Connecting the power cable to the booth. AVT - aluminum wires with PVC insulation on a steel cable that you carry. About the main methods of introduction
In our time, it is important to show whether or not a spore is without electricity. Vono is necessary for everyone. Find the smallest application, as it is not often victorious, it will require electricity.
Otrimannya permit for the supply of electricity
The supply of electricity to the booth transmits the top of the offensive power:
1. The first thing you need to do is turn around to an energy supply company, with your passport and documents with you, which will establish the rights to budova. As soon as the house is new and put into operation, it is necessary for the mother to let her work passport go to work.
2. Vrakhovyuchi cubature booth and kіlkіst transferring electrical appliances, You are guilty necessary tightness spozhivannya, schobit technical mind for connecting the booth to the electricity. It is also necessary to think about what kind of victors you will energy saving lamps otherwise you will lose your faith special lamps rozzharyuvannya, you plan to put spotlights, lighters on the lot. It is also important to deplete some kind of reserve of tightness, the shards of electricity and light are often reworked, supplemented with various new attachments, and electricians can be used on them at all times.
3. As a matter of fact, the company's favourites have praised your difficulty and signed your application, write a request for the preparation of a connection to the project technical minds and go back to the customer service center. Tsya robot will be vikonan for one or two months (deposit in the region).
4. The installation of electricity to the booth may be carried out by electricians, as a license to carry out such work.
Necessary materials for the supply of electricity
- Corrugated pipe (plastic and metal) or vinyl box.
- Ankerniy hook.
- Electrician.
- Zatyskachi.
After that, as the lichil is installed and the electricity is supplied, you should call representatives of the energy company, how to put the act of putting the elektrolilichnik into operation and seal it. With the withdrawal of the act, you lay down an agreement on the supply of electricity to the supplier of the work with customers.
The process of bringing electricity to the booth
For zvnіshny wiring fakhіvtsі recommend zastosovuvati medniy drіt from underfloor insulation (PVC brand type). However, buying such a wire, it will help you to get frosty. It’s up to you to do it high, so that the insulation is destroyed due to low winter temperatures (superior PVC in a frosty winter becomes even more tenditnim and sagging).
As if the cable with gum insulation is twisted, it should be wrapped around the shade (from the pivnichny side of the booth), so that the sleeper will change to hang the gum winding and call out crying.
The electrical wiring is laid in a vinyl box or a corrugated pipe (plastic or metal).
Introduce the needle into the wake of life through the metal sleeve. For zashparovuvannya schіlin vikoristovuyut montage pin or mastic.
Power supply up to zamіskom booth, as a rule, robbing with a single-core dart. The minimum area to cut through the dart is about four square millimeters. You can also buy other services, even if you plan to increase the quantity by the hour butovy electric appliances at the zamіsky booth.
Yakscho vrahuvati, scho is small dacha house If you save close to 15-20 A of the stream, then the power will be reduced to 3.3 kW (15 A multiplied by 220 V and 3.3 kW).
Electricity has long and mіtsno gone into the life of a skin person and now it's easier. Therefore, it is often necessary to supply such a supply, like bringing electricity to the booth. For the connection to the electrics of the new booth and the dachas, they were allowed to do so, which are seen by the organization that is engaged in the energy supply of that chi іnshoy district.
Practically vikonannya robіt zdіysnyuєtsya, as a rule, fahivtsy z ієї organіzatsії. Nadali, for the exploitation of the merezhi vіdpovіdatime vlasnik budinka chi dacha.
Vіdvedennya merezhі for podklyuchennya sound taken from the support of power transmission, scho know closer to the booth or dіlyanki. This procedure can be modified in a different way.
Checking the way to the cable
With the repeated connection method, the cable is brought in repeatedly, starting and finishing, as the calls are being made. In some cases, it is possible to pass through the wall of the booth to the shield, ripped at the inner edge.
In this way, the flow of negative weather minds is passed. For example, darts with insulation made of PVC, when exposed to low temperatures, get cold and brittle, coming to the same inapplicability even in the first winter. I, navpaki, humova insulation is not afraid of frost, not to love direct exposure sonyachnye promenіv, vіd vplyu kakikh vykhne that dries up. Therefore, all factors need to be insured when choosing a place for laying wires.
Transitional method of delivery
Even more often the trench method is victorious, when for laying the cable the trench is vikopan, which passes through the support to the booth. In this way, the cable can be underpinned by insulation and placed in a metal pipe, after which the veins are buried.
Offending ways to make a lot of money and shortcomings. With the repeated method, it is easier to control the cable mill and fix it. However, wine is constantly aware of the negative influx of different weather minds. The trench method ensures the cable longevity and durability. Tim is no less, such a cable will require more than an hour.
The main umovoy yakіsnogo pіdvedennya elektriki to budinku є vіdsutnіst twists, rations and groschen at the cable on the whole stretch.
The minimum cable cut may be: for copper - 2.5 mm.kv, and for aluminum - 4.0 mm.kv. Buying the cable, create a small reserve.
