Service personnel are allowed to work at the work station, who have learned and re-verified knowledge for visits and safety rules, which are included in operational and regulatory and technical documents, medical look that may be consecrated to the right of independent work.

When vikonannі robіt nebhіdno zastosovuvati іndivіdualnogo zahistu: ______________________________________________

Before carrying out, be some hot work on a container, which can take revenge on an easily occupied or combustible homeland, follow such minimal outside entries. The internal configuration of the container must be determined in order to change it, so that none of the internal components, such as partitions, should be cleaned or blown, and the container must be poured and cleaned according to the appropriate methods. safe for repairing after the container has been cleaned, testing may be carried out in the middle of the container with the fire gas detector in front of the cob of hot work and periodically during the repair. Sometimes it is impossible to properly clean up and clean the containers.

________________________________________________________­­­____________

3. Service personnel pіd hour of work on _____________________________

____________________________________________________________________

To revise the vimogi of operational documents, the statement of the clerical workers, the inspectors of safety equipment and energy supervision;

Do not allow work space third-party osіb and osіb, yakі not mаyut vіdnoshennia to vikonannya work;

Vmiti to press the pershu to help the sufferers;

Vikonuvat less that robot, on yak otrimano allowed;

Beware of signs of safety;

Dopovіdat kerіvnik robіt about respect, inaccuracies and other damage could not be taken care of;

At the time of the vindication, I will call the call and I will fire the command on the phone

that vzhivati ​​zakhodіv schodo likvіdatsії pozhezhі.

II. Vimogi safety before the cob robit

Before the cob, the attendants of goiter work:

Take a briefing on how to enter the rules of safety at the work of the worker;

Put on an individual zakhist, installed for your mind;

Prepare a working space, a tool, an attachment and materials, laying them out in a careless order for koristuvannya;

Review the visibility and integrity of the fence, outside and blocking outbuildings;

Revіriti nadіjnіstі zadіynіstіnі obladnannya, turn on mіstseve svіlіnnya i vіrіrіtі pratsezdatnіstі ventіlії;

Review the visibility of anti-burning inventory and access to it;

Let the clerk work about all respect, inaccuracies and without yoga, do not start working.

III. Vimogi security pіd hour robіt

Pіd hour of work and service personnel goiter:

To establish a constant control over the property’s property, especially respect for the property and property of fences, and outside and blocking outbuildings;

Do not zastosovuvaty wrong possession, tool, priladdya not pratsyuvati when taken or open fences;

be respectful, do not argue and do not argue with others;

Do not hang around the roaring mechanisms and parts of the aggregates that wrap around, and do not work with insufficient lighting of the working area;

Do not allow access to the installed operational documentation of the robot technology.

1. Wimogi security in emergency situations

In case of malfunctions in possession, tools, attachments, or the creation of an emergency situation during the operation of the work and service personnel of the goiter:

Put the robots in front of the pratsyuyuchih about insecurity;

Dopovisti ker_vnik robit that for yogo team to get used to coming in as soon as possible emergency situations;

carry out the elimination of malfunctions from the suvorim to the time of entry into safety, and the conclusion of the operational documents;

RAT "EES Russia"

Typical instruction for the protection of work and work hours at turning and guiding benches
RD 153-34.0-03.289-00

Moscow
"Vydavnitstvo NTs ENAS"
2002

On the basis of these standard instructions, enterprises and organizations are expanding and ratifying instructions to improve the mental minds.

Typical instruction for the protection of work and work hours at turning and guiding benches
RD 153-34.0-03.289-00

Date of introduction 01.07.2000

INSTUP

Metal turning can be accompanied by reality to a number of shkidlivih and unsafe virobnichy factors, including:

Electric strum;

Drіbna shavings and aerosols of oily-cooling water;

Pieces of metal, what do you see;

High surface temperature of the workpieces and tools;

Movement of the rіven vibration;

Machines that are collapsing, and mechanisms, transferring machines, preparing materials;

Insufficient illumination of the working area, the presence of direct and visible radiance, increased pulsation of the light stream.

