Storage of panel houses. Do-it-yourself panel booth

A sandwich panel is called a structure that is made up of insulation and a large amount of covering material and victorious as the main building material for the building of a varied design. For the preparation of sandwich panels, vicorous is less likely to be over-reviewed and conform to the standards of the material. As a rule, corrugated board is the main material for a curved ball (galvanized steel is covered with a polymer).

Warmers

When choosing sip panels, it’s still better to get help to fakhіvtsіv. And yet, there is no such possibility, varto vivchiti the main types of heat-insulating characteristics.

There are three main types of insulation:

• polystyrene (pinopolistyrene);
• mineral wool (basalt insulation);
• foam polyurethane.

І in the skin z tsikh teplyuvachіv є svoї prevagi and nedolіki.

Stuffing from polystyrene in the panel

Polyfoam is positioned as a heat insulator, which invigorates its durability. In addition, wine is an environmentally friendly material. May the power of water resistance and do not be afraid of the sun. Ale, with this, such material is easy to slahuє and lightly burn.

Mineral wool is practically non-flammable and non-flammable for health.

Tsey insulator is also good to endure biological and chemical action. But with a set of such important pluses, basalt insulation may even have a low resistance to water.

It is bad for polyurethane to conduct heat, and it is easy to sleep, but with a high insulating threshold.

Tovshchina to the budmaterial, but obviously, the price is to lie directly in the tovshchina of the insulation itself.

The price of food for Sip panels is 1,300 rubles per square meter. Її tovshchina - 174 mm, width - 1250 mm, height - 2500 mm.

In our country and in the countries of SND, sandwich panels of the following sizes are installed:

12+100+12=124 mm;

12+150+12=174 mm;

12+200+12=224 mm.

OSB (OSB)

Understanding the concepts of OSB slabs follows the rozpochati from the global classification. Іsnuє chotiri main types of OSB. The skin of them looks like others only by their indicators of moisture and minerality.

• OSB 1 - a board with the lowest indicators of moisture resistance. This type of slab is often vicorated at the installation of light-weight parts. The advantage of these plates is their low price.
• OSB 2 may have a low moisture resistance threshold and at the same high moisture resistance. Such slabs of vicorous are important for the manufacture of furniture, as well as for load-bearing elements. Rіdshe OSB 2 zastosovuyut in the budіvelniy sphere, and even more so for internal structures.
• OSB 3 is one of the most popular types of boards. Tsі slabs to eat at your own mіtsnіst and stіykіst to vologa at a reasonable price. Vykoristovuyut їkh chastіshe vіdіvnitstvі for budovi like façade, so і vnutrіshnіh ozdoblen. Sometimes OSB 3 plays the role of a covering material for overlapping.
• OSB 4 - OSB boards have the highest threshold of minerality and moisture resistance. Їх vicorist for building constructions high level navantazhennya that in areas with increased moisture.

Housekeeping of booths with sandwich panels: advantages and disadvantages

As with any material, as with any sandwich panels, there are both advantages and disadvantages.

A message about admission. The main advantage of this material is the high quality of its quality, about how high the quality of the material is worthy of price. This factor plays an even greater role in the case of a buddy koshtoris. Adzhe vykoristannya tsgogo material suttєvo nizhuє vitrati. For the lightness of the panels, the weight of the whole structure is lightened, and then, there is no need for a solid foundation.

More booth projects can be seen at the heading “Budinkiv projects” on our website.

Houses from sandwich panels with your own hands

The first thing you need from your right is the project of a future life. Next, give special respect to yoga, do not forget about the help of that prayer. There is not much opportunity to inspire yoga independently from the folding of the rozrakhunkiv, there are a lot of companies ready to help you with your food. We will try to show you all the stages of life in photography, cover instructions. But all houses are individual, our photo can only be seen as an informational guide.

Before the speech, from CIP panels you can be no more than a house, but also come to living houses. The stench can accommodate the verandas of the kitchen.

The next step is the construction of SIP-panels or their self-sustainability. You can remember them without intermediary at the enterprise, as if you are engaged in manufacturing. Here you can look through the catalogs and select everything you need for further installation. When choosing panels, do not forget about the basis - the foundation. For constructions made of such material, as a rule, the foundation is installed on twine paws.

It is necessary to install water supply, scorched electrics along the future booth before filling the foundation.

In order to avoid the curvature of the cutіv or the difference in height, all panels before installation need to be checked for integrity and the thickness of the rozmіrіv. To mark inaccuracies, return to the postal worker to replace the material.

