Do-it-yourself orthopedic desk for a schoolboy. Yerisman's school desk. The correct setting of the child is the hour of reading that letter. Warehouse parts of a child's party

How to make a child's steel, a glass of wine for a child with an original school desk, and a water clock for toys. At this article, we can tell you how everything will be done in one day.

Bagato batkiv vvazhayut for better to buy a ready-made table for a child and not to strain. Ale є th takі, scho just can't afford it. But to love to work all with one's own hands and need to expand one's interior. The advantage of this table is rich functionality. This is a school desk, a house for grilling and a place for picking up toys.

In order to create a wooden desk, it is necessary to supply material, a sheet of furniture chipboard, a different color. And it is possible to construct її out of excess material in the form of front wickerwork, or out of non-necessary furniture. The very same economical option will be descriptions for this article, but for the rest, you can read how you can work

Necessary tool that material


- Electric jigsaw (hand saw)
- Hacksaw for metal
- Manual milling verstat(can be replaced with a downy drill bit for wood of the required diameter)
- Drill
- Kutochok with a line
- Stationery nizh
- Roulette
- Olivets


Material
- chipboard
- fiberboard
- Self-adhesive plіvka vіdpovіdny color
– End stitch on chipboard, different color
- Samonarizi or furniture screws, flowers

Accessories
- Piano loop 1 pc.,
- Furniture hinge 4 pcs.,

Let's move on to the details of that armchair

For the cob, you need to throw chairs on paper, do not forget what you can change for the bajan.




- Sidewalls 2 pcs. (300 mm x 790 mm), cut may be 90 - 60 degrees;
- Police 3 pcs. (520 mm x 300 mm), police dovzhina with the improvement of the comradeship of the sidewalls;
- Doors 2 pcs. (280mm x 120mm);
- Dah 2 pcs. (295mm x 600mm), you can make one half of the Dahu from fiberboard;
- Back wall 1 pc. (520 mm x 560 mm), її tezh it is possible to ease and vir_zati from fiberboard.

Virіzaєmo details of the table - budinochka
Alright, let's get down to work. On the surface of the prepared material, it is possible to paint details with olive oil behind the rims and to see them with an electric jigsaw.


Respect! The width of the details of the dahu obov'yazkovo is due to the width of the main structure by two centimeters from the skin side.


The ends on the inside of the parts made of chipboard must be glued with an end stitch on an adhesive basis. Lay the line to the end and carefully pierce it with hot prasko, having scribbled between the line and the praskoy arch paper. Cut the edges of the stitches with a hospitable knife.

We prepare the details

Robimo basis
To one sidewall, screw three polices with screws. On the other side, the police have the same way to get another sidewall. In order to attach the screws, they must be sunk into the body of the material. For whom, for drilling in the required area, it is buried with a drill, which exceeds the diameter of the screw droplet. From the front side, droplets can be puttyed, as if it is planned to decorate the end face. In another way, use furniture screws with plastic plugs, or stickers. Viyshov frame of the future party



We install yes
We take a piano loop and see the necessary rosemary, cut it with a hacksaw for metal. The loop is fastened to the upper police and the sidewall of the dahu on the equal part of the chipboard. In order, when laying out the table, the loop did not separate the working zone of the party.
Another part of Dahu is simply screwed to the core.



We install the door
The door to the table can be built on a piano hinge, as well as on furniture hinges. It is necessary to remember that when using a piano hinge for fastening the doors, it is necessary to put intermediate ones.
Let's look at another way of fastening - a furniture loop.
Important! Doors are guilty of obov'yazkovo buti of the correct rosemary, so like a stench on the lower folding table.

For fixing the doors behind the additional furniture hinges, there is a milling workbench (or a special drill bit). You can turn the handles as if you were looking at them (decorate according to the child's style), so you can screw the furniture.
The back wall made of fiberboard is simply nailed with flowers.

Decorating
All visible parts (behind the bazhann and internal) can be covered or pasted over with decorative plivkoy, so that they can be self-adhesive. In order for the spit to be trimmed for a long time and the yakoma to be glued to the wool, it is necessary to twist the soft cloth and hair dryer.

The child's desk is ready, so it looks in the chosen look and looks more like a budinochok:


And the axis looks so out of place at the disassembled look and looks more like a school desk:

The correct position is more important, at an early age. The skeleton of a human is formed in the child itself, that is physiology. It is even more important to give respect to this - the desk is correctly designed, to allow learning to promote success and to allow stoop in the future.

