Yandex navigator is using GPS signal. Three effective ways to improve GPS reception on Android. Yak Carti vyznachayut, de vie know

⁰

Kishenkov geolocation - on the right, it is widened and the rest of the hour is silent. Current on all models of modern telephones є GPS-system. Ale, power is often blamed on her drive. For example, the stench of chirping, how to improve the GPS-reception on "Android" or IOS, in order to take more accurate information about the local environment, or better play in the game, as you will require detailed geolocation. Let's take a look at the problem, it's obvious that it can be solved.

GPS is a system that allows your smartphone to use navigation programs and determine your location, to encourage best option route to the city of recognition. Rooting on some of these types of satellites that are in space.

What's wrong with me?

GPS-navigation is won by navigation programs. At once, the stench helps to reach the necessary area without detailed information paper cards Mіstsevnostі otochuvannya otochuyuchih on the topic "Which far їhati far and where to turn?"

Navigate home without cash "Yandex.Maps" or "Yandex.Navigator", GoogleMaps and MapsMe. You can also find a pirated version of "Navitel" on the Internet. But the program can be old school release. In this moment, it’s good to lead you on uncertain roads and on the wrong side of the road. In addition, the program may be infected with a virus. Todi є ymovіrnіst, scho won "break" the system of your smartphone, and you happen to change not only the navigator, but the phone or the minimum firmware.

At the same time, the widest and most current models of telephones are IPhone based on IOS and telephones that support another system ("Android"). Their GPS wins over to a more sophisticated look - A-GPS. This function, which improves the speed of robotic programs during cold and hot starts, for other channels of communication (WI-FI, Stilnikova), and also improves the accuracy of positioning.

Situation, if the phone cannot connect to new satellites during the next hour of program notification. In this way, the vins work autonomously for the tributes, transmitted with the forward inclusion of these companions, such vins were connected. Hot start - if the companions immediately turn on before the robot. The stench appears on the screen of the program, or in a special depository of their robots and otrimannya data.

The first option to improve the signal

Ways to improve the GPS reception on Android or IOS are great. Rozberemo 3 naivіdomishі. First and ourselves in a simple way, how to strengthen the GPS signal, є vymknennya vidpovidnogo mode in the settings of the phone. For whom robimo comes the steps:

Turn on GPS (geolocation) and go into the phone setup.
We know the distribution of "Geodata".
Select the top button "Mode".
I'm going to see a window under the name "Method of manifestation".
We select the item "High accuracy".

The productivity of the phone starts to increase the accuracy. One hour yoga robots without recharging can change a few times. On the right, turning on the navigator will simply "take" the battery.

Another way to improve GPS reception on Android

Another option is folding. Then vin helps so very often, like the first. It is necessary to get a program to clean up the GPS data. After updating information about satellites, the navigation system is more likely to be better, lower earlier. But this option can not be used for some telephones through the inconsistency of the program and the model, the marriage is too small.

The most foldable, the most important method

The second and third, most convenient way to solve the problem, how to improve the GPS-reception on "Android". Wine is best suited for computer geniuses. The essence of this is to rework the system file, which controls the robot of the GPS system and the phone. Let's take it in order:

It is necessary to edit the GPS.CONF file, which is located in the system/etc/gps/conf folder, through special programs to give access to system files. Let's move it from the internal memory of the phone or to the SD card, so that it can be downloaded to the computer.
Changing the GPS.CONF parameters is done through the Notepad++ program on the desktop PC. And the phone is connected to the computer via a standard USB cable.
They gave you the need to change the settings of the NTP server, for the help of which you need to synchronize the hour. Ring them up next to you - north-america.pool.ntp.org. The record needs to be rewritten - ru.pool.ntp.org or europe.pool.ntp.org. As a result, it may look like this: NTP_SERVER=ru.pool.ntp.org.
Also, we will not enter additional servers without making any changes to them: XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin, XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin ://xtra3 .gpsonextra.net/xtra.bin.
Dalі nebhіdno virіshity, chi GPS-receiver vikoristovuvatime WI-FI to strengthen the signal. When entering the ENABLE_WIPER= parameter, it is required to put a number, so that it is allowed (1) or reserved (0) for a non-rotor connection. For example, ENABLE_WIPER=1.
The next parameter is the speed of the connection and the accuracy of the data. There is your choice of attacks: INTERMEDIATE_POS=0<—— (точно, но медленно) или INTERMEDIATE_POS=1 <—— (не точно, но быстро).
For types of data transfers, people who know recommend that you install a User Plane, which is approved for a wide transfer of subscriber data. Then in a row of programs it is written DEFAULT_USER_PLANE=TRUE.
The accuracy of the GPS data is monitored through the INTERMEDIATE_POS= parameter, in which case you can set how to handle all data and how to remove damage. If you put the sign "=" 0 (zero) after the sign, then the geolocation will protect everything you know, and if 100, 300, 1000, 5000 - you will see the bad guys. Programmers recommend setting it to 0. If you want to try it, you can beat it to death.
Zastosuvannya functions A-GPS, as it was said above, is supported or automatically turned on on all current outbuildings. However, if you still want the function to work exactly, then you need to set DEFAULT_AGPS_ENABLE=TRUE in the A-GPS acquisition row.
It is necessary to save the sub-bag option for the file and transfer it to the phone, after which it should be re-vantaged.

An important point: if you don’t want to work all by yourself for various reasons, for example, through nights, fear of evil in the system, then you can know the GPS.CONF file with the parameters you need and just copy it to your smartphone. You don't have to restart your phone anymore and turn down the GPS.

Why don't you use GPS on Android?

The problem has many other causes. Buvaє taka, scho does not work GPS on "Android" zovsіm (not vmkaєє, do not joke companions too soon). With this problem, the expansion of the system to the factory upgrades will help. Tse rush through the phone. In addition, the gadget can be re-flashed, or you can tell it to the practitioners of the service center, as they "dig" into the electronics and correct the shortfall.

Invisible part when buying a smart phone Android є GPS, vbudovaniya in the phone. This sensor allows you to use navigation programs, such as Google Maps, positioning services in order to correctly determine the geographical position for additional supplements and information. Prote, not all GPS sensors are the same, stench can vary in accuracy and capability. In some cases, the reason that GPS does not work properly is the hardware part of the phone, especially in quiet old outbuildings, in which the function began to appear in the past. Tim is no less, in our days of filth, either the productivity of GPS can lie in the system, installed firmware, or other problems that are easy to fix. We tell you how you can improve the GPS signal on your Android device.

First of all, change your mind, what GPS is marked on your outbuilding. Go to Settings - My local location, select the item Access to my geodata and Via GPS satellites.

compass calibration

One reason for GPS inaccuracies is an incorrectly calibrated compass. As such, I will take away the wrong statements about orientation, which can lead to problems with navigation programs. In order to fix it, you need to calibrate the compass of your Android device.

How to use A-GPS?

The main feature of a standard GPS-module is that it connects not only with satellites, but also with old mobile operators, which essentially improves the quality of the assigned space. When this function is enabled, the phone often cannot connect to GPS satellites on its own, and it is necessary for you to "Restart" to enter the same name as no more notifications. The problem is not with the Chinese telephones themselves, but with the A-GPS module itself, which the GPS counterparts have a copy of, that works. Let's figure out how to set up gps on android.

How do you know if A-GPS or GPS module should be installed on the phone?

If you have a phone with two sims and a Chinese version, you have 99.9% A-GPS capability. Ale schob at tsimu perekonatisya, you can go to the engineering menu. From the new beginning, the correction of the supply of the impractical connection with the companions.

To enter the engineering menu, you need to dial the next phone number: *#*#3646633#*#*. If the combination did not work, you can try to enter *#15963#* or *#*#4636#*#*, however, you may have a different menu type.

After entering the phrase, you will automatically use it in the engineering menu, and you will be prompted for the attack:

You need to move to the left, flipping the sides to the “Location” tab.

Now select the first item "Location Based Servise". If you have an A-GPS tab, please go further. Otherwise, this article will help you a little.

GPS setup for android

If you have an A-GPS tab, just go to it. You may be able to see something like this:

Adjust the alignment with your own, if necessary, adjust, appropriately to the screen:

As everything is spelled out correctly, you can turn one row back to select the "Location" items and go to "YGPS".

