Install 2 gas boilers for a private booth. Installation of a gas boiler in a private booth

⁰

The main element of the scorching system of a private booth is a boiler. IN stay rocky, more and more boilers are needed, which work on natural gas. They need to heat up the heat and to lay down the productivity, so that it will be warm in the booth. Therefore, choose the correct installation of gas boilers at a private booth great value. І be put up to which task you need seriously.

Short video instruction for installation

See gas boilers

The classification is like this:

By confession: only for singing (single-circuit) and for scorching with hot water in boilers (double-circuit).
By vibration strain:

low pressure - with one-stage regulation of tension,
average productivity - with two-stage regulation of tension,
highly productive - with modulation of tension regulation.

According to the type of draft: on ventilation (closed type) and natural draft (atmospheric, open type).
For installation type:

mounted, with heat exchangers, vikonanims with midi,
pіdlogovі - with a heat exchanger, prepared from chavun chi steel.

Perevagiїх vikoristannya polegayut at the offensive:

The stench is ecological;
Compact and noiseless robots;
Easy to use;
Їx can be installed at the living quarters.

Ale stinks may іstotniy nedolіk - vibration insecurity.

Wimogi to the accommodation for gas boilers

Gas boilers can be installed in a closet, kitchen or basement, special annex. Prior to the arrival, in which the installation of gas boilers at a private booth, the songs of the vimoga hang. The stench is however, for any kind of application, that pole at the offensive:

The application can be well ventilated, from obov'yazkovym equipped with a hood.
At the windows, there are but the front quarters, at the lower part of the doors there is a small gap.
Stele height - id 250 cm, obyag pri_shchennya - view 15 m2. Skin loneliness gas boiler vmagaє additional volume (0.2 m2), so you can easily go to the cauldron for service.
, which should be used with an installed boiler from others, it is necessary to use incombustible materials, so that the fire is not supported.
At the basement basement, the occupant may have a transfer of okremy to the street.
The prisoner is guilty of rozmіschuvatsya no more than a deaf wall of a living booth. Minimum distance to the nearest window - 4 m, Height from ceiling to ceiling - 8 m.

Installation process of a wall-mounted boiler

It is necessary to protect the wall of the wall under the cauldron with a ball of whatever material that does not support the mountain. Between them and the wall they cover the gap (4.5 cm).
Before starting the installation of natural gas boilers, it is recommended to pass water through the cauldron under pressure. It is necessary to clean the inlet tubes in the form of a dry smittya, as it will inevitably remain on the walls after picking.
On the pipes, which supply water, install a filter and lock fittings (before the filter and after a new one).
Mount dimar. For consumption, you need to check the draft.
The most important moment is the connection to the gas pipeline. Yogo mayut vikonati spetsialisti gas service. For which metal pipe is needed, that special bend, through which it will be installed.
On completion of the installation of a wall-mounted gas boiler in a private booth, it is necessary to connect it to the electrical supply, ensuring automatic extension for zahistu vіd navantazhen.

Installation of a pidlog cauldron

Podlogі kotli, especially chavunnі, mayut znachnu vagu, for this purpose it is necessary to build a pedestal (mіtsnu basis). At the annex for which they are poured. In other places, to finish the mitzmi wooden pidlogs under the boiler, place a shmat of a galvanized sheet girder.
Installation zdіysnyuyut control of the yogo position for the help of equal.
After a non-intermediate installation, a connection to the chimney is connected and the draft is re-checked.
Start the boiler from the scorching system in the middle of the booth. In order to protect the heat exchanger in front of the entry of the return line into the boiler, immediately after the exit line, which fills the system with water, install a coarse filter.
For double-circuit boilers, it is not necessary to come to the water supply. With this vrіzannya, the vikonati is the best to the cob of razgaluzhennia, closer to the booth.
Zdіysnyuyut priєdnannya to the gas main at the sight of a metal pipe.

Rules for the operation of gas cauldrons

First of all, one of the most important rules: the place for installing gas boilers in a private house must be dry.
It is necessary to ensure the protection of the heat exchanger in case of hit by a saw and wood, which will reduce its productivity.
To increase the vigor of the water, use the filter.
Regularly vikonuvat technical service. Robiti tse bazhano before the cob of the opalescent season, or if the wines run out.

Technical service

Pid hour technical service win like this:

Rechecking the ventilation system and becoming a flue.
Cleaning and washing of filters.
Washing all the systems with special miyuchimy ways, which effectively remove the difference in the deposit.
Checking the tightness of all parts and replacing worn parts.
Towel cleaning.