Do-it-yourself preparation before choosing a party

As soon as it was decided to prepare a desk for the house, it is necessary to stock up on materials and tools for construction. You will need a scheme of similar furniture, you can marvel at the measure, or you can prepare an armchair with a hand. When choosing a material, take it to respect the financial warehouse, you can win different materials, which allow you to save. The basis for a future party can be:

1. Metal fold (width 30 mm zipper 2 mm).
2. Zalіzna pipe, trikutna, square (30 mm in diameter and 2–3 mm thick).
3. Wooden beam 50*50 mm.
4. Solid slab made of wood (please specify walkers from chairs).
5. Derev'yana chopping block (tovshchina that width on the court).
6. Furniture fittings for ozdoblennya.
7. Lacofarb materials.

Also, you need self-tapping screws, bolts with nuts. The following tools are used in the selected material for preparation:

1. Zvaryuvalny apparatus (for new equipment).
2. Set of twists or a screwdriver from a set of bits.
3. Shlif kutova machine (grinder with a disk).
4. Circular saw or hacksaw.
5. Dial an emery paper.
6. Furniture glue.
7. Hairdryer (can be vikoristati zvichayny).
8. Electric drill (drill for wood and metal).
9. Electric jigsaw. (For figured cutting).

IMPORTANT! Details from the tree are guilty in a dry place, which is aired, to prevent deformation and cracks. Metalwork before choosing a structure, refinish it with an emery paper.

Preparing a child's party

Razbero kіlka variantіv konstruyuvannya table different materials. Before the cob, there is a row of chairs and a workpiece.

UVAGA! To give respect to the kuta of the party's arrogance, and also to be appointed as the foundation of the party.

For vikoristannya metal kutochka on the table support, we will prepare the braces zgіdno zі the selection scheme. In this vipadka we need:

1. 2 coils 50 cm and 2 coils 75 cm. It’s worth it to let them walk among themselves, making a frame for a stiltnitsa with such a rank.
2. 4 kutochki (dozhina in the fallow in the growth of the child 70-80 cm). Coils can be twisted with bolts and zvaryuvannyam, 2 pcs. backs one to one for the lower table.
3. 2 coils 50 cm.

Dali, ready to rest the table, it is necessary to fasten it with the base of the stylnitsa in the middle for additional zvaryuvannya or bolts. Like a style will be vikoristan fiberboard 50 * 75 cm, so it is possible to vikoristan kіlkoh derevnyakh block. Then open the next hole in the frame of the table and close the stylus for additional self-tapping screws. Complete the entire construction with lacofarb rechovina.

IMPORTANT! Zvaryuvalni robots, carried out at a special occasion, stolen from the fire and specially introduced mist. Kut nakhily party even more important change to the ridge, remember about it.

For folding a table from metal pipes, the same schemes are required, as when folding from kutochkiv.

Three subsequent schemes for folding a child's party with regulation pidyoma:

• the foundation;

• pidyom mechanism;

• style.

School desk made of fiberboard

To assemble a batch of fiberboard, you need a sheet of material approximately 1.5 * 1.5 m. Required details:

1. Style 50*75 div.
2. Nіzhki.
3. 3 tie sheets.

You can give the shoes a uniform, rest for the style and the pidlogs, owe buti equal, for the security of the stability of the party. Dali, it is necessary to fasten the structure behind an additional screed, two screeds under the stylnitsa, one - for the base of the bottom. Finish the edges of the table with furniture fittings.

Desk from a tree

For the creation of a childish party from a tree, it is necessary:

1. Bars.
2. Board cut 20 * 2.5 div.

IMPORTANT! The details of the armchair are made with roses, finished with an emery paper. At times of visible defects of the village, use or replace.

1. Cut with a hacksaw or a circular saw 3 boards with a length of 75 cm, cut 2 bars of 48 cm and 2 bars of 73 cm.
2. Lay the planks firmly and secure them along the edges with bars;
3. The bottoms of the joint with bars in the places of the apex stick for additional bolts or self-tapping screws. As a double styl is victorious, the binding is prepared and fastened in the center of the lower rail, which is pulled together.
4. Finish with lacofarb materials.

Folding table for schoolchildren

In some cases, there is a need for adjusting the height of the table and kuta badly, for which the mechanism of fixation is needed. Fallow in the design of the table, zastosuvannya funktsії reguluvannya, vimagatime change in the design of the lower, for the wine, if it is necessary to make a stiletto zminoy kuta nachily. You can find out how much you see the mechanism of height regulation, you can choose the right one by poking around in the net. Let's take a look at one of the options.

We take as a basis the folding table from the village, described above. To the chosen style, close 2 straight from boards 20 * 2 cm and a length of 40–50 cm. 20 * 2 cm and a length of 30-50 cm; Table regulator with latch is ready.

Yak desk, yak є head part inter'єru whatever initial mortgage. Also, a school desk can be realized at home with a rusticity, so it was possible to build a school desk with your own hands for children. At this article, I am rozpovіm, like the author, having made a small school desk with his own hands and a handy little table, which allows you to sip a book with pictures from your hand, sip, drink from plasticine or lay out toys. Before preparing, it is necessary to identify with the materials needed for this.