When passing the cable along the wall, it is necessary to shove at the vinyl box or corrugated plastic pipe.
In this way, as if the supply of electricity to the booth is correct, and also for the completion of all the rules, the wiring will last a long time, and ensure that the supply of electricity to the booth is safe.
How to connect the electrician to the stovpa
It is not possible to install electrical wiring in an individual cottage without having the electricity installed before the wake-up call. In Russia, there are two ways of laying live cables: overhead and underground. When choosing the optimal option, the following features should be considered, such as the place for the distribution of power transmission lines, distance from the booth, the height of the cottage, the point of introduction of living to the home.
About the main methods of introduction
In most cases, the connection of the house of youth to the electric power line is turned by a path to the nearest support of the power transmission line through the outside wall of the building. With which method of laying cables, life can be:
Let's take a look
Such a way is even more popular, because it exudes simplicity and economy. If you repeat the introduction, there may be some shortcomings: the possibility of a damaged cable (wind, snow, trees), damage to the aesthetics of the facade of life, not even a long-term term for the exploitation of the line.
Underground (abo trench)
The methodology is less required, but the stones are expensive and will require no labor costs. Up to the pluses of technology to bring: saving privatility sane looking budіvlі, trіvaliy termіn ekspluatatsії іnії (zavdyaki іkvіdatsії threats for the integrity of the cable).
How will the government restore the power supply line?
Vibrating your own way, the vlasnik of the booth is guilty of remembrance, that you could stand up to the stovp of the LEP may be more than 25 m. In a different way, the wires are loaded with significant stress when strong wind, sticking snow and ing. Іsnuє a number of possibilities for the vykonannya of such an introduction - for help:
AVT - aluminum wires with PVC insulation on a steel cable that you carry;
APV - aluminum insulated darts;
SIP - self-supporting insulated wire.
From the introduction of options fakhivtsi to please the winners of the choice on the rest. And here I will lay the communication characterizing the visibility of the dovgovichnost. In addition, when laying, it is not necessary to add an additional structure to the cable that looks like it is carrying a cable.
It is necessary to know what the height of the cable is according to the standards, what to put over the passage for transport costs, it is to become 6 m and more. There is also a lesser path for walkers below, the value can be reduced to 3.5 m. In addition, the wires attached to the insulators on the booth can be hung at a height of 2.75 m (and more) above the ground.
The oscillating methods of introducing electricity do not include the possibility of shaving wires; high voltage in measure. The next thing to remember is that when "zero" is cut, the interphase voltage is significantly increased (up to 380V), with which standard automatics do not work (the stench "catch" is less important, which will override the admissible voltage). Protect the electrical equipment at the right station to help the presence of a special protection against the tension at the rosy shield.
About the specifics of the lining of the underground power line
Tsey variant sound the broadcaster power cable from armored shell. The rest is laid at the trench with a depth of 0.8 m on a sleeping pillow, which can be 0.2 m thick. Then we attach the cable with such a ball to the pipe. After a distant sipan of the trench with soil at a height of 0.4-0.5 m, a signal line is laid, which is ahead of the cable near the ground. After the end of tsikh robit zapovnyuyut viїmka, scho lost, to the brim.
In addition, in such valleys, it is necessary to prepare the laying of the house in the wall of the booth and the wall of the LEP. At these places, the cable is laid at the metal pipe, as it is often found in the ground. Introduction to life is carried out at a height of 1.8 m above the ground.
What did you give?
It is important to remember that by stretching all the lines in the support of the power transmission line to introductory annex at the booths, the cable is guilty of buti cіlnim (do not grow up, twist or ration). Under the hour of the holding of the yogic crisis, the walls will sound vicorous zahisnі casings (plastic and metal tubes). In times of subterranean electric power lines, it will be optimal to lay the cable in the wall in the same pipe, which is recognized for the introduction of the earth’s energy supply.
Carrying out the inside of the cottage, the cable is connected to the sub-panel shield, in which the presence is transmitted automatic vimics, busbars grounded and grounded, attached zahisnogo inclusion and so far. Potіm vroblyayut divorce internal mesh. Molding of the safe electrical installations of the zamіs'kogo domovolodіnnya is a worker and a serious worker on the right, that's why it's bad enough that qualified specialists were engaged in it.
Discuss on the forum (comments 21).
pat write:
Good day! Chi є on the forums professional electricians, Chi ti, who is good in whom? Can anyone suggest how it would be more correct to connect to the already established line. It was lightly carried out to the cottage, if there was no rose at home yet. the shield was installed at the garage. After that, two phases of three, were put in a bottle and turned on the light, heating sockets, etc. Now it has become power to turn on the houses to fix the one that is left with less than one phase in the bottle? Through the rozpodіlnі zatiskаі without intermediary vіd sip or vіd vhіdny vimk. (The chervonim is visible in the photo). At the booths, it will start up again, but at the booth at the HDPE pipe.
We took electrical goods in my online store in Moscow www.elektrika220.ru.
The booth will have its own rose shield.
Thank goodness Andriy.
how did you turn on the electricity?
