Plastic v_dvedennya repeat. Plastic boxes for ventilation - do-it-yourself healthy microclimate

⁰

Ventilation is an indispensable part of the life safety system, be it a living, administrative, state-of-the-art life. Behind her help, one can see the vologda's plant, carbon dioxide and foreign odors. Ventilation ensures a tide at the place of fresh wind, creating a comfortable microclimate.

The ventilation system is made up of a number of elements, leather from some of the most important tasks. One of these elements is povitroprovid. Assigned to the air duct, the air is blown at the transmission of the fan, when it gets wet, to the ventilation shaft, the booth or to the street. The best material For the preparation of air ducts, there are plastic boxes for ventilation. Dani have shown themselves to be good in the process of exploitation of ventilation systems in different minds.

Advances and Advances

For the preparation of plastic boxes for drawing, polyvinyl chloride is used - a unique material that will add a lot of positive qualities.

So, ventilation plastic boxes, made of polyvinyl chloride, may need the following power:

environmental safety;
mechanical strength;
elasticity;
resistance to chemically active and organic rinds;
resistance to temperature differences;
small pet vaga;
the possibility of creating a practical way to form a wind pipe;
ease of installation;
ease of service;
possibility of dismantling with a method of mittya or repair;
incombustibility;
wide range of colors;
diversity of forms and expansions;
available price.

One of the biggest advantages of ventilation boxes made of plastic, their building organically occupy space in the premises of any recognition. Tsim virobam, after installation, non-necessary additional improvement. Reception zvnіshnіy vglyad and smoothed form poіtrovodu look good and in living quarters, and in administrative budіvlyah.

The smooth interior and exterior surfaces of the PVC windpipe provide practically seamless passage through it. On such a surface, mechanical particles are not trimmed. Fat, which otherwise settles in the middle of the trumpet, is easily swirled with a warm, mile-long scent.

Important: Place plastic stained boxes in the premises promoted vology, such as bath-rooms, kitchens and toilets.

See, understand that equipment

Behind the form, boxes for the preparation of windings are round, rectangular and square cut. The most popular are the scallops of a rectangular shape. The stinks easily fit into any interior and harmonize with any furniture. Today for sale there is a great selection of forms and expansions of plastic ventilation boxes. Tse allow me to know їm zastosuvannya at the occupants with a different area and obsyag.

Mayuchi standard wall thickness 3-4 mm, rectangular plastic ventilation boxes may have the following parameters:

retin - 110 × 55 mm, 120 × 60 and 204 × 60 mm;
canal valley - 50 cm, 100 cm, 150 cm, 200 cm and 250 cm.

The number of choices can be as follows:

white;
plain color;
pіd tree.

If you don’t want to go out of the options, then you can work like this:

Elements of a plastic winder

pofarbuvati povіtroprovid;
glue the box with trellises or with an adhesive line for the color of the interior;
building for a povіtryanoї main line a box of gypsum board with further amenities;
sheathe pov_troprovid sheets of PVC plastic under the color of the steel;
place the construction of the wind pipe under the plastic hanging stele.

For the convenience of the installation, the required form of the wind pipe for the pipeworks is to show a great selection of additional elements.

So, for a set with pipes, you can add the following details:

Wall plates. For the arrival of the guide to ventilation shaft that decorative attachment to the mounting opening.
Kuti for straight pipes. Appointed for the current day under a direct cut. Buvayut vertical that horizontal vikonannya.
Kuti for rectangular and round boxes. Vykoristovuyutsya for z'єdnannya round and flat fragments in the main line under a straight cut.
Kuti for small boxes. Serve as z'ednannyam for rectilinear parts of a different cut.
Couplings of straight-cut boxes. For the connection of straight-cut mains.
Couplings for straight channels with valves. For cutting straight-cut plastic parts. Mayut zvorotny valve to protect the air from the ventilation shaft or from the streets to the destination.
Couplings are universal Designed for the connection of ventilation plastic rectangular boxes with a size of 55x110 mm and 60x204 mm under any kind of hood.
Couplings for straight and round fragments. Vykoristovuyutsya for z'єdnannya pryamokutnyh and round korobіv.
Trimachi. Serve for access to walls or walls of plastic boxes for ventilation with a size of 55 × 110, 60 × 122 and 60 × 204 mm.

Installed box

After having installed your choice on a stained plastic box, it is necessary to carry out a preparatory work for this installation.