In order to pick up self-confidence, we need:
*Hinges in the piano with a length of 50 cm.
*Confirmation.
*Samorizi.
* Emery paper.
*Metal folds.
* I cut a furniture board from pine, for a party according to scheme 1, and for a style according to scheme number 2.

The axis and all materials are ready.

Also need tools:
* Electric jigsaw.
* Screwdriver.
*Grіfmashinka for easing of grinding robots.
And so looking at the armchair of our future party, to the fact that working on the details with the measurements taken from the head, it would be not only wrong, but not exactly.

Croc first.
We need to pick up a desk in front of us, and then we’ll also take a seat, so step by step we proceed to the chomping process of choosing. How to plant all wooden details due to less shortness, so just be encrypted. Sanding is best done on a sanding bench, or for an additional sanding machine, if not, then you can use a fine sandpaper paper. Treat the next sandpaper with a grain size of large R40, then medium R120 and more R220. Gostri kuti is corrected for the help of an electric jigsaw, rounded by him. After grinding, it is necessary to look at the dark edges in the legs, to fight so that the child, as if you were sitting at the desk, did not feel the discomfort, and also, when turning to the sides, the knees did not rest.

Croc is different.
Now it’s necessary to attach the bottoms to the bottom of the box, work hard for additional confirmation, fasten them more quickly with a screwdriver in the open, as it is necessary to work the back, the diameter of such troch is less. The bottom is lowered 8 cm lower, the lower edge of the skin is lower, as shown in the little picture for diagram 3. Since the front wall of the drawer is fixed, vrakhovuchi, that the upper edge of the box is to blame but on the equal footing, in order for the box to be practically ideal and equal. Using a screwdriver, attach it to the screws on the back wall of the party, the ledge, which is settled, is guilty of seeing a sprat of centimeters higher, lower edges of the legs themselves.

Crook the third.
A school desk without a style, price not a school desk, that її at once mi and attached, but you need a piano loop for that, creaking її it is required so that you can easily lift and lower the style without any difficulty on top of that sticking, and also when closed, the surface is small, for a shorter dot it is even. At the result of viyshov of medium dimensions there is a box under the stylist, where you can save such speeches, like albums, rosmalovka, attach that richly different dribnitsa.

Varto also vrahuvat, that the edge of the back wall of the party, that you step out, do not let your hands slip and fall, and let’s look at the underlay, as if you can leave it on the bed, do not be afraid about those that the handle curls when you pick up the caps, like in photo 2.

Crook quarters.
Axis so і исишли исломенненненненненненнення, ryamo yogo tozozh zolov, pіslu yogo nіzhki zakrіplyuєmo pіd kuto to Sidіnnya, Yakі kr_pimo for the additional trapez_pod_bno-ї doshki, їn oxo construction, knowing that children love to steal on the chairs, all the details on the sticks must be fixed, vicorist metal little pieces, as they can be mutually s furniture, marvel at photo nizhkah in the supporting part of the napіvkruglі viїmki. Frontally, there is a groove for the backrest in the seat, which is shown in photo 5. The rest at the upper part was rounded and cut open at the shape of the heart, so the stilchik is easier to carry, it is easier to see such a shape behind the help of an electric jigsaw along the back of the painted little one.

Syn growth and youmu need work space, To be engaged in literacy, malyuvati, read that іn. Moreover, the place can not be at the coffee table at the three deaths, but in the same place, which attaches the correct position. In short, tse can be a school desk on the virist, so with a height that changes.

Just at the garage, there were a few pieces of MDF parts lying around, so I couldn’t think of where to stick them (after all, the edge didn’t stick on them, and the roses didn’t allow vikoristovuvat more). And then it dawned on me that beyond the rosemaries - the stylist is ready, and if you spit out of them, then you can close the edges!

The steel is guilty of being folded into two halves: the foundations that stand on the floor and fall uphill and down along the straight columns. Bottoms and style - MDF, reshta - scraps of laminated chipboard.

Otzhe, I started from MDF. Weaved the outline of the bottom on the pieces of the hardboard and sawed them with a jigsaw. Smoothing the edges of the LShM-koya, creating a solid smooth contour (likely to the mark).

Milling cutter copied a detail to a friend. Reportingly for the preparation of details with radii, I described.

Vibrating the groove under the edge with a disk cutter. Without becoming a chіpati, the one who wants to earn a gostry kuti.

