of work, forms and ways of fastening.

Behind the principle of work

The principles of the drawing work are a point of adjustment in installation, which is especially important for installation in private booths. For example, such buildings are often not equipped with a ventilation shaft. And in such a state of mind, you are faced with a choice: break through the wall to open air and install a complete ventilation system, or remove everything like that.

In the photo of the testimony, the principle of robotic flow (filtering) and circulation (vivid) drawing

Another option will help you to save pennies like on the very vityazhtsi (which type of attachment is important for those who find it), and on the installation work carried out (just attach it to the hat for this type). Until then, in this rank, you will save not more than a penny, but an hour. Otherwise, the power blames the effectiveness of such a system, even if it doesn’t appear again, but it circulates less and clears up in the new.

According to the specifics of robotic hoods, they are divided into two types: filtering and visual.

• Filtering. A draft for a kitchen in a private booth with a filtering system is considered a budget option and is widely represented among suspended structures. Such models are suitable for old houses, where it is impossible to install a ventilation system.

Instructions for the operation of filtering structures transfer regular replacement of filters, which are cleaned

The principle of operation of such outbuildings is even simpler. So, all fats and particles can be deposited on the fat filter, the rest of the cleaning is done after the carbon filter. As a rule, such a device should be equipped with a weak engine, which is enough for the stated purposes. Mostly the filters are not installed on the lids and should be replaced regularly.

• Vividni. This type of drawstring will require the presence of a ventilation shaft. Naturally, KKD outbuildings, which are to be shown repeatedly from the premises, we are looking for those, just to filter. What do you already have? ventilation duct, then install it with your own hands not in a difficult warehouse. If in the wall it is necessary to work to open the ventilation, then it is more likely to turn to fakhivtsiv.

Display models more easily enhance the kitchen with third-party flavors

Such drawstrings do not wash the hard filters, the shards in them are simply not needed. Zhiroulovlyuvachі in tsikh outbuildings are installed bagatorazovy, and shhomіtsya їh it is necessary to easily wash in miles.

According to the form

Zagal can be seen three types of kitchen hoods, which are breathtaking in shape: suspended, vbudovuvani and domed models. The skin of them has its own peculiarities.

Behind the shape of the structure, they can be hanging, domed, or vbudovuvanny

• Pіdvіsnі. Such fittings are often called "flat" because of their relatively small height and width. The stench is installed without a hitch under the kitchen hood. When it is necessary to protezhit, so that the lower part of the body of the installed drawstring was on the same line with the suede caps. Most of these models are brought to the budget class, stinks of stink are brought to the design, which is filtered, they wrote about them more.

Sliding models have compact dimensions, which allows them to be used in small kitchens.

The main advantages are the price and ease of installation, even in this case there is no need in the presence of a ventilation shaft.

• Vbudovani. As a rule, such constructions already mean the introduction of a wind pipe, even if the stench works in a flow mode. Vityazhka is installed the bells do not wind up in the ceiling; Only a part of the accessory is left in the eyes, so that it can be more big, hanging with a path.

Vbudovaniy prilad zahovaniya at the top shafі headset and practically unremarkable

• Fireplaces or domes. Vvazhayutsya the most popular on the current market. Nayimovіrnіshe, the reason for this is the difference in forms and materials of the work. So, there are often wooden and plastic inserts here, which give such accessories a high quality. Sweeping bright design and expensive decoration, often become the central elements of kitchen interiors.

Fireplace hoods are widely vicorous in kitchens with a classic or rural interior

Dani priladi took away their name through the similarity with a stone vented system, so such a vent in the kitchen in a private booth will look especially harmonious.

When choosing a fanny pack, pay attention to those accessories, which are equipped with tight motors, two fans and a great reserve of productivity. As a rule, such extensions are less noisy and more efficient.

For a spacious kitchen, it’s better to choose an accessory from two motors

Behind the method of fastening

According to this parameter, all the drawstrings can be divided into three groups: wall, island and hood.

• Pristinnі. Maut one flat side, which ensures the security of fastening to the wall. The most traditional type of drawstring. So, you can fit your mother like a horizontal roztashuvannya, so I’ll take away a part, so that I’ll make more work in the area, including the risk of hitting the body with my head.