Additional rules for the operation and regular maintenance of boilers, to allow the reduction of the capital, that is, to increase the term of service to the unit.

Video of installing a gas boiler with your own hands

You have added a new gas boiler for a private booth and the time has come to take your place at the firebox. For whom you can hire a specialized firm or go to military service. Ale price of installation in the right place should be clearly hit on the hamant, if it is possible to make the process cheaper. So, deyakі operations may have the right to vikonuvat less licensed organizations, but only half of the work, you can solve it on your own. Here we are talking about those, how to install a gas boiler in a private booth from the cob to the end.

Why start?

Shards for the installation of a new gas and corrosive gas equipment will need to comply with the rules, then varto close all the works, as they require licenses, gas service:

The appearance of technical minds.
Development of project documentation.
Vikonuє roboti z priєdnannya to the main natural gas.

Other things you can do on your own. You need to take a back seat from the gas service technician for the installation of gas control. Get to know them or make a copy and request project documentation from them. If she is ready, you will need to wait at the gas service. No matter how you guess, this procedure is a pure formality, if the brigade arrives at your home and completes the installation of the gas boiler in the part of the connection to the heating main, about which a deed will be filed.

All that you need to lose is for you - tse vikonati obyazuvannya that connection to the scorching system, laying the electrical circuit. Here it is possible to save money, they are all working with their own hands, and for the help of well-known plumbers. The rest of the stage is the rest of the paperwork.

Tse lishe short description one of the possible algorithms for solving problems, but in fact, not everything is so simple, even if gas boilers are due to be installed in order regulatory powers, It is impossible to get familiar with them at the stage of choosing a heat generator.

Vimogi for boiler installation

We need to take all the help to the place where we are going to place the heat. Options like this:

kitchen;
a room in the middle of the booth, which adjoins to one of the outer walls of that maє window;
placement on the basement or basement version;
at the old arrivals.

In the kitchen, the standards for installation allow the expansion of a sub-logic or a real unit with a heat output of up to 60 kW. Equipped with indications from 60 to 150 kW can be installed in a nearby room on any version, and from 150 to 350 kW - only on the first basement version, near the doorway. When it is important to do the rozmirіv okremoї kіmnati or parts that arrive, the stench cannot be smaller, lower is prescribed in the regulations. The minimum normative height of such a room is 2.5 m for any tightness at the designated boundaries.

Note. The magnitude of thermal pressure, prescribed in the standards and which should be added to the boiler installation sinks, is the total pressure of all units at the boiler house, including for the consumption of the HWP.

For heat generators with a productivity of up to 150 kW, it is necessary to comply with the norms, the smallest requirement for the installation of a gas boiler is 15 m3, krіm tsgogo, per skin kW of water heating, up to 0.2 m3. As the total indicator of all units exceeds 150 kW, then the dimensions of the application are not standardized. Then, the rules are set safe operation boilers, zgіdno z yak treba vitrimati tekhnologichnі nі і svіti mіzh units і іnami kіmnati, stinks priymayutsya s mirkuvan zruchnostі slugovuvannya і access to sіkh systems kotelni. Rozmіri passing in pvіdpovidno to the rules are finished like this:

From the protruding part of the gas burner to the wall from the front side of the heat generator - not less than 1 m.
As it is written in the instructions for the operation of the unit that it is necessary to service it from the side or from the back, then it will be possible to observe the width of the passage 1.5 m, if there is no such record, but it is necessary to secure access to the other possession or the armature, then it is sufficient In other cases, the possibilities for installation are hung in the documents for the verification of the plant - the picker.
If it is planned to put 2 heat chambers in the firebox, then it’s not possible to place one of them on the opposite side of one, the shards will be able to provide enlightenment between the protruding parts of the palniks of at least 2 m.
It is not possible to lay anything through the passage at a height lower than 2 m.

For the kitchen, where it is allowed to place no more powerful fires (up to 60 kW), no more power is required before the installation of gas boilers. It’s more necessary to meet the standard for obsyagom, more guidance, and also to ensure re-exchange at the kilkost 3 times in 1 year. Dodatkovo it is necessary to give hot air for the mountain fire, yoga vitrata for the skin aggregate is included in technical characteristics. Tsey standard for all types of boiler houses.

Note. For heat generators from a closed chamber, the norms of installing gas boilers do not disturb the supply of the exhausted sum to the hearth, because the stench is taken away again without a hitch from the streets for the help of a coaxial chimney, which will be discussed below.