Here you can see that your gps module does not know the satellites, it’s better to know, but don’t get stuck through the wrong inclusion:

You need the "Information" tab. He carries out the main manipulations.

As you can see, the status is "UNANVAILABLE", and TTFF hangs on an eternal joke. Skіlki would not check, nothing will change.

The essence of the correction of the eternal search is to start the "Full" drop outside, and then, after 2-3 seconds, click on the "A-GPS Restart". Tobto. you throw off the hanging process to zero, wiping all the tasks by yourself, and resetting the module. Without compromising the standard configuration (incorrect), the module should know all satellites from a clean slate.

After 10-20 seconds, on the “Satellites” tab, you will hear the signals of the satellites, and through the pivhvilin the module will successfully reach them.

I searched for the 1st side of the booth, it was clear on the balcony, nothing was found on the other pivkul. On the road, know all the companions.

Don't you need a GPS on your Android for a long time "shooking and knowing satellites"? Accuracy roztashuvannya higher than 10 meters? Did you think that "does GPS really work that way"? Nothing of the sort. Your GPS can be accurate +-5 meters or even better. I will tell you how to reach. And more than any other "patches" or third-party and "hemorrhagic" ones in the "GPS utilities will speed up the satellites' signals and improve the accuracy". Everything you need to have with your device. Just "calibration" in there, enter "average" - obviously, the leather phone is calibrated individually. Is that virobnik here? In China, and it is necessary to calibrate there, de Vie yoga really wins. Below is the instruction, selected by me from different parts of the strings and revised, moreover, the parts of "safety of maximum accuracy", as I will check it later and add more, or navit without it, an hour. cold start "GPS, after restarting the phone, it was possible to bring it to less than 20 seconds, then replace 1-2 times before calibrating. When the first satellites are buried, it is less than after 3-4 seconds, and the" GPS "locked" (localization by satellites, if you stop blimat "GPS search" and then switch to satellite robot) - less than 10 seconds (up to 40 or more - depending on the accuracy of your smart phone and the visibility of satellites).
You can read about the work of both methods, to see which of them is more like you, here: http://vyacheslav.blogspot.com/2013/07/android-gps.html. I especially recommend the "method of calibrating a native GPS" (descriptions below) - it gives the same results, and it's better for me and better for the vikoristan.
The next step is to indicate what is behind the help of the program, described here: the speed of activation from the "cold" will become, after all, a little more. but more gemeroyno, and through її "deep penetration into the Android GPS system", you can "kill" the calibration of this "native system", about as below. Plus, everything that needs to be done with її help, before the skin inclusion of GPS, it’s really better to launch z її vikoristannyam, lower in the option, which was included in this note.

Added 30/08/2013. before the cob of calibration, look at this note and try out the procedures, as in the description: http://vyacheslav.blogspot.com/2013/08/gps-android-jb-411-cink-king-gps.html . It is especially important if you have serious problems with GPS, such as "it's already badly trim satellites" and "lok" "falls" with the least weakened signal, plus the next GPS will "trimat" more satellites one hour, so improve stability and accuracy. . Without these procedures, I could not "bring back to normal" GPS pid JB 4.1.1 Cink King. After that, wait for the calibration of the methodology. written below in tsіy zamіttsі.

*pokhili font points are seen that are necessary to attain the theoretically possible accuracy. Points in pokhili font can be omitted, It is possible to reduce the accuracy (actually by 2 times), it does not appear on the "cold start" speed.
**Before the procedure, enter the code of the engineering menu of your device - you will need the VIN.