Wall constructions - the widest type of drawstrings

• Islands. The design of such drawstrings allows them to be placed absolutely in any part of the kitchen. As a rule, the stinks are bathed by the masters of private houses from spacious kitchens, the surface of the kitchen is lined not with white walls, but closer to the center of the place. In most cases, such models may have vertical winding and insole reinforcement.

The island design vikoristovuetsya at the vent, as if in the kitchen of cladding the island with a cooking surface

All types can be up to the class "luxury", which are always equipped with electronic controls, are characterized by high productivity and are not cheap.

• Kutov. The main design of the hood drawstrings is related to the specific design of the hull, which allows you to most easily install such an attachment at the hood. As a rule, the motivation for the dressing gowns this typeє more impressions zahid, lower design khіd. Looking at the price, the range of similar products is not great.

The hood models effectively cover the empty space at the kutka of the room

See povіtrovodіv

Pipes for re-cladding are available in three types: round or rectangular plastic, or corrugated.

illustration	Description
	Round. It is considered ideal for stained-glass windows, be it of any type, shards create the smallest opera.
	Rectangular. I create a larger opir, lower round, shards of the outer opening of the drawstring sound round shape, and in this moment a small threshold is being created.
	Gnuchkiy. Self-characterized great support repeat, as if vinicating through the uneven corrugated surface. Also, the corrugation creates a singing noise for an hour of work and drawing. However, the stench is the only option in quiet valleys, as the channel of the kilka once turns on a short distance. Depending on their structure, wires of this type are stretched as much as possible during installation, in order to minimize wrinkles, and obviously, and opir.

Try to expand the ventilation opening at the wall directly above the hood, leather shards cut the air duct at 90 degrees, lowering the KKD of ventilation by 10%.

Try to open the ventilation opening over the hood. Any kind of zagina povіtrodu take away from the productivity of the unit 10%

In order to give the kitchen an aesthetically pleasing look, you can ventilation pipes behind the hats, or lay them on the stick of the wall and the stele. Prote, the smaller you will be between the ventilation opening at the steppe and the windmill - it’s better. About those, how to install a drawstring, you know from the proponated video.

Now you have already done repairs in the kitchen and didn’t want to “thrash” again, you can make some changes in your design. Before such operations lie down and vlasnoruch. Understanding, first of all, it will be decided what type of drawstring you need. Mabut, іz thogo mi th pochnemo.

Yakimi stink?

What is worth the type, then they are divided into filtration and evacuation. The first of them run repeatedly in the host through the filter system, and the others simply throw yoga into the outer middle. Zagalom, at the handicraft version of "modernization" you can independently install it in a cheap evacuation hood

Ale, especially pragnet tsgogo not varto: to create crafts and crafts of this class do not provide effective cleansing afterward, and their vartist is often unbearably high. In addition, the instruction for such a class transfers more and more guarantees for being independent.

Just a little later, it is pulled on the corrugated branch pipe and neatly fixed with a clamp. Lithium sealant is not varto: in a first step, it is better to simplify the maintenance of the installation. In addition, the pressure on the system will be lowered, and that will not get anything to the kitchen. Nareshti, corrugation, which is changing, will by itself be a powerful insulation.

Zreshtoyu, the installation of the hood is completed! Let's hope you know about the main points. It’s neobov’yazkovo to follow our reason and shove the sweatshirt into the closet, so that you yourself can come up with options for these fasteners.

Ventilation in a private booth is a necessary attribute that allows you to create a friendly microclimate in the accommodation, and save the integrity of all constructions.

If you are talking about the ventilation of a wooden booth, then the material itself will inadvertently let in the fresh air. Also let through the gaps at the windows and door frames with ventilation openings. With this pіchny dimar vikonuє the role of the venous canal.

Today wooden houses be practically hermetic. Tse became possible to use the zavdyaks of plastic hermetic vicons. This one has endless pluses: heat doesn’t go anywhere. Є th minus; natural ventilation is practically daily.

And here you have to go to the primus ventilation. Tse koshtuє richly more expensive. Primus ventilation saves electricity, which will require capital electricity. When designing a room, make sure that it is more beautiful with natural ventilation itself, as you can see about wooden houses.

Vlastuvannya natural ventilation

Vityazny canal is the best vivoodi on daks. At the same time, the higher the upper air will be, the stronger the difference will be, and the more intensive circulation will be created again. The walls of the canal are due to be smooth and equal along the cut. Tse to ensure high cravings, and drinking will not settle on the walls.