IN normative documents it is recommended to organize ventilation for the boiler in the kitchen for help draw shaft and tidal gates, vbudovanih at the entrance door. The passage of the grating line is also standardized, the area cannot be less than 0.025 m2. In the same way, it is possible to control the reverse exchange in the same furnaces. Difficulties with the supply of fresh air can be blamed on the basement or basement surfaces, not included, but for visibility technical minds It is necessary to install a special tidal fan.

At boiler houses, which are located on the first, basement version or in the suburbs, you need to open windows with a slope of at least 0.03 m2 per skin cubic meter of the room volume. Before the arrival of the house, the fires of the fireproof walls, which are surrounded by the foundation and the entrance doors, also hang. In addition, it is not possible to sporudzhuvaty on the front facade of the building, and at the hour of the building it is necessary to step into the nearest window or the door 1 m horizontally.

The next step is to indicate what is important for a gas boiler that has been wooden booth, Identical to the standards for rooms with other materials, so the rules for improving the boiler house are the same for all rooms.

Boiler installation robots

If the appropriate application has been selected and the project documentation has been drawn up, you can proceed to the manual installation of the heat generator on the plate. For whom you need a scheme for connecting a gas boiler to a private booth, as it may be present at the project. It shows the place of installation, access to all structures that are protected, and technical support until vikonannya robit.

Most of the installation of underground gas boilers will require the installation of a foundation. It is not necessary for bagats in the case of wines, for example, if there is a tightness in the application, and the weight of the unit is not overweighted by 50 kg. If the mass of possession is greater for the value, then it will be necessary to prepare the basis. For which it is necessary to screed the screed, pile up a pillow with crushed stone and resolutely tamp it down. Let's tie the mesh with reinforcement of a periodic profile with a diameter of 8 to 12 mm, lay it on a ready base and pour it with concrete.

In order to demonstrate the technology of installing gas boilers, to expand the foundation in terms of guilt by 50 mm, to increase the dimensions of the installation, and to make it protruding by 50-100 mm above the level of the screed in height. On the outside of the concrete slab, I will take from you less than 2 days, you need to take care of it during the planning work.

Then, on the foundation, put a fireworks gasket for asbestos or metal on the foundation and put a heat generator on it, adjusting the legs of the unit in such a way that you can see the horizontal line. After that, following the installation scheme of the gas boiler, get through to all engineering facilities, Crimean fire mains. The connection, as it was said above, is licensed by the organization.

In order to install a wall-mounted gas boiler in a private booth, it is not a foundation that is needed, but a stone foundation at a visible wall, which can show the power of the unit. There is a rosette ahead of it, which will show that the heat generator itself will move and the dimohid pipe will be removed. Then, for the help of a perforator, a sharp opening is drilled here, a metal sleeve is inserted into the yak.

In order to move a real gas boiler, there are no special folds. As soon as you see yourself in the kitchen in an apartment or a booth, it is necessary to get used to it when you enter the house of the furniture in the air, and then proceed to the process of fixing. Folding can be involved in the installation of important units, the intensity of which reaches 120 kW, here you can not do without a helper.

Note. If the overhead boiler is fixed to the wall, which is folded from the paling material, it is necessary to prepare a special bracket, which allows the expansion of the gap of 45 mm between the surface wall and the rear panel of the heater. Also, up to the wall, attach an arch from a non-combustible material, which plays the role of a protective screen.

In the rest of the house, the piping of the gas boiler and the attachment to the flue are fixed. Here, it is necessary to compactly place under the body of the heat generator taps and other fittings, so that everything looks neat and at the same time it is possible to expand or remember whether there is any element. To that, if the scorching scheme is broken into the booth polypropylene pipes, then taps and dirt are more beautiful than vikoristovuvat bronze, and plastic pipes come through threaded adapters. For whom it is necessary to install a double-circuit gas boiler, it will be necessary to lay pipes for the GWP and correctly connect them to the outlet pipes.

Vimogi do Dimariv

In fact, the flue gas ducts are identical to the smoke ducts and the wall-mounted gas boilers, the difference can be in the gas duct design itself. Tse to lie down in the building of the dzherel heat:

Heat generators with an open combustion chamber are taken repeatedly from the application and discharged by the products of scalding through a traditional dimar from natural draft.
The units, possessed by a closed chamber, are pulled out of the streets of the primus, behind the auxiliary fan through a double pipe, which at the same time serve as a gas duct (coaxial dimar).