In addition, as the foundation of the floods, it is necessary to build a yogic binding for the help of a wooden beam. Let's show the kuti and help the percussion instrument to open the door. For additional help, having opened the timber, they are creaked from concrete with 12 mm anchors. Vіdstan 2.5 m, which is recommended. Dali, on the installed foundation, they choose life itself. Repair the folding to zero overlaps, with which the first SIP - panels are laid on the timber.

Wall frames are taken from timber. On the yoga perimeter, with special flowers, a barricade is fastened. Golovne, here you can see the vertical calibration and cutie of the frame. Even if you miss here even 1 mm, the wall will be crooked and correct and you will no longer be able to. After the frame is installed, panels are laid on the new one.

After the building of the central construction, the foundation of the opening begins. Sticks and cuts of panels are used for additional cut boards with a size of 25*100 mm. The mustaches are sealed with a hermetically mounting pin.

Overlapping between tops and all bearing structures is better than building wooden ones. You can vikoristovuvati like timber, and doska. Photo of the stages of life a little lower.

Foundation for a house from SIP panels

The foundation is the foundation of life. Vin conveys all the promises of life on the support balls to the ground. Krіm mіtsnostі the foundation itself, it is required to vrahuvati:

• I will cover the area, rest on the ground;
• supporting the ability of the soil itself;
• rivers of underground waters.

With the widest pardon, when the foundation is poured, fakhivtsy vvazhayut supra-worldly rozmaїtіst in new concrete and metal.

The most popular types of foundations are:

• paly (palovy-strіchkovy);
• stovpchasty (stovpchast-strіchkovy);
• monolithic slabs of crushed earth;
• strichkove burying;
• strіchkove zagleynnya іz plinth.

Ale, varto means that the middle variant for frame panel booths is the best option to be more buried.

Laying of binding (screw) timber

For laying, a beam with a size of 2.5 * 1.5 cm is taken. Dali, the timber must be hung up along the kutah for an additional cutting. After whom the details are fixed. For proper fixing in the beams, they are opened into the dove 1-1.5 cm behind a diameter of 2 cm and the dowel is started.

The fastening of the beam to the foundation is carried out for the help of anchor bolts with recessed ones. The width of the fastening is close to 1.5-2 m.

Blinding of pidlogs in a booth from SIP panels

Another proof of the validity of the Canadian technology of everyday life is the technology of obstruction of logic.

Sublogs and overlaps will also be made from SIP panels.

Wanting a lot of contractors to recommend laying in such booths a special wooden underlay with insulating between lags and beams. Tsі pіdlіgі vіhodіmi vіdіnymі vіtrіvіlіshimi. In addition, it will be easy for you to pick up a sublog or repair it.

Building walls from SIP panels

When the walls are built, it is necessary to drink carefully until the choice of the material, even if it is rich enough in which to lay the life of the future life. The best option for zovnishnіh robіt there will be a beam with a diameter of 15 cm. As for the height, there is a minimum of 1.5 m. For the inner part of the podium 10 * 15 cm. Tse pryyatnі razmiri, yakі podmozhut zaschadit on vitreous material, allow minimіzuvati kіlkіst suіvіv і stikіv і reach іdealnoї smoothії ї probable stіn. It's not easy to choose the words, you need to know.

Before laying the timber at the vіntsі all materials need to be pіdіgnati vіdpovіdno to the height and give them a form. For crown z'ednan, it is better to use the method "in pivdereva" or "in tying with a root thorn". It is better to wrap the z'ednannya of the most important elements with a cut or on veneers. And the inner yards are like sticks, and kutiv are more likely to be closed with a half-cut.

Repair, non-intermediate installation is required for laying the foundation of a crowned beam, trimmed with an antiseptic lock.

Blinding Dahu in a booth with SIP panels

Yes, for a house, pobudovanogo in this technique, you can be zvichaynіsіnkim krokvyanim. For this type of dahiv, the powerful support is at the sight of the grooves or mauerlat, like the beams on the mountainous ceiling. The crucibles are installed on the supports, stuffed with gratings and laying the covering material.

If there is a need for insulation, then for a cold mountain in the new, there is nothing to consume. And the axis is in the plans for the installation of an attic, then between the beds of the varto lay an insulator and close it with a vapor barrier.

Krіm krokvyanoy, no less popular є yes іz SIP panels. For this type, we install starter caps in front of us, yakі fasten to the Mauerlat with bolts. І t_lki after the second place of laying the panels. The panels are mounted from one side of the dakha, step by step increasing the height of the headband with a suede. As soon as the robot with the first conic is finished, you can proceed to the offensive.

