The design of the heat and water scorch. See the scorching fire

In apartments, rotting on the first surfaces of the houses, there is often not enough centralized scorching. In such a situation, there are additions, for example, such as a water heating system.

She can be vikonana dekilkom in ways and often finish the rest of the hour alone, like the main scorched.

What is a modern pidhid?

The water of the heat of the basement is built up to ensure a comfortable temperature in the room, with the same cover for the basement, it warms up only slightly. This type of regulation, having omitted the name thermostatic, to the fact that the heat-carrier in the system has a constant temperature, which is supported by a scorching boiler.
The connection of elements of heat supply to gas appliances can be connected through zmіshuvalno-regulative units or valves.

Today's scorching boilersє special vbudovaniy mode of water supply, heated up to 50 ° C, yogo connection to the system allows you to choose one of the most economical options for heating the room.

The presence of such a mode is compensated by the trichordial valve, for which the required temperature is set by a thermostat.

See the scorching fire

A modern heating system can be represented by three types:

• Betonnim
• Nastilnym
• Derev'yanim

The first one is a warm underlay with a concrete screed. For this placement, it is necessary to carry out the expansion of the screed in front of it with the expansion of the screed when heated. At the next stage, laying of thermal insulation is being installed, most of all, pinolex or penopolistirol plays this role.

Її recognition - all the warmth of the host, not allowing it to go through the overlap of the lower surfaces. Then we need to draw the line of laying the damper line, as it is necessary to compensate for the expansion of the screed when heated. Next, a mesh is laid, prepared from fittings, necessary for fixing pipes to the contour. І at the rest of the stage, the construction is filled with concrete stitch.

Floor variant and yoga pvid

Particularly for the type of water scorching, the sublogs are those that can be installed without a screed. In case of yoga glazing, the covers are placed on aluminum plates. Between them and a flat spacer, a spacer ball is placed, either with cardboard or with polyethylene backing.

Knowing the current flooring system of heat and water, it is necessary to know the congestion at the premises, which may be surrounded by height and weak overlapping slabs.

For the correct vikonannya, additional thermal insulation is necessary, polystyrene mats are laid on top of the animal. Then they have heat-insulated aluminum plates, on which pipes of contours are placed.

The final ball is a semi-dry coat, it is laid on top of the structure without blocking the screed. The type of this system can be called a polystyrene version of laying the water scorching system. Let's take a look at yoga and the shortcomings.

Polystyrene system for water heating In the basis there are elements of the material, on some kind of vikonan grooves, they fit heat-spreading plates and then pipes.

Її zastosovuyut at the peaks, if you are attached concrete screed impossible for low reasons. Vaughn is universal in laying and can be mounted on concrete or black underlay, which can be found on wooden logs.

Mounting option from the installation of wooden elements

This species is best known to stagnate at shield booths.

Vin can be:

• modular
• Reykovim

The first type is to place at your warehouse special chipboard panels to make channels for laying pipes. A rake variant of foundations for laying heat-conducting plates and a singed contour, which are drawn with chipboards with a width of 15 to 30 cm.

The stench is fastened to the base behind additional screws, with a gap between them of 2 cm.

In the spaces between the slabs, aluminum plates are laid, as if they were reinforced with a ball of cardboard or backed polyethylene. And then the installation of pipes is going on, and the whole pie is screwed up to the beast for substitution.

Most often, it is located in a complex with a black wooden underlay, laid on the logs. This is the ideal solution for the additional contour of the scorching for the shield selected booths.

We’ll forgive you for food, but it’s hard to get it right for a new one. At this stage, there is a sprinkling of water, warm water and leather from them, we can see the singing minds.

For example, for fashionable modern wooden or shield houses, in which the construction itself can be on the verge of stowing natural materials, you can’t go about a concrete screed there. Also, for such budіvel, the best option would be a flooring system with a water bed.