Before them you can see:

Folding for the project of the povіtrovodu.
I choose and purchase the material.
Tool preparation.

Project storage

Preparing the project for such a clumsy design, like a povіtroprovid, not in a warehouse of great difficulties. For this, stitch 1-2 arches of paper and 20-30 minutes per hour.

The scheme of the passage of the next main line is drawn, for which it is insured:

footage of the dermal mind channel;
number and type of columns, junctions, transitions and triplets;
type of wall plate;
number of vlasniks and kripilnogo material.

After the design of the material, you can proceed to the purchase.

Purchase of material

Irrespective of those who budіvelnі shops may have a great variety of goods in their order, far from everyone can get a new translation of the necessary. Prices on the same scale can be adjusted. Therefore, before going for the goods, it is recommended to carefully familiarize yourself with the sites of stores in the area. Allow me to spare an hour and a penny.

Choose your purchase

Buy the next set of virobiv of one virobnik. In this case, the additional elements and ventilation plastic boxes may be the most suitable one for one.

When adding material to the material, pay attention to the following nuances:

visibility of the certificate of quality of the product;
the presence of mechanical ears on virobs;
geometrical correctness of the forms of boxes and components;

Note: The reliability of the production of all the details can be checked at the store. Parts of the fault enter to the grooves tightly, ale without zusil.

Tools

Navit such a simple robot, like installing a plastic box for ventilation, using a minimum set of tools.

Necessary tools

Tsey nabіr vengeance:

perforator;
hacksaw for metal;
roulette;
weekly rіven;
marker or olive.

Having prepared and checked the correctness of the instrument, you can proceed to the installation of the wind pipe.

Installation of a ventilation plastic box

The highway can be rebuilt in two ways. The widest possible є її stowage on furniture. If the installation is carried out in the kitchen, then the installation is simply installed on the ceiling. Vіlniy hіd z'єdnаn allows you to accurately adjust the size of the plastic box for drafting.

If the box is not laid on furniture, it is impossible to lay it on the walls or on the steel.

And here the order is as follows:

a plastic transition is installed on the drawstring;
a wall plate is fixed on the wall;
a vertical fragment of the box is seen and pierced with fixings in the grooves of the upper and lower passages;
the vertical sash of the box is inserted into the drawstring, it is fastened to the hood;
vіdmіryayutsya, vypilyuyutsya and z'єdnuyutsya muffs (like sections of kіlka) horizontal fragments of the wind pipe;
after the fitting of one horizontal run, it is carried out on the surface for additional trim;
prepare for an offensive prognosis of the channel, insert at the plastic sleeve and fasten with braces;
the wire is inserted into the wall plate.

The work is finished. Now the application will be relieved of the smell of that water.

Video about ventilation installation

Ventilation in the kitchen is both practical and aesthetic function. Installation of a plastic povіtrovodu kitchen hood allows you not to dihati with viparami, as it will inevitably accompany the process of cooking food, that safekeeping of kitchen furniture. The vityazhka is installed directly above the stove, and the ventilation shaft can be located somewhere else. For the current day, special pipes are used - wind pipes.

Rіznovidi

Air ducts, which are victorious for a kitchen draft, can be adjusted for the material of preparation, the shape and equal hardness. The best option for ensuring ventilation in the kitchen is corrugated PVC air ducts.

Plastic pipes are considered a great term for exploitation and ease of installation. In addition, PVC products are safe in terms of ecology and hygiene. Zіrobi for kitchen hoods can be made from smooth plastic. Krіm tsgogo, povіtroprovody can mothers of raznі razmіri, straight or round cut pipe. Rectangular plastic pipes are good in terms of installation, then round pipes for drawing can increase the throughput of the building.

Rosemary and constructive features

Remember that when buying PVC pipes, it is necessary to stock up on adapters. The stench is needed for the installation of plastic pipes and hoods. Also, adapters are vikoristovuyutsya for the windings of the windpipe and the connection to the central ventilation. The number of adapters that are recommended is not less than three. Although corrugated plastic pipes are used for knitting, then pipes can be protected on adapters for the virgin pipe.

Dovzhina PVC pipes can be re-visited three meters. In addition, the productivity of the stretching is reduced with a skin supplemental meter. Leather vigin trumpet also negatively affects the functionality of the kitchen hood. When installing a piping in the kitchen, apply a unique 90 degree cut. Tse to cause overwhelming of the tie, which means to reduce the term of service to the public. The maximum allowable number of kolіn and viginіv is not guilty of revisiting three.