The next stage was the preparation of stіyok for the stіlnitsa. (before them, I know a couple of details that have been filed on the formatter, which I didn’t need, wind from three sides closed with a PVC edge). Putting them on the legs and marking the edges (straight bars will be screwed behind these lines).
Transitions to the very straight bars. So, as the school desk is guilty of buti cunning form, virishi vіdmovitysya in the form of a rectangular profile and vykonav їх at the sight of the "drawing". Having estimated that curvature by eye, so that they do not go beyond the contours of the supports. One edge (according to the kovzatim, the st_yka is guilty of buti equal, bazhano with PVC edging - won't be more wear-resistant).
If you pick up everything before you buy it, then it turned out to be such a sandwich. Naturally, all the details are shattered in a subfloor copy (and vrakhovuchi, MDF is one-sided, then it is mirror-like)

Then, having drunk a tsarga for the foundation, that police under it with a dozhina + 32 mm like a tsarga. And also Tsarga and the police under the style of the equal dovzhina.

The next stage - tse. I will not report on what I will do - everything has already been described earlier. I’ll only say that I’ve only stuffed the edge on the legs and one police (it didn’t get any more) the stitch after wandering around the melamine.

Now naytsіkavіshe - folding. Mustache won at the confirmation. Sowing, as usual, from the base of the table. Having twisted the front straight bars from the tsargoy and screwed the lower police to them (it is crushed for greater rigidity of the structure).

Putting the support on the workbench, and turning along the lines of the roses, they were applied to the cob itself, screwing the entire block of the cob to the support. The fastening was sealed with a pair of self-tapping screws (then I will fill it with self-adhesive plugs). After that, like the front beam of fixings, laying a stylus of the style on the plate and attaching another beam, fixing it with a similar rank.

These manipulations themselves are tested with another support. As I chose the stіyka under the style, I didn’t take a picture, but the principle is the same: the tsarga is pulled together with the police, like the sides are screwed up to the stіyok.

As a result, we have a couple of such ready-made blocks.

The stench is inserted one by one to dosit schіlno. It was too much to screw up the style.
Tsey nedolіk dosit shvidko Bulo corrected. So that it doesn’t strain too much with the rosette, screwing it onto some plastic wraps.

In principle, it was only left to drill a number of openings at the posts for the stylnitsa and one across the way in the support and drive there with a bolt. If I want to, I’ll think about hammering the adjustable support like a “lamb”, and replacing the stitched dirka in the support, I’ll drive a nut into it, like:

Ale tse in the nearest future. As long as my Yaroslav is sized at the right time, and I ran to work.

NU and nasamkinets kіlka photo from the right angles.

A child's style, which is chosen correctly, is a miraculous way to save scoliosis in a child. In children's mortgages, these shoes are put on the singing specialists, as a control over the quality of the place for the work. Ale in the home minds of the cim may be busy with the fathers.

The school desk is ideally ecological, durable and safe product. On your own, you can easily prepare a handy and viable virib, so that you can work in your home minds. The main plus of the camp will not be less than saving money, but also buying furniture for a specific type.

How to choose the future style?

First, for which it is necessary to appoint, with the design and construction. Parties buy a lot of views:

• a straight-cut classical school desk (the simplest option, which is simple and easy to install);
• ergonomic (can save space).

Slid also vrahuvat the number of hanging screens and vіddіlen. The stench is necessary for the collection of writing supplies and materials, as it is necessary for the hour of learning. As an option, one box can be locked out of the lock, de child in the style of his secret speech.

If there is a free place in the room, then a small place for a schoolboy. Virib avenge the curbstone, boxes, policemen, yakі it is not necessary to hang.

An uneasy variant of preparation, but the most functional, became a steel on the “transformer” kshtalt. Vіn serve three times for an hour, so as to be able to control the height of the lower one and the frailty of the stylist.

How to prepare that design?

The first step is to find the necessary scheme for a possible party with a song design. On the Internet, or in specialized literature, you can find impersonal examples of making your own hands, or you can work for individual experiments. After whom everyone prepares required materials, accessories and accessories.

The school desk can be robiti for 4 kroki:

• From the selected material, prepare 4 sheets, to make a cover, end walls in a quantity of 2 pieces and one inner. Rosemary to shy away, leaning on the armchair, or for the bazhanny. Narizku rozhlyat their own hands, or buy ready-made details in the wake-up shop.

Important! The standard option for a schoolboy, whose height is 115-120 cm, is to make the height of the table 46-47 cm.

• On the panels on the side of the beast, it needs 5 centimeters closer to the edge, then 35 centimeters at that very part, and a little lower. The mark is important to keep identical. At these places, holes for screws are drilled. The rear panel is inserted here. The end walls must be joined from the inner side. With this, the screws do not tighten.
• At the stiltnitsa, it is necessary to drill open the door. Self-narrators will turn back on ¾ of their dozhini. And the whole geometry is residually estimated by the experiment - it can be correct.
• On the surface of all ends, a special stitching is glued to ensure safety. The tree is resolutely cleaned, and the surface is covered with a special zahisnoy bag. Tse mozhe buti varnish, oliya abo farba.

A simple variant of the party ready.