It’s easy to finish it, but at the same time it warms up warmly and realizes that the singing world is not enough. Ale, at the same time, it fits easily and quickly, and inexpensively. In this rank, for shield houses, it’s just an ideal option.

Another is a polystyrene system, a good solution for wooden underlays. The power can be up to 45 watts per square meter and є additional additions to the main system.

The third is concrete. The main її advantage is the accumulation of heat, which achieves such a condition for two more days. On the new one, you can lay it down, whether it’s a cover for a pidlog, so to speak on it is melancholy.

Wine cost is more expensive than two previous models, but it is indispensable for capital life. Looking at the peculiarities of the skin appearance, you can easily turn the vines on the melancholy of one of them, fallowly in view of the features of your accommodation.

And all the same, what is the warmth of a good friend?

Unequivocal confirmation of food chain no. Skin from seeing my own advances and shortcomings. shobbiti correct choice it is necessary to focus on the specifics of the design of your booth and the benefits to the operation of the system itself. Having only analyzed all the current data, you can make the right choice, under which your application will be consistent with all the powers that hang to the ground.

In case of obov'yazkovo, it is necessary to insure not less technical characteristics the heating system itself, ale and її design features, zocrema vaga skin vision. Therefore, the option for a concrete screed, although it is one of the most economically viable, is not suitable for use with weak overlaps.

Another aspect is the fact that its dismantling and further repairs are practically impossible, therefore, special respect is given to this varto and for the components, for which wines are accumulated. Only in any weather you can take into account the design of the warm weather and the comfortable temperature at the booth.

The heat of the sublog is the system of scorching, as it heats the houses from below. The widest type of heat inputs: electric and water.

See the water heat

The current market of opalizing systems of representations of trioma species:

Classic model

The classic water heat of the pipeline is turned into a house for an additional pipe system, in which the circulating heat-carrying fluid is water or ethylene glycol. Nosії are heated at the cauldron or from the system of central scorching.

The classic model is installed in most of the modern galuzias of everyday life: children's cottages, okremі apartments, richly overhead budіvlі, cottages, trade shops, sports complexes and navit stadiums.

Do-it-yourself water heater

Such a wide breadth of the classical system is explained by its universality: it is easy to install a booth in front of the cob of everyday life, so it is already a starred booth. Of course, it is free to connect to completely autonomous scorching systems and heating plants, no matter how class.

Design features of the water heater (classic model):

Types of classic warm tips:

It is recommended to install a water heater on the basis of a polystyrene system only for singing minds: in rooms with very low beds, in a booth with weak underlays, in some normative measures, the overlap is not allowed for an additional concrete structure; there is no possibility to organize a concrete screed - mix concrete independently or bring yoga; under the hour of redevelopment of the old scorch construction.

Technology of laying water heat pipes in polystyrene boards

Let's take a look, yakі є at vodnoї teploї podlogi strengths:

The water of the heat of the sublog may have a number of shortcomings:

• The classical model cannot be installed at the richly overhead booths due to the risk of flooding the vessels;
• Also, the classic model does not have regulators of the tension of the scorching. That is why people often have to regulate pіdіgіv at the booth navmannya, giving less or more fire;
• The risk of flooding is to blame, if you don’t go in for an hour, you can see the damage to the pipeline.

Electric water heat supply

Vіdminnoy rice opaluvalnoy system є those that stench is not connected to the boiler, shards of the element, which is grіє, are found in the piping system itself. For the functioning of the electrical sub-logs, they also do not need circulation pumps, the shards of the country do not walk through the pipes, but stand on the floor, heating up in the form of elements that heat.

Another special feature of electric and water heating systems are those that stinks are supplied from the already chosen one - with elements that heat, and a special core in the middle of the pipes.

Third singularity є їх high rіven autonomy and an easy operation process - the device is connected to a minimum of 220 V, and immediately begins to heat up the house. Krym tsgogo, so see the heating pads are equipped with sensors for automatic temperature control, so that the heating of the room is regulated independently.