The diameter of the plastic pipe may vary according to the size of the ventilation opening.

Rozmіri rectocut kitchen counters PVC standard. Basically, the following values are used: 110 * 55, 120 * 60 and 204 * 60 mm. Rosemary round plastic pipes vary from 110 to 150 mm in diameter.

You can practically come to any emergency store. Varto designate that the bellows should be costlier, lower flat PVC channels.

Mounting

The most practical and handy for installation - chain corrugated fiber. The stinks are rіzhutsya on shmatki prіbіbіnnogo razmіru and z'єdnuyutsya with the elements of the hood and the ventilation shaft in the kitchen. It is recommended to replace the original ventilation grate with a special one - with a built-in suitable branch pipe. Z'ednannya vіdbuvaєtsya for the help of obtisk collars. For greater tightness, it is necessary to coat the sticks with a sealant. Varto see what corrugated pipes are installed at the maximum stretched position. Such a pidkhid ensures the nominal throughput of a building kitchen ventilation.

Pipes for the PVC windpipe are mounted according to the same scheme. The pipe is cut with a hacksaw for metal on the pieces of the required expansion and fastened to the elements of the drawstring for additional adapters. The pipe must be allowed to enter the branch pipe by approximately 50 millimeters. Mіstsya z'єdnan are coated with silicone.

Please! The installation of the hood is dependent on the improvement of the movement around. Otherwise, the term for the service of a PVC pipeline will significantly decrease.

Yakshcho ve installed I will push the drawstring you may experience a craving effect. In other words, the kitchen will be full of aromas from the hot ventilation shaft. The price of tight models, whose productivity becomes close to 600-700 cubic meters per year. To avoid such a phenomenon, it is recommended to install a gate valve. The attachments can be of two different types: a plastic type or a plastic disk on the axis. The valve is obliged to be installed vertically, otherwise it should be spratsovuvatime under the vlasnoy vaga.

You can work it out in a different way: put in a drawstring without a middle overhead. For whom at the wall of the booth to open the door required diameter. The next thing to know is that before the cob of such robots it is necessary to take away from the GKG and BTI.

To avoid such difficulties, it is recommended to consult with the seller about the tightness of the drawstring and the correctness of the parameters from the kitchen area. For the needs of the average sim'ї, as a bag in a typical bagatopoverhіvtsі, as a whole with a low-strength drawstring.

How to hide food in the kitchen

Plastic wires organically fit into the design of the premises, lower metal ones. Ale navit stink can zіpsuvati vyglyad kitchen, more people vvazhє for better prihovuvat tsey element vyazhki. Іsnuє kіlka ways of such masquerading.

Kitchen hoods are badly hovayutsya under bagatorіvnevymi, pіdvіsnimi or tension stele. For which a special box is being prepared, which will bring almost the entire curtain system. And all the way to go only in that vein, as if starting overhaul in the kitchen from a replacement steel. As soon as the vityazhka is installed after the repair, it’s unlikely that it’s possible to get into it.
For masking windpipe You can order or make a special box made of PVC. This decorative element can be matched to the tone of the decoration. In addition, additional lamps can be inserted into the box.

As for the kitchen, furniture will be bathed, broken down into a charm, you can place a stained-glass window in it. In order to build, enough to tell about your house master and the installation of furniture. Povitroprovid can be stationary in the kitchen cabinets or break up in the option that hangs.

Zreshtoy, you can just turn the windpipe. As if to show the same fantasy, you can show the whole original embellishment for the kitchen.

If all elements of kitchen ventilation are of the same color, it is recommended to bring ready-made kits. Deyakі vyrobniki sell their products according to the scheme: vyazhka + povitroprovid + additional element = okіsna ventilation in the kitchen. I give special respect to the varto to add the quality of the materials. Keep in mind that braces made of non-stained syrovina, or with damaged vibrating technology, will serve you no more than 5 years. At the same time, as a PVC screed, the sills were overwritten for at least 30 years of operation.

Primus ventilation systems are practical in a leather apartment or a private booth. The stench is stacked with an addition to the parkan in a row and a box for a drawstring, which can be used as a different materials. A plastic version of a wide-width boot due to low cost, durability and ease of installation, which can be done independently.

For the normal functioning of the ventilation system, it is necessary to loosen the parameters of the air duct. Mostly for butt purposes, you can choose plastic boxes of standard shapes and sizes.