The traditional dimar for a gas boiler is ruled by comrade's walls, or the call of life is raised. The span of the outlet pipe from the unit determines the diameter of the entire chimney, it is due to the same size, and more often by 20-50 mm more. Horizontal plot, which is behind the boiler with a smoke pipe, ideally, it should be 1 m long, the maximum allowed length is 2 m.

The lower part of the vzannya obov'yazkovo dvertsyat for cleaning and internal inspection, and the deaf end of the vertical pipe is secured by the system for pouring out condensate. When installing a gas boiler chimney, remember that it is not allowed to wind pipes with parasols, deflectors, wind vanes. Vіdpovіdno up to the normative it is possible to put only a sounding nozzle.

It is easier to install a double-walled dimochid for heat generators from a closed chamber more easily on the front of the traditional ventilation channels for the products of scalding. Zrobivshi at the outer wall opened required diameter and vbuduvavshi in a new metal sleeve, the installation of a coaxial chimney is carried out, which is a horizontal double-walled pipe of the singing duct. One mind, obov'yazkova until dotrimannya, - not a great one stole from Bik Dima. Vіn fight in order to prevent condensate, which settles in the inverted path, without zatіkav at the boiler.

Visnovok

Since then, after installation and tying the boiler with your own hands, it’s not easy, but it’s a whole lot of work. It will take a lot of time and patience to complete all the documentation, and the installation itself will take a maximum of 3-4 days, or even less. Here it is important to prepare well and in advance to add all the elements of the strapping scheme, as well as the details of the fastening.

Houses for appointments can be kept warm. Ways to grow yoga are so impersonal. However, the leather vlasnik is the most cost-effective and practical method. One of these options is the installation of a gas boiler. Searing with gas is visible and easy to finish in installation and operation. The connection of the fittings is carried out only fakhivtsi, but also the lining of the boiler room, the installation of the boiler is empty. you can spend it on your own, having spared the sum of your money.

The installation of a gas license, following the retrieval of the permit documents and the necessary weather. It is necessary to fix the project of gasification of the premises, the installation of gas control. The document is being circulated and confirmed by fakhivtsy from the gas supply company. Having become familiar with the project, you can proceed to the purchase of the necessary property, the main characteristics of which guilt are present in the document. In addition, the next step is to put an agreement on the supply of natural gas. After that, you can be engaged in the installation of the system without interruption.

Suitable location for the boiler

The gas cauldron is the head element of the opal system. For yoga installation, it is necessary to competently possess a place. There may be evidence of low suvorih vimog, damage to any of them, incurring significant penalties and provoking unfortunate vipadki with heavy insults. Gas is vibrationally unsafe, that combustible substance. We need to be careful with him.

Application, in which gaseous possessions are established, may be confirmed by the lower forces. The main characteristics of the room-boiler house are presented in the diagram

When choosing a place for the installation of a gas-fired boiler, it is necessary to protect the onset of the disease before use:

one of the walls is to blame for the possession of a channel for displaying combustion products;
obov'yazkova manifestation of natural vision. The minimum area of a window is covered by the following formula: per cubic meter of the volume of the room - 0.03 sq. meters of the top surface;
the height of the stele is less than 2.5 m;
planning, which ensures uninterrupted access to the boiler and additional possession;
the presence of ventilation gates, ruffled in the lower half of the wall or the door. The area of the construction is to be covered by the construction of 8 sq. m. see Cost per skin 1 kW boiler;
obsyag - at least 15 sq. m;
fire resistance of wall structures - not less than 0.75 years;
the presence of the gas analyzer and the reaction to the second signal of the automatic valve, which cuts off the supply of fire at the gas flow;
competently organized dimar, re-perezing any possible evidence of tightness of the possession;
the width of the doors is not guilty of becoming less than 80 cm.

It is necessary to remember that the installation of gas boilers with a power of less than 60 kW is allowed in any place, the Crimea is quiet, which is designated for living. It is also not recommended to install gas installations near bathrooms and bathrooms. Dvokonturnі prilada fenced montuvati at kitchens. Even though the total power is not higher than 150 kW, it can be put on any version of the day. Apply more tightness, you can roztashovuvatisya less than the first version of the plinth.

There is a lot of people who have the freedom to place gas in the kitchen. In this way, the norms, which regulate the installation of gas boilers, require the provision of the necessary minimum area, depending on the fact that at least 0.2 m 2 of space fell on 1 kW of pressure. Like the kitchen is pojdnana z vіtalneyu, obov'yazkovoy staє i nayavnіst gazoanіlіzatorа, yakim poєtiti poєtiti vіtіk vіtіk gaz.