Electricity benefits:

• Vykoristovuyut the minimum volume of rіdini, which is heated;
• Pipes are fired step by step according to all dates. Tsya technology ensures good heating of the whole room, and not the same old houses, as it is possible to watch for classic water jackets;
• Gnuchki nalashtuvannya and local pіdіgrіv. So, you can work by heating a nearby electrical circuit.

The homeland of heat under the log (the stink of electric water) can be installed in the apartments with rich overhead booths. Significantly: the classic water supply can not be installed in the richly-surfaced booths due to the risk of flooding the vessels.

Flooring system for water heating

Wooden construction (be it modular or rake). The water supply system of this type is installed on the logs, among which there is a heat-insulating ball made of mineral wool, squeezing and other materials.

Concrete and dry decking system

The main feature of the flooring system is the presence of a wet process, which means that the hour of installation is fast. The power of warmth under this type is broken up in such a way that it can be beaten up immediately after laying.

Another aspect is the availability of the sale of ready-made elements - insulation with grooves or bobbins, insertion plates, vikoristannya of which are positively signified on the security of laying pidlogs. The third aspect of the rice flooring system is that it heats up quickly and achieves it.

Krіm tsogo, pіdloga is not allowed for installation on top of itself of cough, stone and other important materials, the mass and comradeship of which are important for heating the living quarters. It is allowed to use only wooden materials and linoleum, so that it is easy to cover for pidlog.

Shari of the flooring system and warm underlays (burn to the bottom):

If you choose to organize heating on your own, then it is necessary to protect one feature of the floor heating system: not all pipes are suitable for laying in the mother. Choose trumpets with special covers, like zapobіgaє squeak pіdlogi. Also, follow the next step to the choice tax cover– it is recommended to choose simple and light materials such as laminate, linoleum or carpet.

Yakіy sistemy fahіvtsі vіddayut perevagu

We have been told that they are using water heating systems, now they have lost their significance, which one is better to install yourself at your booth?

Control unit - the heart and brain of the capillary system

Today, the great broadening of the shields abo wooden houses. It is obvious that it is not possible to move a concrete screed into such a booth. Also, for such budіvel it would be better to vikoristovuvat the flooring system of the water supply for three reasons: it is cheap, it is easy to install and it is practically not necessary to repair the pressure on the water supply.

So you see a warm padding, like a polystyrene system, vvazhayutsya vіdminnymi solutions for wooden pads. The average intensity of such a heating system is 45 watts/m². It was quite enough for you to have enough tightness, so that you felt comfortable in your booth to wind a fierce winter.

The concrete system is the best for the electrical sub-log for such parameters: it will last a few days, which allows you to save on scorched heat. Also, you can put furniture on the concrete bed and lay it down, whether it’s under cover. The main shortfall of the concrete system is the high varity of the installation, so it’s easier to install it under the hour of the installation. overhaul and less in private booths.

Fahіvtsі recommend to choose vibiraty all the same more prosutі - elektro-vodyanі pіdlogi, skіlki stink quickly installed, better heat the application and it's easier to repair. However, the most important kind of scorching does not always go through the intestines of simple sacks. The variability of electric and water supply varies in the region of 1200-1600 rubles/m².

Video: Water heating systems

Secrets of exaltation of pain in the snowdrifts from our fast reader.

Good day!

My name is Genady Oleksiyovich. I am a baker with over 20 years of experience. I am engaged in both repair and life of Russian stoves and fireplaces. Start the work of the vikona even more so relatively, which is negatively signified on the camp of suglobiv. For a century of pain, all the strongest began to suffer, even to the point of becoming, if I have not yet been able to heal. Having tried bezlich like medication so i folk ways exuberantly, I understand, seriously, my illness is serious, so there was no positive effect. Until I stumbled upon one zasіb, about which I want to tell you.