For cym forgive the rules, you can organize external ventilation at a private wooden booth. Above all, remember that a wooden budinok is the main source for natural ventilation, so this method must be oriented when designing and installing. Do not varto vikoristovuvat dodatkovі outbuildings. Tse zayve at the vipadku from a wooden booth.

Ventilation at the frame booth

The design of the modern framed huts is transmitted by the installation of a vapor barrier along the entire inner perimeter of the walls. Why talk about those that the atmosphere is in the middle frame booth completely insulated from the navkolishny world. Nor about the natural ventilation of the frame booth here and move buti. Ale needed to be vigilant to organize the circulation of the wind in the room.

In this situation, use ventilation ducts, as if from the kitchen and bathroom, go through the streets to the street, do not go in. Similar technology is used exclusively in bagatoverhovyh booths. Skeleton booth, ozumіlo, you can’t lie up to such. Here it is possible to organize primus ventilation, then, to blame the additional windows.

Now let's talk about the organization of the stream. In this situation, the natural way to organize is not enough, so the primus method is stagnant. For which vikoristovuetsya system ventilators, yak vityaguє іz zhitlіh prim_shchena poіtrya і nezhitlovі.

You can choose custom fans, which are sold in any radio electronic store, or you can choose special models, which will react to the appearance of a person or an increase in moisture again. At the entrance, such intelligent systems are widely used in the organization of ventilation in frame booths.

For internal ventilation, plastic wind pipes and fittings are suitable.
Є th іnshі nuances, which are related to the independent organization of ventilation frame booth. For example, it is not necessary to vicorate the winding of a square or rectangular cut. In working mode, the walls can often bend in the middle. Іz tsim i pov'yazane vikoristannya the most round povіtrovodіv. At the beginning of the organization of ventilation in the kitchen, it is better to win the hoods with a filter. Vіn vіddavаtіme cleaned poіtrya back at the reception.

It is rich who win for the organization of cooling the use of air conditioners, as they destroy the microclimate of the whole place. The stench also brings and additional windfall, po'yazanі zі spozhivannâm elektroenergії.

Vlastuvannya mountain ventilation

Otzhe, now ozumilo, now organize ventilation on the mountain of a private booth. Varto look at the report, how to organize ventilation on the mountain independently.

The whole process is composed of a number of subsequent steps:

1. It is necessary to know in the distance a place for a tidal installation. For her, it is necessary to choose the cleanest place on the mountain.
2. A fan is placed on the outer side of the dash. Vіn to take up a drawstring in the middle. It’s better to lie that you can see between the tidal system and the fan no less than eight meters.
3. Dali are mounted ventilation ducts. Like їх it is possible to beat the trumpet. At the end of the ventilation channels, diffusers or grati are put on.
4. Now it is necessary to install a heat exchanger. Yogo is directly recognized - cooling and heating up.

You can win and simple ventilation systems on the mountains. Є variant with auditory openings. The stench brings both practical and aesthetic melancholy.

Other applications

Sadiba is the dream of being a people. It’s good for someone to get their own wet little pouch. The kitchen of a private booth is the place where the master spends most of his free time. She's getting ready there for various strife, to please all the members of the family. Most of all, when cooking, write, blaming different unacceptable smells, as they spread around the apartment, where other members of the family can be. Ventilation is also required in the toilets of a private booth.

Kitchen ventilation in a private booth

3 look around increased water content Povіtrya that specks in the kitchen, people can blame different illnesses. To eliminate such unhandled varto, install a ventilation system.

In principle, the system is simple. To create circulation again, you can use natural ventilation. Sometimes varto open windows and doors. More houses in the private sector and trees. The stench of natural ventilation is created by a path of opening piece openings at the walls and windows. Whose whole is enough to keep the flow of wind.

Vityazhka

The drawstring can be made from different materials. The most popular among those who wear aluminum. Vityazhka can be installed independently or turned for help to specialists. For the organization of the ventilation, a fan is installed near the hood, which draws in all the outside smells from the kitchen.

Vykoristovuyutsya for ventilation mainly fans, which work in the form of 220 volts. It is possible to independently install such a vityazhka as a whole. Golovne, follow the elementary rules of safety technology.

Ventilation at a private booth near the bathroom room

Wart pay respect to the fact that the re-verification and installation of ventilation should be carried out before the cob repair robots. Installation of the gate and radial fan - after completion.