GPS accuracy, and especially the speed of "drying after a cold start", even lie down depending on the accuracy of setting the hour on your device. Sound at all stand at the nastavannya "Date and Hour", "Synchronize the hour according to the measure." I had the same. Ale, how did it work, with this machine, for setting the hour, the operator’s style signal, which in some cases can give the accuracy of setting the hour higher + - a bit of whilin, and in my case (Kiev, Life oparator) giving insight into the real hour 3 cylinders . Zagalom feces, and not "signal the exact hour." Even if you don’t live in the countryside, you’ll need a lot of batteries, and you’ll have a lot of money - neither in the apartment, nor in the metro, nor in the bus, nor in the office ... Well, you have understood.
To that turbuєmosya a little bit of the utsanіvkoy of the best possible hour. For this, I installed the ClockSync program without cost, the star axis: https://play.google.com/store/apps/details?id=ru.org.amip.ClockSync&hl=ru you can also take the star: http://4pda. ru/forum/index.php?showtopic=171610 . You can also use the method, as I described here: http://vyacheslav.blogspot.com/2013/07/android-gps_12.html - it does not require the installation of additional programs, but it requires manual editing of a number of system configuration files.
Dali, vyznaetsya with the reference server of the exact hour, which will be victorious. It's important, if the wine is closer to you, and if it's an hour to ping to the new minimal. For the beginning of the address "pools" - for Ukraine ua.pool.ntp.org, for Russia ru.pool.ntp.org. If you are in another country, look here: http://www.pool.ntp.org/ru/.
Now the terminal is launched, and in the new command "ping ua.pool.ntp.org", and we look for an hour. Robimo ce times 10 - I'll try to get out to the "pool" drop-down server, and ring until the next. For Ukraine, the hour of "review" for different servers is called from 5 to 60ms (by land), which is already talking about Russia with її rozmirami. Vidpovidno vipisuemo IP address of the server, the hour of the search for such a minimum. Yogo and vicoristovuvatimemo.
Run the installed program ClockSync, Menu > Settings. The first item is "NTP server". I will write down the IP address. Then check the box "automatic synchronization", then select "Interval". If the interval is "less - more often we pass synchronization, but if "a little traffic and a little battery", from the other side, my device for 3 years "goes" as much as 160-180 milliseconds ... tick "exact interval" - you can not put it - save the battery a little, I specially put it. "High accuracy mode" - put it, then more synchronization and other time through the data transmission with a more unstable speed (you can not put it - the accuracy is lower, then it is true decrease battery power during synchronization) We also set "set the time zone",
Apparently from the menu, click on the "menu", and select "synchronize" - just like your device is "past the hour" can be seen on the screen. So, in the menu you can update through the doba you can look at the date of your device "sleep/sleep" for doba (mіy Fly IQ 450 for 9.21 sec per day).
PS automatic synchronization is possible only for an hour on a "routed" device. If you don't have any rules, there is a "manual mode" program, but the accuracy will not be the same.
Note - added later. There is also another way to accurately synchronize the hour, without installing an additional program, I have described it here: http://vyacheslav.blogspot.com/2013/07/android-gps_12.html. After matching the results, I have chosen the very method, but I have to do some editing of the configuration files.
Also, if you have rooted the device, edit the /system/etc/gps.conf file. And itself, in the first row, after "NTP_SERVER =", replace the "default" one there, for a larger version for your country - for example, for Ukraine on ua.pool.ntp.org, or you can type in the IP address assigned earlier, otherwise it will be less universally and sometimes threaten with crashes, as a specific server is not practicable, then ua.pool.ntp.org is more universal, then IP addresses in this field can be even more accelerated cold start cold start. You can edit for help "Root Explorer".
We got it right. Dali.
Let's go to the phone. Roztashuvannya. Significant points: "According to the coordinates of the border", "GPS satellites", "Additional data", "AGPS", reshta "for relish". now we go to the item "Parameters EPO". "EPO" vimikaёmo pіd hour calibration. It's all here.
Launching Google Earth , in the settings, we switch yoga, so that we show the coordinates of the format, degrees and chastok. Shukaєmo near the place, where we carry out calibration. Tse maє buti dosit vіdkrite mіsce, for example, area. We choose the point to be worth while calibrating (choose an example, so that we can get right into it later), point the cursor at it, and record the coordinates to the remaining sign. The preparations are over - let's go "by the field" :) with the phone.
Yakscho vikoristovuvali p3- We get EXACTLY to the point, as previously chosen. Run "root explorer", go to the folder / data / misc, see the file mtkgps.dat. Get the latest AGPS data - for example, through the GPS Status program (menu>tools>AGPS data>Get). We check the hour, for example, with the ClockSync program (it’s time to check it, we marvel at the typical changes, and then we timidly synchronize it - as if it were done by the program and take it - div earlier at the article about calibrating the hour). We go into the engineering menu, LocationBasedServices, select it in the GPS menu, and press the GPS button (it will change from OFF to ON). Let's go to "View". Check for the time being "fix" appears (stop blinking the GPS indicator), and then no less than 2 whilins. Therefore, click on RefPosition, and in the end, write in the coordinates that were previously written in Google Earth "for the point de Vee, carry out calibration (there will be zeros). Click on "OK". Again, go to the View screen, and check if "fix" is not less than 2x whvilin , more for the good 5. Looks like back in the engineering menu. They didn’t beat p3 like that - just choose whether to finish the job. Wijmannia- do not try to work on the calibration on the balcony, or "out of the window" - only work harder.
**** Before calibrating, you can also check the correctness of choosing a SIM card for AGPS - if your style operator is "buggy", and there are two or two operators, then you can choose a smaller buggy one, in order to use the same number of applications as "glitchy", you can speed it up to the GPS robot, or else "revive" the "unpractical get-pure GPS" procedure is described in the very end of the note.
Go to the "Engineering menu"(For my FLY IQ 450 and many Chinese clones, the code is *#*#3646633#*#*, whichever you dial there, dial the phone number when calling, you may have a different one). Know "YGPS location" and start. Trim the phone vertically.
Go to the Information tab. Press the "Full" button.
Go to the tab "Satellites", check if at least 5 companions show up (better more - I had 11 when they were fixed), and after that, if the stench "show up and turn green", check more at least 2 hvilin, utrimuyuchi apparatus unruly - more will not be - only shorter). This is the first calibration. I won’t have a hvilini 3, but other deyaki aparati for vіdgukami can take і until pіvgodini.
Idemo to the item Information", embossed "Cold". Dali yak at 8. Point 9 is repeated 3 times. You can do more.
I'm new at Information. Tisnemo "Warm". gave like in item 8. Repeat not obov'yazkovo.
I'm calling in Information". Tisnemo "Hot". Dali yak at p 8.
Yakscho Wee vikonuvali point 3, enter the engineering menu, select "LocationBasedService", go to the "View" tab (forget to activate GPS as described in step 4), and check until the maximum satellites are displayed. Minimum 7, more often more (which is more, more accurately calibrated), and after that, as a maximum, check 2 more times. Why go to the tab GPS, and embossed "RefPosition". You have two numbers, for example, that you previously recorded vicorist Google Earth, they stink, more for everything, thousandths. Correct the insults that you wrote down earlier in p3. Tisnemo OK. Now let's go to the GPS tab and check 5 hvilin that the phone is not disturbed. Axis here - chim dowshe - tim better. The GPS program, otrimavshi real coordinates, porіvnyuє їх з timi, scho "go with her" and make corrections. їх clarifying. Below, in the evening, sing the lichnik to the "process" and data, as the hour changes from hour to hour.
Apparently from the engineering menu, reboot the phone.
Mustache. Radієmo spriti and accurate GPS.