This is a unique summish of rare and strained natural healing speeches. Tsey zasib brought its effectiveness not only to patients, but to science, as I knew yoga divin drug. Pain in the swamps and back goes away in 10-15 days, as studies have shown. Golovne clearly dorimuvatisya vkazіvok at the methodology. Please save in the original packaging, with a guarantee of quality, you can

To achieve comfort in the middle of the accommodation, there is a lot of someone in the quality of the opalescent system, which will allow you to warm pіdlogam. Povna vіdmova vіd іdіаtої system аlє allows rational vikoristovuvat thermal energy, and also rіvnomіrno scorch the whole living area. Today, the technology of warm water flooring has been expanded, so that it is possible to install leather fahivets-pochatkіvets. Do not varto lakatisya vsіh robit. From your side, it is necessary to resolutely rozіbratisya z tim, like a mustache pratsyuє. More than that, it is important to understand, in such a sequence it is necessary to put the scorched pidlogs. Zavdyaks to whom you can turn yourself into a robot independently. An important role is played by the correct connection of the water heater to the scorching system. In this article, we will tell you about all the peculiarities of the creation of water warm conditions. So we’ll start from the very cob.

The water heat of the pidlog - what is it

The essence of this heating is up to the fact that a contour is laid in the screed, which is heated. The heat carrier is collapsing along the pipe laying. The heat-carrying rozpod_lyaєtsya on a sprat of various contours. Mustache circuits are united at the collector. Zavdyaki tsіy system can reach the fact that all sublogs will have one stable temperature. І zovsіm not varto lakatisya the one that laying the water warm underlay, cerezikovan on the right. Today, there are few technologies that allow all the work to be done at the highest level. The scorching system may be switched off again. The only thing that can provoke the appearance is the lack of technology during installation. In order not to destroy anything, we will tell you, step by step, to look at the whole scorching pie of the water warm podlogs, as if it’s right to work it out on the nuances of taking respect.

What is required for robots

It is important for us to know what material you need from the robot. It is especially significant that with your purchases, give priority more quickly let the pickers know. And on the market, there were few products that were cheap. Also, in the middle of the day, you will need the next set of materials:

• Thermal insulation In this role, a large number of materials can play, for example, expanded polystyrene, polystyrene, mineral wool and others.
• Foil cover.
• Damper line. Good, like this line to the mother, to self-adhesive.
• Reinforcing grid. Vaughn is necessary for reinforcing the screed underlay.
• Pipe for folding to the singed contour. Like a pipe, it is possible to vikoristovuvat zshity polyethylene or metal-plastic.
• Special fastening for pipes.
• Collector and all components.
• Must-have storage elements for pouring the screed.

For the obviousness of everything necessary, you can realize the warmth of the water with your own hands.

Surface preparation for water heat

The system of heat and water supply can be used for preparation of underlayment. The most foldable and laborious stage of work. Perhaps you need to dismantle the entire underwriting cover. For example, as if a screed was poured on the underside, change into a screed. Yakshcho, tapping on it a little empty sound, there is a pіdlyagaє pіdlyagaє dismantling. Moreover, if the screed is uneven, then it is important to correct it.

Important! For the installation of a warm water supply, it is practical for all types of waterways to remove the old screed and fill in the new one. Why? On the right, in the fact that the infamous pie of the water is warm, the fodder is equally great. As soon as you start laying heat insulation, a pipe and a screed for the beast of a flooded screed, the height of the place can significantly shorten.

It is necessary for any type of person to prepare an ideally clean cover for the podlogs. Without intermediary before pouring the screed, hydro-insulation works are carried out. At її roles can act different materials, for example, rolled waterproofing, coated thinly. A damper line is laid along the perimeter of the walls of the obov'yazkovo, so as to increase the temperature expansion of the screed.