Ventilation near the bathrooms is responsible for ensuring ventilation not lower than for all SNiP standards. In addition, ventilation is due to the mother's simplest design for remote maintenance and low noise level. Varto obov'yazkovo stitches for yak_styu vikonannya robit. For this, you can follow it independently, or you can entrust it to the right of the designers, as they have broken up the project. And here, for the sake of victoriousness, you can not be turbulent.

Even though the ventilation duct of ventilation is not directly behind the wall, but after two or three appointments, ventilation at the bathroom cannot be organized by such a simple method. In this situation, bring the ventilation duct near the room. here mova go already about ventilation boxes. Іsnuє kіlka vіdіv ventilіynykh korobіv:

1. plastic box. Vіn mozhe mother or straight-cut, or round pererіz. It’s bad to conduct noise, but opir, which is hoped for by the flow, is minimal, which is necessary in this situation. Special fastenings are used for installation.

2. Corrugated box. Maybe two views - soft and zhorstky. This type of variant is the most victorious in case of insignificant weather, as well as in folding places for ventilation.

Ventilation of the boiler house in a private booth

Be it a boiler, if the gas burns in a new one, you see different oxides, as if through the dimar you come up with names. With this, it burns more cleanly. Weeping staleness - the more exhaustion at the boiler, the more it burns in the future.

Ventilation in the boiler house of a private booth can be done simply in a constructive plan. There is an opening at the wall, and a ventilation pipe is inserted into the new one. The outer pipe is completed with a screen, and from the inner side - with a gate valve. Such ventilation is called natural. Von pratsyuvatime zavzhdi nezalezhdi vіd dіy people.

Such ventilation needs more dimar for the boiler house. If ventilation is being designed, it is necessary to protect, some kind of firewood vicorist should be used for scorching. Tse mozhe buti gas, electrics, or else it’s hard to burn.

In order for the boiler room to have good ventilation, a three-time wind exchange is required. To reduce the circulation of heat in the boiler room of a private booth, you can use different methods. One of the most effective is the installation of intelligent climate systems.

The ventilation system in the boiler room of a private house can be successfully upgraded to air conditioning. Systems of this kind are easy to do. The tide rises again with the help of additional mechanics, and the ventilation works with the help of the retraction.
Similar systems can be enough high level noise and dosit significant dimensions.

Keep in mind that even if the ventilation system was installed for the boiler room of a private house, it is better to trust the robot to the fahivtsy. Obviously, all systems, as described above, can be developed and independently, but for which it is necessary to develop all the developments of the project.

Do-it-yourself ventilation in a private booth

Ventilation at a private booth allows you to inadvertently pump the skin of people, as if competently providing fresh air at your booth. The video is pokrokovo rozpovidaє, how to install ventilation in the whole house, so not only in living quarters, but also in the boiler house, kitchen and bathroom.

Rozpovіdaєtsya, how to organize a tide again and again and yoga. It is reportedly shown how to make a sweatshirt with your own hands, as well as how to win the capacity of the life itself for organizing natural system ventilation. Automatic systems With the help of the most recent possession of this video, it becomes easy to install and charge. Now the skin can, without any particular problems, take care of the installation of ventilation, be it folding in the house.

It is important to show a modern house without a kitchen hood, even a ventilation system for a mentally comfortable atmosphere in the kitchen. Vaughn ryatuє vіd nepriemnymi odours, protect vіd garu, purіpіtrya vіd vіd їzhі їzhі saw, vidalіє shіdlі vіchovіnі, scho utvoryuyutsya іn gorіnnya gorіnya protsesі gas. Installing a hood is important on the right side of a private booth. To that it is necessary to go to її choice and installation with seriousness, especially as it is necessary to work with your own hands.

See the drawer

You can see the hood that is being installed over gas stove, can be divided into:

• suspended;
• awakened;
• stone.

Suspended drawstrings

Vіdrіznyayutsya low height and flat shape. Often they are placed over wardrobes in the kitchen. Plusy hanging drawstring- ease of installation with your own hands and a low price. Don't demand stench ventilation opening, to the fact that it is really filters.

Vbudovuvani hoods

The bells do not wind up in any way from suspended structures, but they provide flow ventilation to the booth. Taka kitchen drawer, installed with your own hands, attached with wardrobes and do not fall into it at the vіchі.