This method of installation is more simple, less significant, but not less important.

Renovation of the facade

Renovation of the facade is the final action of everyday life. Kozhen gospodar rob yoga for his relish and financial possibilities. Among the options for finishing at once are more popular: facing ceglas, siding, decorative plaster.

Video

Take a look at the video about the life of a booth with CIP panels.

The current trend in the middle of the building is frame-panel booths, which are also called frame-panel. Zavdyaki zastosovuvanіy tekhnologii ї it is possible for a non-trivial hour to take it ready and, what is important, like life. It's wonderful, but after a few months after the beginning of everyday life, the zamovnik can be in full, more and more transformations of the houses. So, what are the peculiarities of the frame-panel booths, about what kind of shoes is it necessary to know about the potential zamovnik?

The essence of the technology of frame-panel housing

Read about the preparation of framed huts from the so-called sandwich panels (sip panels) from industrial minds. At the factories, all the details are prepared ahead of time, after which they are delivered to the next Maydanchik. The choice of panels for frame boudins is high-current on the right, all elements of good have shown themselves in operation.

Understanding the sandwich panels and її warehouse

Panels for frame booth Mayut heterogeneous structure, the stench is formed from three balls, zavdyaki why good otrimuvatimut heat in the middle of the booth. Zovnishni balls are oriented chipboards (OSB), and among them are PSB-S, which is a self-extinguishing constructional polystyrene foam. Elements of sip-panels are glued one by one with polyurethane glue. Okremo sled designate, scho zavdyaki balls PSB-S, yakі mayut miraculous heat-saving power, budinok zavzhdi mother comfortable atmosphere for people. sip-panels are used with environmentally friendly zavdyaks like modern materials, like zastosovuyutsya during the hour of everyday life.

Panels can be resized according to commodities: from 120 to 224 mm. The standard dimensions are 1.25x2.5 meters. Sandwich-panel shutters are no more than 7 meters.

Video about the construction of a frame-panel booth:

Advantages and shortcomings of frame-panel houses

Like in any other technology of everyday life, here it is possible to look at both its positive and negative sides. Axis most important:

1. Mindfulness. Frame-panel booths Mayut such a design, that it is practical to wear all the її elements and gardening, and recognition. That's why it's superb in life, they have a chance not to collapse in the event of an earthquake. Everything is simple: the construction is zhorstka, and the vaga її is insignificant. The sip-panel is glued together monolithically and building vitrimati is very important.
2. Durability. Pіnopolіstyrol is a superb and durable material that should be brought to the forefront. Zbudovani z new budіvlі successfully operated for more than 40 years. Dosledzhennya will show that the stench will be in a good station, conducive to life, that after 80 years.
3. Saving energy. When the houses are looked at, it’s already warm, so you don’t need to spend stained koshti on the scorching system. Tsі budіvlі good to endure colivannya temperatures vіd -50 to +50°С.
4. Ecology. Pіnopolystyrene is a hypoallergenic material, from which food containers are made. This is a clear confirmation that wine is absolutely safe for people. What is the cost of OSB, then there is a small amount of glue (up to 3% for the plate), it can be negatively neutralized in the process of pressing. For a globally accepted classification, a sandwich-plate is brought up to category E1. In addition, these are frame panels for housekeeping hostile middle flowers for winemaking.
5. Vognestіykіst. All materials, which are victorious for the life of frame-panel houses, are reviewed according to the essential GOSTs and classified as low-flammable and light-duty. Well, if a sip-slab is to be blamed for the fire, it will go out mittevo. In addition, there is a non-toxic night of fire.
6. Price. Wooden panel booths are much cheaper than others. Tsomu є kіlka explanation. Perov - sip-panels with the power of the lungs, which require an expensive foundation. On the other hand, cranes and other similar equipment are not used in installation; There are also vouchers for the payment of labor costs, even 4 individuals can induce houses to finish the meal. In addition, sandwich panels create an even structure, so you won’t be able to reverse logs and walls for internal improvement. Installation can be done even if it's warm outside and if it's cold.
7. Shvidky montage For washing the robots, 5-6 workers in wooden panel booths are built in a month, and approximately in a turn you can move into the booths.