After laying the waterproofing ball, fill in the black screed after the equal. In order to make the whole system efficient and effective, you need to put in place a heat-insulating ball. Tse allow you to heat not a slab of overlap, but a ground, as if you are bagging in a private booth, but an accommodation. The technology of insulation can be applied on the basis of the use of sprat methods:

1. If the heat of the water bed is to fight in a private booth on the first version, then it is recommended to beat the leaves of the styrofoam of the curtain up to 100 mm. Expanded clay sags in front. Like a trace of work and in that fall, as if under the first top of the bed, so you don’t scorch.
2. If you live in an apartment and the heat of the water is to work in it, then the heat insulation can reach up to 50 mm.
3. As a system of water and heat underlays, it will be victorious as an addition to the main heating system, it is enough to lay under the basis of foil insulation.

Modern technologies allow you to significantly ask for the preparation of warm applications. For example, a flooring system of water heating and plumbing allows you to speed up the installation work at a time. The flooring systems, which are victorious, have special channels for laying pipes. More than that, the floor mothers make a heat insulation ball. Mіzh themselves stench zadnuyutsya spetsіalnymi spolukami.

Vibir trumpet

The heat of the podloga zdijsnyuє its work zavdyaka laid down the contour of the pipes. It is also important for him to turn them correctly. Today, a pipe made of sewn polyethylene, as well as metal-plastic, is becoming very popular. The diameter of the pipe determines the design of the water heating system. It is important to win the diameter of 16 to 20 mm. It is important to vrahuvat, scho trumpet the bellows and pay the maximum working vice up to 10 Atm.

Collector system

An important role is played by the system of water heating and sub-logs of the collector. A control panel of its own kind, which evenly distributes heat flows along all scorching circuits. The collector is installed at a special closet. The chosen place can be handy for the victoring of quiet chi and others.

Under the collector itself, there is a special metal pipe on the edge, in which there is a large number of nozzles. The leather branch pipe and the circuit on the collector are equipped with locking valves. Two metal tubes are victorious. One part of the collector takes all the pipes from itself with the supply of heat, and the other part is wrapped. Plus, the collector group is to blame for turning on the valve. Zavdyaki tsoma can be thrown off again from the system. For which the collector itself is installed higher than the price of the pipe laid. In another case, the check valve robot will be incorrect.

Plus, before everything else, there can be a zmіshuvalny vuzol pіdmіsu, which is composed of a triway or two-way valve. A circulation pump is installed, which ensures a safe and even distribution of hot heat in all circuits at once. Moreover, a thermostat, an electromechanical servo drive and other extensions are installed. Everything is necessary in order to automate as much as possible the work and heat inputs and you have ever had to get involved in this work.

Rozrahunok trumpet

Vkray importantly correctly sound the roar of the trumpet. Even if you see it without any middle ground, you can effectively increase the heating of the state. More than that, in the case of the skin okremіshchennі rozrahunok dovzhiny that chіnshoy contour may be different. According to the established rules, it is not the duty of the contour to exceed 100 meters. However, this is the maximum display. For example, if the area of ​​​​application means laying 120 meters of pipes, then break it into two circuits of 60 meters each. Zavdyaki tsyomu, the whole system that you have broken up is not practical in advancement. In case of repayment of obov'yazkovo, insure the following important parameters:

• Water temperature.
• Diameter and material of pipes.
• The nature of the finish coat.
• What material is victorious for thermal insulation?
• Like heat, spend it through the walls, windows and doors.
• Linear rozmіri of that chi іnshhogo pom_schennya.

Zavdyaki tsoma, you can name, what kind of dozhina can be the opal contour. Also on її kіlkіst vplivatime і krok between pipes.

Scheme and method of laying pipes

When designing a water heating system, an important role is played by how the pipe itself is laid. An important role is played by the way of fixing the pipe. Today's їх є kіlka ways. For example, you can beat a special profile with sockets for laying pipes in them. The color profiles to the pidlogs are fixed with dowels. Zavdyaki tsyom krok laying pipes is also easy to control. It is also possible to vicorate special mothers with beans. Even if the stench is not for you, then on the underlay, heat-insulating mats with a foil surface are easily laid. An armored mesh is laid on top. The pipe to it is fastened behind the help of nylon puffs. Also, there are plastic clamps, which are inserted directly into the heat-insulating mat.