After following the exact instructions, the actual position accuracy (calculated for google earth and not the one shown by GPS itself), added ~ 2.3-2.5 meters (GPS showing accuracy at 5-6 meters in status), with "visible" 9 satellites, і 8 meters (GPS showing an accuracy of 10.5 meters in the status) with 7 satellites visible - the satellites collapse and are not brought to the senses every day.

PS If you choose to victorize the program as described here: http://vyacheslav.blogspot.com/2013/07/android-gps-6.html, then check what you need to calibrate after installation. І at the time of uninstallation - calibrate again - throw off when uninstalling the calibration data, and the GPS is re-started "shook satellites for a sprat of whilin". The interest in these "slowly" data VRODI B does not go into calibration, but I don’t have any sense - the price for swidkistyu is "in the midst of a statistical change." And yet, it’s real, the accuracy is three times better, with fresh gains and danim (more than 20, but also at the margins of the statistical error in essence). Also, keep in mind that the advancement of this data of the most important programs is getting old, and in a day or two, the GPS is already galvanized and the accuracy is reduced (it is equal to just normally calibrated similar to the method described in this article). Plus, I її znіs nafіk :) More is not necessary in the first place, but in a different way you can take "GPS as it does not show anything" with it, as if you forgot to take new data. Navite akscho You have pressed the button "remove zavantazhenі data" and do not start the program itself. Once it happened to me, it happened to me - I didn’t become a rake once again.