Those are the main ones. Ale tsey looking around is incomprehensible without clarification of their shortcomings, about yakі dotsіlno rozpovisti:

1. Ventilation. Frame-panel booths seem to have a special, built-in, well-thought-out ventilation, otherwise it will be suffocating in the middle of the accommodation.
2. Planning. By itself, the planning of such houses is not bad, it’s just that there are not enough options. And it is impossible to go beyond the framework of the standard planning, therefore, the same propositions for optimizing in the form of substitutes are not accepted.
3. Non-meanings of the term exploitation. On the right, in the fact that the life of frame-panel booths began not long ago, in the 50s of the twentieth century, and in us it’s only on the cob of the twenty-first century. For reasons of reason, none of them can sing-songly, how many can stand a similar construction.

Also, skeletal facsimiles can be both positive and negative. However, there are more of the first ones and the stench of the situation, so we can boldly recommend this kind of life for today's calm people.

Video with the process of mounting a frame-panel booth:

Vidminnosti between frame-panel and frame booths

Many people confuse and understand what is fundamentally wrong, but to talk about two or two that are close to one to one, but other technologies of everyday life. Let's get it straight from the slanderous: the insults are seen as budinks are grounded on the frame principle. However, their designs are not similar to each other, so the houses are chosen and operated differently.

Let's look at the difference between the frame and frame-panel booths more details. The first to roam on the basis of the militar frame, to which to fasten all the warehouses right on the budinka maidan. In the same place, see through and install insulation. What is the cost of the walls, during the process of folding they are made with a special material, which is to break up the houses from afar, resistant to the infusion of water and bet. Framed booths are famous for their thermal insulation. Yaskravim representative є. The axis is one more house of rice: the expanse of the middle and the ring of the house can be decorated as usual, for example, with a tree or with great trellises.

Also, the main difference between two types of budinkiv is the technology of virobnitsia. Skeletons are being prepared without intermediary on the budіvelnіy dilyantsі, and at the entrance with frame-panel booths, there is no more room for folding already ready-made sip-panels. These sandwich panels are produced at the factory, at a specialized workshop for standard projects. Insulation of the panels is also carried out beyond the borders of the hutch, on the vіdmіnu vіd frame budіvel. Frame-and-panel booths are taken a little more quickly, they cannot be individually designed, and frame ones can be customized according to your needs. In addition, the manager cannot control the quality of work from the preparation of sip-panels, they do not allow it to be made. And the axis of the life of a frame booth is seen in the eyes of the first to the rest of the hvilin.

Frame-panel technology - the future of everyday life. Vaughn may be impersonal non-transparency, yakі є super relevant for the inhabitants of our country. Vikoristannya in the life of sip-panels - a good way to quickly remove the acidity warm booth. Cream of that financial benefits, as if they look at the building of a similar booth, there will be more lower deaths, they will be hired in equal proportions for living, which will be built for a different technology of everyday life. І do not happen to check for the end of the winter, to start working. This can be risked, otrimavshi as a result of your own judgment, naturally, in advance of the analysis of the pros and cons and the confirmations of the choice. Frame-and-panel booths have long been stalking American and European lands, now it’s our turn to appreciate such a pidkhid before budding.

Panel booths are known to the skin Russian for numerous rich overheads in the sleeping areas of the city. Through not a high quality of everyday life, it was possible to reach the skepticism of the spozhivachs to the tsієї technology. On a thought, panel technology is only stuck in the rich overhead life of a budgetary life and does not give the opportunity to induce warmth and beautiful booth. Let's hurry up to change you. panel booth- all modern, warm and in rich vipadkas construction, which is easy to build with your own hands.

Competitive Promoting Technologies of the Swedish Building Industry

Let's talk about three technologies: "sip panels", three-ball concrete panels, KA-panels. Variation of life of a box of a single-surface booth of 150 sq. meters from the choice of the project to manage:

• from sip panels - $ 8.5 thousand;
• from trispheric concrete panels - $ 6 thousand, the term of the box link - 10 days;
• from KA-panels (collar panels, what they carry) - $ 7.5 thousand, a guarantee of 120 years, the term of life - 10-15 days.

The refurbishment of the technology of life is proponated at equal prices for the life of the box house. The skin has its own peculiarities, advantages and shortcomings, like standing up with respect.

Trispheric concrete panels for budinka

Concrete trispherical panels are rich in respect of a larger superstructure in a blend with other technologies, which can be easily built. Zavdyaki warming up the booths is getting warmer. Through the empty core, filled with a mineral filling, the construction of the box does not create an advancing load on the foundation, with the construction of concrete structures, it is unequivocally mіtsnіsha and stіykіsha for the huts of sip panels.