Important! Remember, it is important to choose the method of fixing the trumpet, which will ensure the proper fixation. It’s not necessary, even if the screed is poured, it’s not your fault to do anything. Moreover, the contour can be more equal.

Keep in mind that when forming the contour, the pipe is not allowed to stick. The contour is to be formed from one pipe. Tsgogo reach duzhe simply. Take a bay of trumpets and one end you will come to the one wrapped in the collector. Stepwise unrolling the bay with a pipe and laying it with a song croc. Turning back, connect the other end of the circuit before filing.

If it is worth rozrahunka to the contour, then when laying a few contours at different rooms, it can be different. Moreover, it is efficient to divide one room into a sprat of circuits. Zavdyaki tsomu efficiency of heating increases at the spawn of times.

An important role is played by those who behave properly with the pipe. It is unacceptably strong її zginati. It is important to pay attention to the fracture of the pipe. In another moment, you can bring water to a boil. If the pipe will pass through the wall, then place it in the back of the back of the polyethylene.

Important! To connect the scorching circuit to the collector, special fittings are installed. The stench mayut buti high vigor.

I will respect the varto to add the pipe laying scheme. In the form of the chosen scheme, to deposit and heat up all the areas of the sublogs. Today, there are a few such schemes for laying warm water pipes:

• spiral.
• Snake.
• Suspended spiral.

The widest scheme is a rablik. Zavdyaki tsomu can evenly warm up the entire area of ​​​​the scorching application. When її vikoristanny pipe with the supply, that return line is drawn.

Screed preparation

Since, as you have already laid the heat insulation and pipes, you can proceed to the final stage of the work - pouring the screed of the pidlog. Before pouring the screed, it is unacceptable that the heat of the water supply is turned on. At the same time, the entire system of warm water supply is turned forward. For this, remind the system of heat transfer under pressure up to 5 atmospheres. Leave її for production. As soon as the time is over, the vice has not fallen, then everything is good, you can prepare for pouring the screed.

For yakіsnogo pouring screed you need to install beacons. Zavdyaki tsomu screed warm up evenly. An important role is played by the appointment of the comradeship of the screed for water heat under the water. What is planned laying ceramic tiles The thickness of the screed can be close to 50 mm. If the animal is to be laid down with a laminate, otherwise it is better to cover, then the company will be richer with less.

Also, in the be-like vipadka of the beast of laying pipes, an armored net is laid. From above, beacons are installed behind the river. At preparations concrete obov'yazkovo add a plasticizer, which will give the screeds the necessary plasticity and stability when heated.

The process of pouring the screed must be completed at one time. In case of this, follow it, so that the screed does not have swollen intestines. In the other case, you will negatively add to the whole process of warming up the sub-logs.

Important! If the screed is completely flooded, it is not possible to turn on the heat of the underlay for hanging. The host may have the maximum natural temperature.

Call for a drying period that is close to one month. Only after that you can turn on the singed sublogs. Moreover, if tiles are laid on the underlay, then the water underlay is not guilty of being warm. Tile adhesive is liable to dry itself. As soon as the laminate is installed, the heating can be turned on once.

Visnovok

Let me take a look at the features of the water heating system. Yak bachimo, chya opium system includes a number of technological processes. I’m convinced that you are looking forward to these recommendations and pleasures, then you will be able to get into the hands of robots with your own hands. Crazy, the robotic process is viable, but completely bugged. In order to close the whole given theory, we invite you to look over the familiar video material, which will show you the process of the water heating system. If you already have an agreement with your robot, write your comments to the article. Your message will be invaluable for the great number of domestic minds, who want to make all the work with their own hands. We spodіvaєmosya, that all the material has given you a corisnu їzhu for reflection.