When expanding standard instructions vikoristany such standards of the safety system: Not safe and shkіdliv picking factor. Classification; Fire safety. Zagalni vimogi; Processes of virobnichi. Zagalnі vimogi to bezpeki; GOST 12.3.025-80 Processing of metal in cuttings. Wimogi security and in.

Turners for an hour of vikonanny work vidpovidno to the obvious qualification of goiter, to vykonuvat vimogi bezpeki, vykladenі at tsіy іnstruktsiї.

In times of non-violent position of the instructions, practitioners can be attracted to disciplinary, administrative, criminal and material responsibilities, depending on the legislation of Ukraine, depending on the gravity of the legacy.

1. ZAGALNI VIMOGY SECURITY

1.1. Before independent work on turning benches, individuals are allowed who have passed a medical examination, have been trained in the turner’s program, instructed in the protection of work at the work station, familiarized with the rules of fire safety and have acquired safely accept roboti.

1.2. The turner is allowed to work only on the workbenches, to the extent of any assumptions, to work on the job, as entrusted to his administration workshop.

1.3. The personnel who serve the lathe typesetters are to blame for the mother: a suit of extras or a napkin overalls, zahisnі eyepieces, yufte slippers.

1.4. Like a slime pad (doused with oil, emulsion), a worker of goiter vimagati, so that they sip yogo with thyrsa, or robit it yourself.

1.5. The turner is harrowed:

Pratsiuvati for vіdsutnostі on pіdlozі under feet of wooden ґrat on the dovzhіnі verstat, scho including getting vzuttya between slats and safe passage of shavings;

Repair on the bench with a broken ground wire, as well as for the presence or failure of blocking outbuildings;

They stand and pass under the height of the vantage;

Pass at places that are not designated for the passage of people;

Enter without permission behind the fence of technological equipment;

Know the fencing of unsafe zones

Miti hands in emulsion, olії, extinguish and wipe them with wiping brushes, fermented with shavings.

1.6. About every unfortunate fluctuation, it’s negligent to tell the master and return to the medical center.

2. VIMOGI SAFETY IN FRONT OF THE COB ROBOT

2.1. Before the cob, robotic turner goiter:

Accept verstat as a replacement; verify, chi is well tidied up and working place. Do not start the work before the adoption of the revealed nedolіkіv;

Put on overalls, zip up the sleeves of that jacket, put on a headband, check the visibility of the eyepieces;

Reconsider the presence and correctness of the shackle casing of the chuck chuck, shackle screen, outside attachments, such as shavings, rinds, which are cooled;

Adjust the lighting in such a way that the working area is adequately illuminated, and the light does not irritate the eyes;

Verify the presence of the verstat oil. When mastil, it is only necessary to coristuate with special outbuildings;

Perevirity on idle to typeset:

a) the efficiency of the governing bodies;

b) the correctness of the oil and cooling system;

c) the correctness of fixation is important to emphasize that remembrance;

d) spratsovuvannya zakhista - the cartridge is guilty of zupinitis when the skin is thrown out, the verst is not guilty of being stung, the docks of the casing will not be placed at the outer position.

2.2. The turner is harrowed:

Practice in slippers, sandals, barefoot shoes;

Zastosovuvati wrong and wrongly imprisoned cutting tool and attachment;

Torkatisya strumov_dnih parts of the electric control, vіdkrivati ​​the doors of the electroshuffle. At times, you need to go to the electrician.