The sale of proponated house sets for standard projects and with a veneered facade. Buying a ready-made kit allows you to pick up a box in 10 days, which means that in the middle it will be less expensive to repair the curtains and ideally match the walls. Zalizobetonna design may be high quality. With help, you can build high-rise houses.

Prior to the installation of technology, it is possible to determine the need for installation of various important day-to-day equipment. With this panel booth made of trispheric concrete, you can make your own photo 20-30% cheaper for a similar booth made of sip-materials. This is also a vagomia plus factor, which is acceptable for choosing the best way of life.

Video review of the life of the villages and the porch panels

Do-it-yourself booths from sip panels: advantages, shortcomings, design and installation supervision

The second variant of the life of a panel house is the transmission of sip-panels. Go about the good in the house of special wake-up panels, Prepared from pіnopolystyrene and OSB boards. For sale, there are typical construction elements, so you can zastosovuvat for the life of your booth, so ready house kits.

The Canadian sip-panel is technologically advanced to the bagato-ball sandwich-panels, it is broken up in Canada, which in advertising is often brought up a little about the Canadian houses. The Danish material, regardless of its lightness and crispness, the building material is able to withstand temperatures in the range of -50C to +50C, earthworm up to 7.5 points. A plate based on expanded polystyrene, for its heat capacity, saves heat 6 times more quickly, lowering the thickness of the masonry. Regardless of the porous structure, the sip-panel insulation does not burn.

You can easily make a house for any chosen project with sip panels with your own hands, for which you need 1-2 helpers. At the building, you can drink 3 days on weekdays of the box up to 3 months, you can carry out the installation both in winter and summer hours. The advantage of this type of budіvelny material is the lightness of construction, ease of installation, and the wide variety of typical projects, which can be chosen for building a cottage.

Іsnuє impersonal thoughts about environmental cleanliness of sip technology. Buyers need to self-assess the risks and learn about the materials about the two warehouse sip-plates: pnopolistirol and OSB. Offending materials є perevіrenimi hour and environmentally safe.

The purchase of a ready-made house set will help you get pardons from the project rozrahunka. Folding a booth for your own sketch of typical elements will cost less. As it is necessary to additionally reduce the varity, you can make a sip-panel on your own. Panel booth, indications at the video instructions, you can choose with your own hands short term. How to design booths, fold armchairs and complete installation is told by a certified architect at the video.

Video look at the technology of sip panels

Video instructions for designing a booth with sip panels

Video instruction for the preparation of sip panels

Video surveillance from the cover folding booth from sip panels

Budinok from KA-panels (Vekchel)

KA-panels or kaliarna panel, what do you carry - ce small panel material for everyday life of low-surface bundings from the term of exploitation up to 120 years. The technology was created in Russia and there are all chances for great success and the unique qualities of everyday material. The panels are produced by the company "Ecoterm" and are metal-reinforced with a wooden structure, as it is already handy in self-assembly and ideally suitable for folding a house with your own hands.

Advantages of KA panels:

• high resistance to atmospheric and internal vology;
• resistance to temperature differences;
• the panels do not rot and freeze.

The company's selection is located in Yekaterinburg, but the costs for the delivery of the house kit will be low. The advantage of KA-panels is the availability and comfort of one- and two-surfaced houses, cottages.

"Ecoterm" produces three types of panels: rows, hoods, lintels with 100, 150, and 200 m, according to TU 5284-001-24522523-2006. Virobnik proponuyutsya typical projects of houses, according to the skin, you can add a ready-made house kit. The middle life has a "key" with a cost of 1 million rubles (about $ 17 thousand) to 3 million rubles.

• panel booth "Harmony" (136 sq. m) - 490 yew. rubles, 1.53 million rubles "under the key";
• panel booth "Yerker" (240 sq. m) - 710,800 yew. rublіv, 3 mln.

• prepare the foundation;
• install metal directly;
• stavity kut and kutovі structural elements;
• install wall panels;
• fasten between them with plates and self-tapping screws;
• zrobiti binding of panels;
• to carry out pokrivelnі works.

Looking at the list of KA-panel installation jobs, this panel design option is more suitable for self-assembly. Just that shvidka folded, no doubt, є key feature given wake-up technology. This is a promising future material.

Visnovok

Buyers on this day have a choice, how to call houses, a cottage, garden houses with sip panels, KA-panels or reinforced concrete sandwich panels with their own hands. Skin from technology descriptions available for independent unit. Panels allow you to build a booth, similar to a booth from a profiled beam, but a bit more cheaply.