As it allows the boiler to be exhausted, gas installations are often installed in the kitchen, as well as in the same time with the vitals. In my opinion, the presence of a gas analyzer is becoming an obov'azkovym foreign approach.

Technology for the installation of gas equipment

Since the installation of the boiler went without a hitch, the next time the purchase was made, and respect for the method of its installation. Slid reverify the complete set of accessories and z'yasuvat the presence of fastening. If you don’t know, it’s necessary to immediately buy the necessary. In addition, when buying, the possession of the obov'yazkovo verifies the presence of the new certificate. For the validity of the document, you can serious problems from registration. I will attach the characteristics and the serial number, applied on the inner door of the accessory, due to the correspondence with the statements, assigned to the passport.

Option # 1 - installing a sub-logic cauldron

First, lower, install a subdivision, next prepare for a new place. Let's get it right from the logs. Shards of possession can be great, the basis can be powerful. Possibly, it is necessary to fill in the screed. The subtext, on which the boiler is to be installed, is the responsibility of the Vikonan for the material with fire-fighting coatings. As it is not so, empty concrete blocks of 100 mm crowns are laid on top of the underlay, and the top is covered with a sheet of metal with a thickness of 0.8 mm. As an option, you can look at the vikoristanny of fire-fighting stoves, which are allowed for vikoristannya with a method.

The wall of the prilad is to be blamed for hanging on a width of less than 0.1 m, for the sake of understanding that the vikonane is covered with non-combustible materials. It is necessary to attach the attachment to the back, the wall may be fireproof. In this way, the insulation of the base of the covering steel is used, as it is superimposed on the asbestos sheet with a thickness of at least 0.3 cm. the wall is smaller by 1 m.

The possession is installed on the prepared basis as evenly as possible. For re-verification, the weekly rіven is victorious. If necessary, a non-combustible solid material will be attached. The boiler is connected to the chimney and internal scorching system. In order to prevent the heat exchanger from being dirty, a hard cleaning filter is installed in front of the return flow inlet. Like a double-circuit boiler, it is connected to a pipeline with cold water.

Underground gas boiler can be installed on a prepared basis. Underneath, if necessary, it is necessary to install the basis of non-combustible materials. The most empty concrete blocks with a height of 100 mm, covered with a sheet of metal.

Fahіvtsі recommend to carry out the installation of the boiler so that it can be easily dismantled. Locking valves are installed on all pipes brought to the fitting. The stench is allowed, if necessary, to dismantle the possession without the unbaggage removal of the drive from the operating system.

It is necessary to remember that the installation of gas cauldrons cannot be carried out with one's own hands. Obov'yazkovo is responsible for the request for certification of a specialist, who is to verify the correctness of the installation, which is necessary to come in and start the system.

Option #2 - connection of overhead installation

Proper installation of gas wall-mounted boilers is based on washing the inner tubes. With them, for an hour, folding a whole could spend a little more money, as it is necessary to see. For this accessory, it is necessary to use plugs during transportation and pass water through it with a small vice. After washing the possession, you are ready to install.

The wall, where it is planned to fix the attachment, may be more even and sufficient, to see the boiler and the accompanying attachment. As the base of the vikonan is made of combustible materials, a non-combustible gasket with a width of at least 3 mm is attached to it. In this case, the boiler will be fixed on a minimum width of 4.5 cm from the wall. The installation of the attachment is to be found on a width not smaller, lower than 20 cm in the case of other possessions or easy-to-grab materials. It is not recommended to place the boiler near a window or in a small wall opening. Dzherelo electricity may be located near the annex.

Attachment is fixed on the slats, to be fixed on the wall on the bazhan height. Call the wines to be within the boundaries of 0.8 to 1.6 meters from the logs. After fixing the annex, the horizontal of the installation is changed for additional support. All manifestations of inconsistencies are corrected, otherwise they can negatively affect the operation of the possession. There is a connection to the water supply. Plugs from branch pipes are removed before the cim of the obov'yazkovo. Put a filter on the water inlets, the heat exchanger will be less conspicuous.

All of them have been repeatedly told about those installations of gas boilers, like, in the meantime, those other gas appliances, may be carried out by certification of fahivtsy gas enterprises. Unfortunately, according to this rule, a lot of flooring companies raised prices for their services, so the quality of the installation can reach half of the quality of the very possession for an hour. And even though the certificate is needed only for work on the gas pipeline, and the installation of the boiler, water supply, heat transfer and electricity (like an energy storage attachment) do not require the annual special skills.