Rules for choosing a pipe cut

The main parameter of the ventilation duct is the third internal overhang. Vіd nіgo і vіd tightness of the drawstrings to lay down the flow of the flow by the channel. Peretin is selected randomly for the maximum obsyagu povіtrya, scho skipped. Normative documents, Since there is no way to regulate the speed for butt plastic windings, they are guided by a practical way of changing the value, equal to 3-7 meters per second.

The size of the cut of the box is taken equal or more large, lower at the branch pipe of the winding pipe, the size of which is indicated in the passport of the annex. If it is not planned to regularly switch to the maximum regime, then in which case it is permissible to change proportionally the ventilation duct cut to the size of the exit opening.

For small kitchens, it is possible not to vicorate the maximum tension of the drawstring. Tse give the possibility for the help of a vicorist adapter to install a pipeline of a smaller diameter, the lower one is indicated in the instructions

So, even though S is the area of the ventilation pipe opening to the winding duct, N is the total airflow that is passed through at the maximum mode of the extension, M is the total throughput airflow under the planned mode, then it is necessary to cover the area of the duct overflow according to the formula:

P = S*(M/N)

Insufficient size of the perimeter of the box to bring to significant swidkost ruhu povitrya, zbіlshennya tertya і, as a result, to such negative effects:

there is an increase in the trend on the ventilation mechanisms of the draft, which will lead to a change in the operational resource of the building and additional electricity supply;
in the aftermath of the increase in the support due to the decrease in maximum productivity, which changes the total airflow of the host;
due to the vindication of aerodynamic effects in the ventilation duct, equal to the noise during robot growth;
there is an increase in the pressure on the middle of the system elements, as well as the elimination of vibrations, which will require more pressure and sealing.

If the ceiling of the box will be larger, lower it is necessary, then it will not negatively affect the functioning of the primus ventilation system, however, it will lead to financial losses. In addition, the ventilation ducts and other large ducts of the great folds are installed and built into the design space.

Table rozrahunku zalezhnosti svidkostі flow vіd natuzhnostі vytyazhki i dіamera round voіtrovodu allow є correctly vybrati razmіr ventіtіynoj channel

See forms and types of expansion

Plastic boxes for ventilation can be round or rectangular shape. The circumference is the smallest perimeter of the povnyann with smaller geometric figures for the same area. Therefore, from the position of minimization, the support of the inner surface of the box to the collapse of the inverted flow, which is generated by the winding, shortening the round shape of the channel.

For sale for butt purposes, the widest round plastic boxes with foot diameters:

80 mm, cross section area 50.3 sq. cm;
100 mm, cross section area 78.5 sq. cm;
125 mm, cross section area 122.7 sq. cm;
150 mm, cross section area 176.7 sq. div.

Ventilation ducts of a rectangular shape are easier to fit into the interior of the premises, as well as to place them in niches. kitchen cabinets above the suspended or tension stele. The largest widest boxes of such expansions:

110 x 55 mm, cross-sectional area 60.5 sq. cm;
120 x 60 mm, cross section 72 sq. cm;
204 x 60 mm, cross section 122.4 sq. div.

At different needs, you can know the elements of the ventilation system of a larger size. All plastic boxes for butt purposes round shape diameter 200 mm and rectangular diameter 220 x 90 mm. However, first of all, it is necessary to change the possibility of adding all the elements, which allow you to induce a re-wire for drawing the required geometry.

A large range of colors of plastic pipes and boxes for ventilation of living quarters allows you to easily fit air conditioning into the interior

Plastic shaped elements

Ventilation systems from the hood to the shaft draw a different geometry and topology through individual approaches to the planning of kitchens. To that, special elements were transferred for the implementation of a practically be-like configuration of a plastic box.

Ventilation ducts with straight elements of the wind pipe of rectangular or round shape. Їhnya standard dozhina become 0.35; 0.5; one; 1.5 and 2 meters, however, you can independently for an additional hacksaw, or the grinders will cut the necessary size.

If it is necessary to take a straight piece with a length of more than two meters, then її mount behind an additional deck of fragments in a standard frame with different special fittings for plastic channels. For this increase in the dozhina of the house with the help of the expansion of the world, there is no need.

Another necessary element is the number, for the help of which, to sway the turn of the wind pipe at a kut of 90 or 45 degrees. For boxes with a rectangular shape, the elements are changed directly horizontally and vertically. To turn on the kuti, not a multiple of 45 degrees, you need to call different circles. Fallow in the necessary kut, one of the sides of the stern is to be cut.

