Pidbіr steel radiators scorched on the square. How to pick up a scorching radiator behind the square, vrakhovuychi kkd batteries. Koriguvannya can be like this

⁰

Rozrahunok radiators scorched - the manager is superbly important. Incorrectly selected batteries with an insufficient number of sections can not heat the living quarters with a proper order. More sections, lower required, brought the opal system to a non-economical level.

The current market has a great selection of opalizing accessories, including designer radiators. Batteries of water scorching are invigorated by the material, heat loss and the intensity of heat transfer. Before that, as a residual vibe, you should specify the parameters of the life - let me not have mercy on the cherry food.

Question: “Yakі radiatori central scorching most effective?” not directly, because in this context the word "effective" means different speeches for different clients. It is possible to confirm that all radiators of the central scorching are nevertheless effective, the amount of energy that is supplied to the radiator, more than the amount of heat that is seen. In other words, all correctly working radiators with the same heat output give the same amount of heat one to one and win the styles and energy.

Radiators - tse judges, recognized for the generation of energy in the sight of heat. The amount of heat that you see is stale in the amount of energy, you see the stench. At the nutrition “Yakі radiators of the central scorching є most effective?”

See radiators

Modern apartments have victorious radiators made of the following materials:

steel;
chavun;
aluminium;
bimetal.

Behind the constructive powers, they are divided into two groups:

panel;
sectional.

Picking up batteries, it’s important to know the next step:

The intensity of the scorching accessories of the shoes may be consistent with the heating standard: per square meter of application, which may be one ovnishnyu wall that vikno, may fall 100 watts.
30% to razrakhovannoy pouzhennostі add, yakshcho two walls ovnіshni and two vikna.
5-10% is added to sweating, so the windows go to the pivnіchnu side or the radiators are installed in the niches.
When zbіgu zaznachenih more factors vіdsotki pіdsumovuyutsya.

What kind of radiator sees the maximum amount of heat for the world? Which radiator found? Which radiator is less expensive? Which radiator heats up faster? It is lower to induce health factors, as it is necessary to insure in case of health problems on a higher level of nutrition and safety correct victoria radiator for specific needs.

This surface area determines the maximum heat output of the radiator. The more surface area, the more potential thermal exhaustion. The surface area will be significantly reduced due to the size of the convectors, fins or hanging and ceiling panels. When looking at one model of a radiator, as a rule, a larger radiator means a larger output of heat. However, it is not obov'yazkovo bovaє with the same model of the radiator z іnshoy - for example, steel against aluminum.

Razrakhovuyut in front of the number of sections, as well as the type of scorching batteries, focusing on the area of application. However, the presence of high steles will not give correct results. If it’s a stone of standard height, then it’s easy to finish the calculation. As it has already been said, one "square" requires 100 watts per year, so it's easy to spoil, how many sections are needed in order to warm the room.

Vmist drive. Theoretically, the less you run the radiator, the less time it takes to heat up, and the less heat you need to reach the full temperature. Also, if you put the lower one in the radiator, then the “efficient” one can be taken into account. However, there are few differences between the water and the water in the models of radiators, and whether or not the efficiency here can be reached only by replacing steel with aluminum radiators.

Design The shape of the radiator of this design is to be injected into the amount of heat, as it is not viable, but again it is connected with a specific area of the surface of the model. For example, a tubular radiator with empty pipes can be loaded great area surface, lower flat construction without ribs, shards can heat up as a sound, as well as in the middle of the pipes. Thus, the design of the radiator directly contributes to its maximum heat output.

For example, the area of the room is 25 m2. Multiply this figure by 100 and take 2500. Tse means that 2.5 kW per year is required for heating. This result is subdivided by the value indicated in the documentation to the radiator - the amount of heat, as one section is seen.

So, as we know that she saw 180 watts, then we work like that; 2500 dilimo for 180 and exit 13.88. When the result is rounded, there will be 14 - tse and є number of sections of the opal fitting.

Material The material of the radiator core does not directly affect the amount of heat that is seen. However, the material will be the primary factor in the dryness, in which the radiator heats up and reaches. For example, aluminum heaters are hot and cold, while chavun heats up more and cools down more.