PPS There are a few things that "enable EPO data" (GPS specific data for MTK chips) to give the device a faster "cold start", change the number of "companions who are crying". Tse hardly. The number of hooting companions is signified by their "a number of heads above the head at a given moment" and height above the horizon (near the city, which cannot be seen above the horizon itself). Ale, all the same, when calibrating її, it’s better to turn off. І vykoristovuvaty only as you see in the place, de іnet might be inaccessible. Todo won't give you a really quick start (they will take over the data for a month in advance). In a particular situation, the AGPS only are more colorful - these data are fresher and apparently more accurate, so the speed of the "start" is typically higher.

PPPS Below is the "reference information" for those who get the device, with the GPS not working at all. Varto її reverify - the reason may be in the fact that you have entered in the setup in the vіdmіnne vіd below:

In the engineering menu, in the LocationbasedService item, in the AGP tab S:

Guilty buti enabled Enable A-GPS, MSB, User Profile, SLP Template - GOOGLE, supl.google.com, 7275, TLS Enable, RRLP, IMSI, K-Value.
Horizontal Accuracy - 22, Vertical Accuracy - 0, Location Age - 0, Delay - 0. Location Estimate selected.
*********Select SIM cards for AGPS
Go to the NET tab - select - click on the map (Map tab), there may appear addresses for which you know, or it’s close to new. Tezh robimo z . Possibly, more precisely to your real position, and on the AGPS tab, select a SIM card.
On the AGPS tab it's pressing
So, as if from the PS that was rebuffed into this PS, it was changed to fix your device, or if you changed the SIM card, until you have AGPS bindings, you need to calibrate for a new one.

PS About the injection of accuracy in the course of the year for an hour of "cold start GPS".

From the "unhandled place" - a balcony, everything is blocked by concrete to the beast, the door-well - the houses from 4 sides, the sky is "shmatochok to the beast", the ice is visible 4 satellites (the ice is then visible 3, and the 4th one appears or disappears). phone number of calibrations for the methodology, which was made higher (before the calibration, there was no suffocation in their minds). Anniversary "stops" at ~160ms (2 years have passed in an hour of calibration by the ClockSync program). Hour of "cold start" ~ 250-300 s. After primus calibration with the ClockSync program - an hour of cold start ~ 100 sec. Vtim, mind you. for some GPS, it’s not a perfect sound, but it’s good to illustrate the accuracy of the year’s course for an hour of a “cold start”.

PPS For boosting the AGPS data collection, for example, as you are far away from the city, they were stinky - like they went 200 kilometers for fishing/repairs, etc., and the AGPS data booths became irrelevant for the start, which can be negatively recognized at the "cold hour" .

You can tweet the program "GPS status" axis zvіdsi: https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2&hl=ua. Launch the program. Zliva at the bottom under the "coordinate stake" - AGPS date in years. Press Menu > Tools > A-GPS data. Let's "zavantazhiti".

Navigation systems for mobile outbuildings() The rest of the hour became necessary not only for motorists, but also for pedestrians, the bells and whistles of good building will be on the way.

Ale to make a lot of money for the short-stayers to get stuck with them, which is not working, but the GPS system is nasty on Android.

You can look at problems different type, what to lie down in the form of the one that itself called the breakdown

Appointment

What is GPS? Tse navigation system - strictly seeming, GPS/GLONASSє navigation module, which allows you to create an impersonal add-on to win navigation.

Faults

But in some cases, the robots of such a module may have other problems. The nature of their differences, but the stench, however, is respected by the practice of the system:

Povna impossibility to sign a roztashuvannya;
Inaccurate designation of roztashuvannya;
More updated data, or more daily updates (for example, you move in the open space, or you grow up, and the observer on the map does not change its position for a long time).