Prior to arrival, in which the installation of a gas boiler will be carried out, a number of suvorih vimog are presented, nevikonannya of which can be brought not only to significant penalties, but also to unfortunate vipadkiv. Remember that the gas is supra-lingually pale and vibuho-unsafe speech, so be careful with it.

Important! A single-circuit boiler with an output of up to 60 kW can be installed at any room. The installation of two-circuit cauldrons near the adjacent kitchen was fenced.

Application for possession, the total intensity of which does not exceed 150 kW, can be placed on any version of the day.

Important! Installed gas supply near the living quarters, bathrooms and sanitary facilities are fenced.

If you need to install a larger exhaust boiler or a small extension, exhaust from 150 kW to 350 kW, you can only work on the first or basement version. In addition, the installation of a scorching boiler in the kitchen draws after itself a change in the standards for the area of application - it is necessary to expand the premises, depending on the fact that for 1 kW of intensity, the fitting may be 0.2 m³.

Application of the boiler house is due to the mother of the following characteristics:

The height of the steles is not less than 2.5 m-code.
Comfortable access and maintenance of all accessories and additional equipment.
Volume - not less than 15 m³.
Between the fire resistance of the walls is not less than 0.75 years.
The norms for the installation of gas boilers provide access to natural lighting boilers.

Boiler house - a place for the installation of a scorching plant

Vіkno, the minimum area of which needs to be developed, depending on the fact that 0.03 m² of the area of the window can fall on 1m3 of total area.
Ventilation doors in the lower part of the doors or walls in the garden room. This area can be loosened according to the standard formula 8 cm²/1 kW of boiler pressure.
The width of the doors is not less than 80 cm.
The application of the gas analyzer has a valve that automatically cuts off the gas supply at the time of the turn.

Installation of a flue for a boiler

Another important element safe work gas obladnannya є dimar. Either wrong or wrong work can lead to tragedy. Luckily, most of the current opaluval control is equipped with automatics that apply gas supply to the chimney when the draft is reduced.

Connecting the boiler to the chimney is due to comply with all safety rules and, rather, entrust the work to professionals!

The main vimogi before Dimar:

The diameter of the chimney can not be smaller, the lower one is specified in the instructions before the boiler.
The chimney flute can not be smaller than the diameter of the chimney opening of the boiler.
Dimokhid is guilty of hanging over the conic dahu for at least a pivmeter.
For gas use, it is recommended to use dimar cylindrical shape, made of metal - black or stainless steel - with a cleaning opening.
Rules for the installation of gas boilers block the presence on the route of products in the mountains more than three turns or bending pipes, and the winder, which connects the chimney with a chimney, is not guilty of being over 25 cm.

Required documents

The first step is to proceed before the installation of gas control, it is necessary to take a number of permissive documents that weather. Nasampred, it is necessary to put an agreement on the supply of natural gas to the house and take the project of gasification of the future installation of gas supply, expansion and approval by practitioners of gas supply. Now you can proceed to the installation of the boiler and the installation of the scorch pipes (there is still no way).

Installation features of the wall-mounted option

Preparation before the installation of such a possession can be done at the stage of the first purchase. Obov'yazkovo invert the complete set of accessories, marvel at what elements of fastening enter to it. Yakscho nі, once again come їх.

Important! Buying a gas cauldron, change your mind, you are certified. Otherwise, you may have problems with registering the accessory.

Match the serial number and characteristics of the boiler, indicated in the supporting documents, with those, which are marked on the inner side of the door.

Butt of competent installation of a hanging cauldron in the kitchen

Before starting the installation of a wall-mounted gas boiler, it is necessary to wash all internal pipes. For whom you need to take the transport plugs and let the water through the pot under a small pressure. For an hour, stacking in tubes could take a little more smіtya, it is necessary to see it.

Wall, on the way you plan to build a boiler, may be made of non-combustible material. If your mood is not so, it is necessary to put on it a ball of heat-resistant coating of a grill not less than 3 mm, and fix the boiler on a stand 45 mm from the wall.

Now you can proceed to installation:

At a height of 0.8-1.6 m, the mounting strips are fixed, and before them the boiler. Let's revisit this roztashuvannya.

Important! The boiler is guilty of installations at a height of not less than 20 cm for other gas or electric appliances. In unbiased proximity, it is not to blame for easy-to-borrow materials.

It is necessary to install a filter on the supply pipe, which will help to prevent the heat exchanger from being noticed. By touching the sides of the filter, we will install the fittings. This is necessary in order to be able to replace or clean yoga without anger from the system.