Shaped elements: 1 - straight channel; 2 - round channel; 3 - z'ednuvach round channels; 4 - length is vertical; 5 - length is horizontal; 6 - number of different cuts

To change, form a box with a round rectangular (or navpak) vicorist special adapters. Їх zastosuvannya, as a rule, is zoomed in by retail forms ventilation channels with a vyhіdnoy virva of a drawstring or a lapel at the overhead slats. The stench can be straight as well as hooded. The sale has the most wide such options for the transition:

from a diameter of 100 mm to a size of 110 x 55 mm;
from a diameter of 100 mm to a size of 120 x 60 mm;
from a diameter of 125 mm to a size of 204 x 60 mm.

If it is necessary to change the transition to a different size of the plastic box without changing the shape, then stop the gearboxes. For round options, use a special universal adapter, which can be used to fit all standard sizes.

For the design with a folding topology, the transfer of tees, for the help of which it can be possible, can be used to close the flows in the air in a few drawstrings, for example, from the kitchen and from the bathroom, to the exit. The stench can be rectangular, round, and also combined in shape.

Shaped elements: 1 - z'ednuvach flat channels; 2 - kolіno round; 3 - straight adapter; 4 - adapter kutovy; 5 - round reducer; 6 - straight cut gearbox

The fastening of the elements of the box to the wall is protected from the jamming. So, as plastic structures are blown into the metal with a small vag, their installation is not foldable. The details of the factory manufacturing are inexpensive and fit well into the interior, so the choice of self-contained designs is unacceptable.

Install the overlay or mount it on top of the opening in the wall, which leads to the ventilation shaft or to the street. The grate, as necessary, may be replaced by additional openings for ventilation. At this vapad, it is necessary to transfer back to the penetration through qi, open the reversed flow, which is generated by the wind, back at the reception.

In order to prevent the vindication of the circulatory traction in case of an impractical traction, stop the cesspool valve. Vin can be integrated at the rear of the plastic channel, or this function can be activated by blinds of the ventilation grille. At the time of such an outbuilding, the premises may be located again from the streets or from the ventilation shaft.

Shaped elements: 1 – universal reducer round; 2 – round tee; 3 – rectangular tee; 4 – trimach round; 5 – straight cut trimach; 6 - overlay for round channels

Features of the design and installation

The installation of a plastic box for ventilation from a kitchen hood can be done independently without radiation of fahivtsiv. If necessary, it is necessary to take into account the inconvenient features of the design and installation of such systems.

The nuances of choosing the geometry of the ventilation system

The great diversity of constructive elements makes it possible to practically implement the geometry of a plastic ventilation duct. However, in order to preserve the functionality of the system for the passage of wind on the flat level, when designing a wind pipe, it is necessary to follow the following rules:

If possible, it is necessary to minimize the length of the box. The optimal distance from the exhaust pipe to the ventilation gates is less than 3 meters.
Bazhano do not beat the great number of elements, which change directly the flow of things. Vagini, sounds and different transitions create an additional aerodynamic opera.
It is necessary to minimize the number of columns from the box by 90 degrees. The stench creates the greatest support for the flow, generates noise and accumulates deposits in looking fat and a saw that has stuck to the ground.

At the time of the placement of the box, there was a scorching riser or another heat source, it is necessary to heat the plastic to a temperature of more than 50 degrees Celsius.

For which it is necessary to either surround a hot object or lay a thermal insulation between it and a wind pipe. As an insulating material, it is easier to use polystyrene foam, as it has a low thermal conductivity, and also will not create noise when the box vibrates.

Implementation of a bypass of the scorched riser for additional help of chotyroh kolіn іz kutom 90 deg. With a different orientation to the channel, the yakby to the wall of the boulder was a steep ridge, it would be possible to get around with 15-20 degrees of kums for the help of a different hull.

Gate valve and grati

A necessary element of the ventilation system is a gate valve. If the box goes only through the vents to the shaft and can’t see the fence on the other side of the fence, then the valve is installed in the end of the wind pipe, or the special grille with the blinds, so that the turn is reversed.

At the same time, a small fence near the ventilation system is equipped with a check valve to install a dermal ventilation system with the main air duct and one more grate.

Typical solution for the placement of gate valves in the ventilation system for the presence of two points of the fence and the outside gate

In times of need to support natural ventilation in case of ventilation, there are three solutions:

split the exits for primus and natural ventilation, and the stench is not guilty comes out to one ventilation shaft;
install a tee “vityazhka - grati - gate valve” for the outlet;
vikoristovuvat ventilating grate with slits for natural air circulation and zahistovy vіd zvorotnoї draught.