Koriguvannya can be like this

It is based on the principle that it is like "viprominuvalna building", which allows experts to control the building of heat and flood the surface of the object. Rivnі vіpromіnyuvalnoї zdatnostі zmіnuyuyutsya between kіntsami radiatorіv. Pofarbovani radiators can be more high rіven of industrial building, low bare metal radiators, which means that the shoveled pokrittya tarnish and see the heat more than the lower bare metal pieces. Matte trims can be more high rіven vpromіnyuvannya, nizh glossy radiators.

Obov'yazkovo is necessary to protect the heat. Kutova kіmnata but that, in a yakіy Д balcony, naturally heats up more, and the heat is warmer. Todі rozrahunok roblyat іz stock no less than twenty vіdsotkіv.

How to choose the right scorching radiator is marveling at the video:

The choice of any radiator is based on the designation of the amount of heat, as if it were possible to create a house near the apartment. Tsey pokaznik can be calculated different ways. That number is as simple as it is foldable. The simplest conveyor of the area and the appearance of the height of the place (although I do not take part in the calculations).

Standard picking method

You can stop it only once, if the height of the room is less than 3 m. You can implement it like this:

They designate the area of application. For example, won to become 25 m².
Multiply the otriman figure by 100 watts. Vіdpovіdno to BNіP tsya figure є norm. The document says that leather square meter can be set to 100 watts. To go out, what kind of heat can be set up 2500 W or 2.5 kW.
Otriman pressure is added to the heat output of one section of the battery. Tsey krok vykonuyut then, if it is planned to install a battery. As you can see, so vikonannya mayut chivun, aluminum and bimetal scorch attachments. If the battery has a section with heat output, which is 150 W, then it is necessary to bathe the attachments with 17 sections (2500/150 \u003d 16.6, rounded off on the larger side).

The situation is somehow different. The stench is a solid construction, it’s impossible to change it or change it. That’s why it’s worth the burden. Prote the installation of one great radiator with a power of 2.5 kW will be three times a breeze. To that, for these batteries, there is another way to rozrahunka.
Actual features of the standard method
Vyshchezakane stosuetsya quiet kіmnat, yakі mayut one zvnіshnyu wall, and the loss of heat in them is small.

However, if the application can increase the waste of heat, then the heavy intensity of the scorching accessories (ours has a figure of 2.5 kW) needs to be corrected.

Koriguvannya can be like this:

The increase in the sum of the bag figure by 20% in the case of a different room is the hood (that is, two walls are equal).
Increased hot sweating by 10% in different lower connection of the scorching battery.
Change in the total amount of heat by 15-25%, as a result, metal-plastic windows were installed near the room.

At the skin level, up to 2.5 kW, add or take away a large amount of water. Since all the facts can be misplaced, then the figure of 2.5 kW will turn into 2.625 kW. It is also necessary to install a scorching radiator with 18 sections.

More simple way

Vidpovidno to new for scorching 2 sq. m it is necessary to install one rib. Crimson tsgogo, to the zagalnoi kіlkostі ribs adding one more. How can I use an area of 25 sq. m.

Having rounded the number i, having added 1 to it, gain 14 edges. As you can see, the result is less number taken in the standard way.

Obviously, the presence of three ribs does not allow heating the room like a trace. Therefore, the whole method is better to win as an orientation. Under the hour of buying vikoristovuvati yoga as the main thing is not next.

Schob її vyznachiti, odnієї ploschі kіmnati zalit. It is necessary to know the height, as well as to set the number 41. Vіdpovіdno to BNіP, the scorching radiator is responsible for creating 41 W per 1 cu. m. As you can see, for the selection of a panel attachment, I will build a singed room, it is necessary to work for the obsyagi.

Simple algorithm:

Significant area.
Vyznachennya vow (I multiply the area by height).
Multiplication obligated to 41.
The final result is corrected on the basis of the visionary vision.

Pіslya otrimannya. You can install one hard attachment. Such an option is suitable for accommodation, de є one great vikno. If there are two, then it is better to use two panels with a heat output of 1.25 kW.

In the same way, pick up the opaluval outbuildings for the use of a wall that moves 3 m.