3. VMOGI SECURITY PID WORK HOURS

3.1. Pіd hour of robotic tokar goiter:

Install those important details from the statute less for additional vantazhopidyomnyh zabiv;

Do not rush to work for the next hour, do not allow others to work;

Submissions for processing and processing details should be laid firmly on linings;

At the time of the vinification of the vibration, the sound is verstat. Verify the fastening of the workpiece, cutting tool and attachments, get used to the entrances for the adoption of vibration;

When processing parts from metals, to give strіchkovu shavings, koristuvatisya chipbreaker;

Beware of winding the chips on the cut part, or cut and do not straighten the chips on yourself;

For the removal of shavings from the vest of vikoristovuvat special hacks and shchitki-koshtorisi. Do not allow the tidying up to pick up the work yard for an hour of work;

Zupiniti versat that vimknuti elektroobdnannya in such vipadka:

a) uniquely verst to wind for a short hour;

b) at the time of timchasovy pripinennya roboti;

c) in case of interruption in the supply of electricity;

d) when picking, mastili, cleaning verstat;

e) in case of any inaccuracies that threaten with trouble;

f) when lifting bolts, nuts and other fastening parts;

In a cam chuck without a tailstock support, it is possible to close only short, long trochs more than two diameters, vrіvnovazhenі details; in other ways, for support, to coristuvat with a back grandmother;

When processing in the centers of details with a length of 12 diameters and more, as well as with fast and power cutting of parts with a length of 12 diameters and more, zastosovuvat additional supports (lunette);

When processing details at the centers, re-mount the tailstock, brush the center after the installation of the shirring;

When working with great speed, zastosovuvat center, what wraps around, what reaches the milestone;

When turning long parts, follow the center of the tailstock;

Stitches for the correct installation of the rіztsa that do not add a new rіznі shmatka to the metal; vikoristovuvat pіdkladki, rіvnі ploschі raztsya;

The cut is made with the least possible villot and no less than three bolts.

3.2. Under the hour of work at the workbench, the turner is harrowed:

Practice on the bench at the mittens or mittens, as well as with bandaged fingers without humic fingertips;

See the chips without interruption with your hands and with a tool;

Blow through the squeezing blows of the hose on the broken part;

Corystuvatisya to the light fixtures with a voltage of 42 V;

Take it through the work bench, whether it be objects, pull nuts, bolt those other good details of the bench;

Galmuvati wrapping the spindle with the onslaught of the hand on the parts of the workpiece or the details that are wrapped;

On the move, carry out measurements, check the cleanliness of the surface of the finished part with your hand, carry out grinding with a scouring pad or with an abrasive;

Rebuvat between the part and the workbench when the part is installed with a vantazhopid_ymal crane;

Under the hour of the work of the verst of statistics, vіdkrivati ​​and znіmati fences and outbuildings;

Pratsyuvati iz spratsovanimi or clogged centers;

Sharpen short cuts without a sharp mandrel;

Koristuvatisya with zatisk cartridges, as if wearing working surfaces of the cams;

When cutting important parts of the details or workpieces, take a hand, which cuts the end;

Zastosovuvat center іz znoshenimi chi clogged cones. Diagnosis of turning centers due to confirmation of center openings of turning parts;

Leave the keys, attach another tool to the right workbench.

4. SAFETY IN EMERGENCIES

4.1. In the event of a breakdown of the verstat, turn on the verstat at the robotic control panel and tell me about the master.

4.2. At the time of the burning of the oily ganchirka, possessed or else blamed later, turn on the verstat, tell about what happened, the administration and other practitioners of the workshop, and proceed to the liquidation of the burning fire.

4.3. Have appeared emergency situations, not safe for your health, or for healthy people, turn on the verstat, deprive the unsafe zone and tell about the unsafe care to the average kerivnik.

5. COMPLETE SAFETY SERVICES

After the completion of the work of the goiter:

Vimknuti verstat and electric motor;

Organize the work space:

a) tidy up the shavings and metal saws;

b) clear the verstat in the woods;

c) carefully fold the workpieces and tools on the opening plate;

d) brush the parts of the verst to rub;

Give the verdict to the clerk or to the master and tell him about all the inaccuracies of the verstat;

Take out overalls and hang them at the closet. Vimiti rebuke that hand with warm water with a nice or take a shower.