More problems can occur independently after an hour of restart or moving to another zone of the card.

But if this doesn’t happen, it’s necessary to know what the viklikans stink and how to eat them.

Possible reasons

Viklikati problems of this kind can give a lot of reasons. But they can be divided into two great groups - hardware and software failures.

We talk about hardware problems only if there is not enough moisture in the physical navigation module, and about software - if it is incorrectly configured in the software security of a smartphone or a tablet.

Important! Malfunctions of the software type are enough easily nalashtovyutsya and usuvayutsya independently. If you are talking about hardware failures, it is better to trust the right service center, so that for fakhivtsya the repair process can be completed. І є risik aggravate the situation.

Hardware

One of the biggest problems is caused by the first launch of the module, then if you are running a program that uses GPS on a new smartphone.

With a stretch of 15-20 hvilin, geolocation can be worked out, nothing can be cleared up, no locality can be identified.

At the first start, it’s normal, but then it’s not guilty to repeat it again.

Such a situation can be blamed for that turn of events, as you went through a significant transition, for example, moved to another country or region, with the use of a navigation module.

In his mind, at the first start-up in a new place, he also needs an hour to “think”.

The malfunction may occur at some point and when starting at high speed, for example, at the first hour of driving by car - in this case, the “galmuvatime” module is the first hour after being turned on.

Take care that in the houses itself - navigation in the middle of the accommodation is not possible.

Your special place of roztashuvannya in budіvlі vyznaєetsya for the help of roztashuvannya of the zones of the wireless Internet and the towers of the telecom operators, but not GLONASS.

Software

The GLONAS module can be enabled through the phone settings, often on newer models it does not turn on for locking.

That's why there are a lot of newbies, because they didn't sound victorious android, don't turn on yoga before the cob of the vikoristanny program with navigation.

To the point, this type is told about those who need to turn on navigation.

Inaccurately, the definition of the locality depends on the features of the zone. Not in all zones the system works well, however, due to the peculiarities of the work of the companions.

Є blind zones, if the navigator skips, or it does not indicate accurately. It is impossible to fight against cym.

Usunennya

Usunennya problems, as a rule, will forgive.

And yet, after all the re-experimentation of the visits, the problem did not disappear, it is possible that on the right in the malfunction of the module and help replace the service center in the minds.

Hardware

There are no ways to launch the program after the first launch of the navigation module.

Koristuvachevі need to just get around 15-20 minutes after the first launch of the program - for the next hour the electronic warehouse of the navigational outbuilding will be adjusted to the current workflow and the mission will be recognized.

Even so, after buying a phone, it is recommended to run this module to fix it, so that you don’t check the situation, if you need a term.

Software

It's easy to access navigation on smartphones. Most of all, the program "requests" itself, so you turn on navigation, it's turned on.

Then you need to click on “SO” or “OK” at the window, and the program will turn on geolocation itself.

Since such a notification did not appear, I will manually note it after the algorithm:

1 On the unlocked screen on the desktop, hang the menu, zrobivshi kovzny ruh vіd upper cordon screen down;

2 The menu with the main settings will appear- have a new icon Geodata / Geodata transfer / Geolocation / Designated distribution or etc.;

Yandex navigator is using GPS signal. Three effective ways to improve GPS reception on Android. Yak Carti vyznachayut, de vie know

What's wrong with me?

The first option to improve the signal

Another way to improve GPS reception on Android

The most foldable, the most important method

Why don't you use GPS on Android?

You may like:

How to use A-GPS?

How do you know if A-GPS or GPS module should be installed on the phone?

GPS setup for android

PPPS Below is the "reference information" for those who get the device, with the GPS not working at all. Varto її reverify - the reason may be in the fact that you have entered in the setup in the vіdmіnne vіd below:

PS About the injection of accuracy in the course of the year for an hour of "cold start GPS".

PPS For boosting the AGPS data collection, for example, as you are far away from the city, they were stinky - like they went 200 kilometers for fishing/repairs, etc., and the AGPS data booths became irrelevant for the start, which can be negatively recognized at the "cold hour" .

Appointment

Faults

Possible reasons

Hardware

Software

Usunennya

Hardware

Software