It is possible to install a gas boiler chimney and check the traction effect (for this reason, the design of the fitting is taken into account). Most of the current suspended boilers lie down to the so-called “not dimochous”. To make the products of the mountain go for the help of a small fan. In this case, the presence of strong traction in dimari is not necessary.

Let's get down to connecting the gas. Axis here without the knowledge of specialists you can not do. On the right, in the fact that the supply of gas is allowed only from the stoppage of the metal pipe through a special fitting or "American".

The installation of real gas cauldrons is completed by the connection of the extension to the electric meter. As an energy-storing boiler, a lantern of life is guilty of being equipped with an automatic switch for overheating and short circuit.

Important! Remember that you open the gas valve and put the boiler into operation, you may not have the right to practice the gas state after checking the quality of the installation and the boiler’s reliability according to the relevant standards and rules.

How to install the boiler?

Such a possession, as a rule, becomes stronger for wall-mounted boilers and is used to burn a large area for scorching. Most often, the installation of a boiler in a private booth is due to the need to distribute heat on the surface of the sprat. I start all over again at the stage of purchase. When choosing a sub-logic boiler, it is important to clearly indicate the pipe lining at your boiler house. It is necessary for the fact that the boiler nozzles were on the same side, where the pipes were connected.

The butt of the installation of the boiler pіdlogi in the boiler room. Now the whole house is safe with hot water.

Vrahovyuchi dosit znachnu vіdlogovogo boiler, it is necessary to secure yogo mіtsnoy basis. Like a pіdloga at your boiler room of a tree, ale finish the mіtsna, pour a concrete screed under the boiler without obov'yazkovo. Finish laying a sheet of galvanized galvanized sheet, with a trochic expansion more for the base of the boiler. From the sides of the windows, you can expand with the dimensions of the annex, and from the front side, you can protrude less by 30 cm.

Do-it-yourself installation of the boiler requires respect for the reliability. Obov'yazkovo reversing yogo roztashuvannya equal and install as evenly as possible. For this purpose, one of the bottoms can be put on a hard non-combustible material, for example, pieces of a plastic line.

Connect the boiler to dimar, as if your attachment is not possessed by primus draft, turn the draft into dimar.

Connect the boiler to the internal combustion system. In front of the entrance of the return pipeline, and after the introduction for filling the system, install a hard cleaning filter. Tse dopomozhe zapobіgti pre-smіchennyu heat exchanger.

Features of connecting the boiler to the scorching system - click to upgrade

Double-circuit boiler krim vr_zannya in opal system vymagaє sche connection before the supply of cold water. Roblyachs vrіzku at the water for connection to the boiler, try, so that there was a yakomoga closer to the entrance, blow to the booth. Well, if you don’t see any reasons, then turn up the blow to blow the pipe. In this way, you will ensure the greatest pressure of cold water in the boiler and the uninterrupted supply of hot water. Now connect the hot water pipe to the outlet pipe.

Important! The installation of gas-fired boilers is guilty of being carried out in such a way that any moment of attachment can be easily removed. For those on the skin pipes, to enter or exit the boiler, the valves must be installed, so as to allow the boiler to be dismantled without removing the water from the scorching system. It is especially important for systems that work on chemically pure water.

There was no more connection to the cauldron to the gas pipeline. How and in the fall with a real boiler, it’s more necessary to work steel pipe. Opening the gas valve can only be done with the permission of a specialist, who will check the accuracy of the work and sign the act of putting the boiler into operation.

As a rule, dotrimuyuchis all able to install gas boilers, home masters can cope with the robot only for a few years. Another few days to go to check the inspector from Mіskgaz. And if the documents are signed, and the gas valve is cleared, you can enjoy the warmth and for the sake of good work and protect the cats.

Vlasniki zamіskoї neruhomostі often zmushenі virіshuvat nutritious improvement, with yakim not sticking city dwellers. Zocrema nourishing the organization of burning. Since it is possible to connect to the main gas pipeline, it is easy to solve the problem in a private booth. Let's look at how the installation of a gas cauldron can be seen.

Main element autonomous systems scorching is a boiler that works on gas. The robot is controlled automatically, when the sensor is activated, the burner is turned on. So that the infamous possession did not impede repairing the skin during the month and it was completely safe, it is necessary to know and follow the rules for installing a gas boiler.

Classification

The current market offers a wide range of gas scorching units with automatic (with variable sensor) and manual controls. Їх can be classified for dekіlkom signs:

Where can you put a cauldron in the booth?

The main principles for the installation of gas scorching equipment are formulated in regulatory documents. They can be known before the introduction into the booths of the gas main and the place in which it is planned to install the scorching unit.