Fireplace hoods

They are also called domed. The stench can be of different forms, made of plastic, metal, wood. Such drawstrings can already be an exclusive decor, transforming the space above the gas stove into a part of the interior and another rodinka.

Also drawstrings can be used for the type of fastening:

1. pristine;
2. kutovimi;
3. islands.

Drawstrings

This type of the largest extensions. Їх krіplyat іz one side to the wall. It's easier to install with your own hands. Hoods are suitable for kitchen configurations, where the stove is installed in the hood.

Ostrіvni vytyazhki

You can install them in any part of the kitchen. The stinks ring vicorist in quiet interiors; Such windings over the gas stove lie down to the expensive segment. Therefore, the stench may be low for additional functions and electronic control.

You can also add drawstrings to:

• filtering;
• visible.

Filtering drawstrings

The stench is more suitable for old wooden houses, country houses - that is for quiet houses, de ventilation cannot be built through the presence of a cat or the features of a house. Such sweatshirts wash fat and ugly filters, like they clean it again with a saw, fat and wood. Such filters are sometimes replaced. Koshtuyut qi hoods cheaply.

Draw drawstrings

Їx install there, de є ventilation. IN zamіskom booth tse best option through yoga high productivity. There is no carbon filter in visible drawstrings. The fat filter was replaced by a grease trap, which is not replaced, but periodically washed. At the booth, you can install such a drawstring with your own hands.

In the kitchen, it was important that the drawer functioned hopelessly. Therefore, cleaning and changing filters is the basis for comfort. Until then, the cleaning of the fat filter will ensure safety.

At a private booth, almost all kinds of drawstrings are used. There is a growing trend that at the great residences, de ventilation, work on a professional level, in the kitchen more often vvazhayut for the better building of the island vityazhka. At the wooden splendid boudinka, a sizable wall hanging is widened.

important: Vibirayuchi vityazhku, varto vіddavati perevaga to the booth models from two fans, the great effort of productivity. Such windings in the booth see less noise and are more efficient.

Yaku vibrati vityazhku (video)

Vybіr vytyazhki to lay down also in the fact that the booth has ventilation. At a wooden village house, it is rare to see ventilation shaft. At this point, ventilation is expanded and it can be done with one's own hands. You can create a complete ventilation system or choose the simplest filtering model of the hood. In this way, you can truly build everything with your own hands. Ale vvazhat, scho such a sweatshirt - povnotsіnna ventilation, not varto. There's filtering again, not removing yoga from the place and just cleaning yoga.

Installation of a drawstring

Do-it-yourself installation of a hood in a private booth is not so easy to do. Kitchen ventilation it is possible to break up the way of the houses already, and it is impossible to build channels in the walls. When installed in a private booth with hand-drawn hoods, the standard ventilation may be damaged by incorrect ventilation. If nothing happened, it’s enough during installation to stretch the rewind box to the draw and install the clapper valve. In this way, the ventilation will be secured, and the wind chimney will be installed.

And the simplest ventilation is the opening at the wall, where we can start the ventilation later. For a winder it is possible to vicorate corrugations or plastic pipes. Creating ventilation, it is necessary to open the opening of the ventilation over the drawstring.

important: For drawstrings, it is best to choose a round cut trumpet. Corrugated pipes fortunately, that you can vine on the vlasnyy investigation under the be-yakim kut, which means much easier installation at a private booth. And yet, such ventilation, when working in a booth, makes noise through the great open air.

It is better for everything to install a vityazhka in a private booth over a gas stove, especially when it comes to a wooden house. Install the structure at a height of 70 cm and above the heating appliance. Otherwise, the sweatshirt is badly managed with its own bindings, or it will suffer in the heat in the fire.

There, the wall hanging sticks to the walls, it needs to be insulated. This is especially important, as it is about a wooden private booth, since it is not broken from concrete, but from an easily borrowed tree.

How to install a drawstring with your own hands (video-instruction)

Connecting a drawstring

If the ventilation is thought out, it is necessary to connect a drawer. At a private booth, three wires are connected to the yard for additional wires - zero, earth, phase. Plugging in a drawstring, you can't forget about grounding. However, in this capacity it is not possible to beat the batteries, blow. Grounding is chipped to a dead neutral. But if you don’t know that knowledge, then independently connect the drawstring not varto at the shield.