Birds or grizzlies, which linger at the ventilation shaft, sometimes penetrate into the middle of the windpipe. Having leaned against the vines of a plastic box, they can bend over, as a result, the products are laid out at the recipient. In order to secure such a development of the gate, which leads to the street or to the mine, it is often secured by a special guard, indispensable for creatures.

Protection of the ventilation grate against the penetration of birds and grizzlies significantly sounding peretina, which must be fixed when opening the opening diameter

Fastening and placement of a winder

D_lyanki plastic povіtrovodu vіd vyazyki to ventilіynyh ґrat can be fastened. different ways in the fallows, in their position, there is a closet, a wall and a stele. For any option, the installation does not become folded and її can be carried out independently. However, it is necessary to go to the end of the procedure in a viable manner, in order to avoid noise from vibrations, as well as sagging or other deformations of the box with a possible distant sealing.

Like a box of stitching in the middle of the wardrobe, it is fastened to the back wall of the wardrobe for additional collars. It also fixes the passage of the wind pipe through the walls for the help of foam plastic or foam polystyrene inserts. These materials do not see noise when closed with vibrating elements of the system.

At the same time, roztashuvannya part of the windpipe over the wardrobes is the simplest way to fix it to the wardrobe for additional trims and self-tapping on the tree of a small dovzhina. A plastic box in such a position does not create a little bit of a big vise.

When fastening the windpipe to the wall or steel, it is recommended to roztashovuvati trimachі after 1 meter. Fixation is required for additional special clamps, so that you can fit the shape and size of the box that you buy. The weight of the entire plastic construction is small, so it is easy to finish the hardening of the viconate.

The plastic box can be buried again behind the hanging wall and drywall. In any case, it is permissible to carry out sealing and strengthening of the entire structure without improving the visual dispersion

Like a plastic box, it will be a tension or a suspended stele, it is necessary to check the superiority of the yogo fixation when the work is done at maximum tightness. In other situations, strengthening can be easily strengthened after the manifestation of weak areas.

At other times, the operation of the ventilation system can rattle or rattle, calling with a dot of vibrating elements of a plastic box with hard objects, such as a wardrobe, a wall, etc. In this way, it is sufficient to lay foam rubber and polystyrene foam between them.

Ensuring the tightness of the plastic box

Elements of the ventilation system, made of plastic parts, do not damage. Rosemary the sticks in a good way, prote in a deaky hour through the deformation, the width of the deacing half can change.

In case of damage to the tightness in the areas of the constructional elements, it is possible for the air to penetrate from the ventilation system of the name. In this way, there is a widening of smells and a watery wind on the premises, through the yaks pass the wind. In addition, when passing through the slots, sometimes there is a significant noise.

Regardless of those that all the elements of the yoke plastic box fit snugly one to one, it is better to add an hour of sealing the sticks.

To prevent the sealing of a plastic ventilation duct, there are two solutions:

Lubricate the construction sticks with a special silicone or acrylic sealant. Apply with a thin ball the edge of the element before inserting it into the system.
Wrap up the area with a stitch that will self-adhesive. Such a method can be stopped after the system has been installed at the time of the detection of the sealing point.

The first way is more reliable, prote mozhlive serious problems if necessary, the ventilation duct is selected for repair, cleaning or changing its geometry. Over time, the sealant of the flooring strongly binds the structural elements, so in some cases it may be necessary to sacrifice one of the details for the analysis of the system on the cob.

The method of proper sealing, on the other hand, makes it easy to carry out the analysis of a plastic box. However, this method is indicated for old-fashioned constructions, it is practically not possible to zastosovuyut, as if it is overstuffed on the vase.

Video-apply for choice and installation

Installation of the kitchen box. Liquidation of gaps at the sticks of structural elements for additional silicone sealant and self-tapping. Vibration protection for additional mounting pin:

Installation of a plastic pov_troprovod for drawing in the kitchen. Fastening elements between themselves, fixing to the stele for additional help:

The operation of the non-return valve for the functioning of natural ventilation on the butt of the tee "Vitazhka - Grati - Natural Ventilation":

We have provided information about pidbir, ways to build and build the main warehouses of plastic ventilation ducts to help build an overhead box for kitchen ventilation with your own hands.