Please! The main factors until the installation and operation of gas scorching units are due to be fully trimmed, in view of the safe deposit of baggers.

It is impossible to install a gas boiler with your own hands. It will be necessary to turn to fakhіvtsіv for the development of a full project, and the launch of the scorching system, possessed by a gas boiler, at a private booth is allowed only after that, as a special service, draw up an act of acceptance.

Choose a city

Choose a place, where you can install a scorching unit, deposit it according to the type of boiler. So, vikonannya units, the intensity of which exceeds 150 kW, is allowed to be installed in an insulated room, stashed on the lower (basement) version or in the basement. The main help before admission:

It is planned to install a wall-mounted gas boiler, however, before the adoption of a smaller one. Prote miste, in which to install a scorching unit at a private booth, you cannot choose for your bazhanny. Let's look at how it is possible to install a boiler in a hut, and we could get to the place of residence:

Zhitlovi kіmnati. This option is categorically unacceptable, but it can be clearly pointed out to those that the application of the installation may be unlivable, and the mind is categorically fenced to destroy.
Sanvuzol. As a rule, it is not a problem to install a scorching boiler near bathtubs. On the right, in the fact that you wash the microclimate in this place, it is rotten on automation systems and can lead to the failure of that chi of the other sensor, and the repair of electronics is not cheap.
Kitchen. When installing the unit with a power of up to 60 kW, it is not easy to install it in the kitchen.

Preparation stage

The first step is to proceed with the installation of a sub-logic or wall-mounted unit, it is necessary:

Indicated in SNiP, however, these are the parameters that must be trimmed during the installation process. So schob vikonati vymogi before the appointment, and sometimes it is necessary to carry out preparatory repairs.

Pristroy dimovidvennya

Non-authoritative mind robot and safe operation of a gas boiler - the presence of traction. Modern models of boilers are equipped with automatics, why, when the draft is lowered, the sensor is connected and the gas supply is applied.

When installing the unit with an atmospheric burner, to ensure traction, it is necessary to install an all-round dimoxide system and run a pipe to the outlets. If the unit is attached from a closed combustion chamber of a turbocharged type, then a coaxial dimochid is installed for normal draft, which is output through ovnishnyu wall.

Please! As a rule, the elements for the selection of a coaxial chimney are included in the kit with the boiler.

The main factors to dimary for ensuring good traction and stable operation of the boiler:

for closing normal draft and switching off the ingress of products of combustion gas into the room, it is important to keep it cool, so that the cut of the boiler's chimney pipe is not larger than the diameter of the chimney pipe;
dimar is to blame for the mother of a minimum of turns, so as a virgin to the channel of introduction of dima, lead to a decrease in thrust. Three more than three turns are allowed;
the reduction in draft is to be taken up and the long horizontal dilyanka of the dimar, the dovzhina of the dilyanka, which the rear unit with the chimney is not guilty of overhanging 25 cm;
when arguing dimar, it is necessary to transfer the presence of revisions to allow for repair and cleaning;
if the pipe is run on the dachas, then it is guilty of lifting no less than a pivmeter above the conic, only in that direction you can reach normal traction;
For the preparation of a chimney, it is better to use vikoristovuvat stainless steel, with vikoristan galvanizing, repair of a chimney requires 5-6 years of skin work.

Boiler installation

In addition, as soon as you know how to install the boiler, you can carry out the installation of the boiler.

Installed wall model

Robots go like this:

the boiler is to be fixed on an outer wall made of non-combustible material;

Please! Like a wooden wall, a fire pit is installed on it, and the boiler itself is mounted on brackets on a wall no less than 4 cm from the wall.

Installing a sub-logic unit

When installing a sub-log boiler, it is necessary to prepare a pedestal in front concrete screed, covered with steel sheet. The boiler itself is installed in such a way that the balance on all the supports is equal, the correctness of the installation is verified by equal. In case of nevikonannі tsієї wash the opalous obladnannyu nezabara repair is needed.

The installation is switched on before dimar, then the pipes of the internal scorching system are carried out. When installed double-circuit cauldron supply water. There is an electrical connection, including an emergency switch sensor. Arriving to the gas pipeline and launching is carried out by specialists.

Also, the installation of gas cauldrons is not easy on the right. It is important to correctly select the scorching unit, competently determine the place of installation, looking at all the possibilities of fire and gas safety. Vikonannya nayvіdpovidnіshoї ї ї robіt zdіysnyuієtsya spetsialistami, and in the installation of the connected boiler, in addition to the initial video