Do-it-yourself grounding in a private booth 220v: installation features, help and color

⁰

An important moment when cladding the hut is grounding at a private booth with your own hands 220v. This special attachment guarantees safety when using electric appliances, and also serves as a protection against short circuits. The need for a grounded vineyard is the hour of the supply of electricity to the living room. All possessions can be installed with your own hands. Please do not hesitate to add special recommendations inexpensively. Grounding can be used for two different meshes - 220 and 380 st. In case of another option, it is necessary to select a special circuit.

Organization of the defense of the booth

Grounding at a private booth can be done with your own hands. The Danish way to allow the introduction of a blukayuchi strum and the accumulation of congestion on the electrical installation of static electricity.

Installation scheme to the ground terminal at the shield

Related article:

For a minimum knowledge of electrical installation work and for the help of our ceramics, you can independently install the wiring at your booth.

The circuit protects baggers from electric shock. When shaving off the zero phase, the body of the electric power becomes a big problem. For such changes and transfers, the ground loop, which is the phase, through the electrician goes to the ground.

Core information! The attachment helps to change the risk of guilt, re-advancement, and also improves safety when working with different powers.

Attachment and principle of work

The ground loop is an extension of two subsystems: internal and external. The two traces are backed up by the rose under the shield. The other part is spread out on the street, and it is built up with electrodes, as if they are covered with metal plates and they dig into the ground.

In such an outbuilding, a metal tire is carried out, so that it comes up to the head shield. The principle of functioning of the design is such that when people come into contact with the electric power, the strum is directed to the ground not through the body, but through a special conductor. With this, you can work differently, see grounding at a private booth with your own hands. 380 in order to help a little bit of another approach.

Pristrіy zakhistu booth

For a person, the indicator of support is 1 com, and for the mechanism - 4 ohms. The electric strum chooses the most visible and simplest way to the earth, which is the lowest opir.

To the warehouse of the grounding outbuilding enter:

A grounding device is an element that sticks to the ground and causes the descent to break the struma. In private life, there are natural installations from a steel pipeline, a protective covering for a power cable and a concrete part of the foundation of a colony.
The grounding conductor is a part, like a conduit for an electrical installation and a grounding conductor.

There are three elements of the vertical type, as well as three horizontal smugs, like the vertical elements. The steel smuga vikoristovuєtsya as a conductor between a rozpodіlny shield and a ground loop.

During installation, two schemes are twisted:

Yak trikutnika to fight closed circuit.
Linear vykonuyutsya іz successively z'єdnah lintels.

A popular contour in the look of a rіvnofemoral tricot. Yogo roztashovuyut on the vіdstanі kіlkoh міv vіd foundation budіvlі. At whom a trench is dug, where the flood elements are driven in. We will then install smuga from steel around the perimeter.

Core information! A private booth has a better vikoristati scheme for a trikutnik. That's why it looks more efficient.

How to organize grounding in a private booth with your own hands?

How to work grounding in a private booth with your own hands: 380 or 220

A pit is created in order from everyday life, as if digging for help with a shovel.

At the bottom of the trench, a metal coil is mounted.

Before the construction, a rich housing profile is added and brought up to the shield.

For the creation of the maximum effect, a singing metal sound is created. 3-4 tufts are made for the help of a female of singing width. Crime of the main process is construed as such an important mind:

Potential indicators are being shown.
The voltage drops.
Installation of an attachment for automatic activation.
Zastosovuyutsya droti іz podvіynoy іzolyatsієyu.
Vykoristovuyutsya rozdіlov_ transformers.

Wimogi to ground: 220 and 380v

An important parameter for installation time is opir roztikannya. The meaning is important, with some kind of swidkistyu strum dolatime to the ground from the surface of the electric appliance.

The process of grounding helps to reach singing minds:

The length of the vertical parts must not be less than 16 mm.
Horizontal - 10 mm.
The thickness of the metal is not less than 4 mm.
The minimum cut for pipes is 32 mm.

Core information! In the electrical panel, the circuit is attached to a special bus, as it is covered with a special oil and polished to a shine.

Installation specifics

It is important to choose a place for the installation of an annex. In every place, the significance of people or creatures is turned off, shards can be brought to death.

Qiu zone needs to be resolutely protected, or close it, be it a boulder or a sculpture. Special rules need to be protected, grounded at a private booth with your own hands. The scheme of transmission of grounding stations, which are driven into the depths of about three meters.

Then the rods are cut 15-20 cm below the ground. Channels roam between them, where elements are invested, what to feed. For strengthening, zastosovuetsya zvaryuvannya. Contours 220v and 380v are adjusted to different values of the support.

Grounding and thunder

Thunderous attachment and grounding є two different speeches. Do-it-yourself grounding in a private vikonan booth 380v or 220 direct for the introduction of over-surplus electricity into the ground. Gromovіdvіd to introduce an electric atmospheric charge near the ground, but it works less when the glare hits.

What is fenced and grounded?

Vikoyuchi grounding, not varto robit such speeches:

Do not varto mount more than one metal rod. For yakіsnogo grounding, one or two trikutniks are needed.
It is not possible to select elements with a high width: channel bars or fittings. Through the surface, the stench will be more likely to contact with the soil.
It is not possible to work installation on a depth less than 1 meter lower.

Korisna's joy! Before that, how to bury the metal parts in the ground, it is necessary to make them with special protective coatings.

Vіdminnostі in zanulennі and zemlіnіnі

The grounding is strongly grounded in a private booth with your own hands 380V, the scheme of some kind of transmission is different in other minds. Zanulennya often zastosovuєtsya on virobnichih undertakings. Zanulennya zdatne zahistit less than a short flicker and do not rob the introduction of an electrician. In the butt minds, the function of the marne is similar. You can call it to burn out electrical appliances.

Core information! When installing, I will add a zeroing, following the locking of the mechanism for vimknennya equipment or intermediary voltage.

What kind of grounding kit to choose: prices and pickers

For the installation of a protective circuit at home and industrial minds, ready-made sets of possessions are made. Varto look at the upcoming pickers:

The most popular brewer is Galmar. Attachments for mounting on a depth of about 30 m. The cost of such an attachment is about 40 thousand. ruble
The products of "VOLT-SPB" lie before the vіtchiznyanyh virobnikіv. Installation depth can be from 6 to 30 meters. Price from 6 to 26 thousand. ruble
Universal outbuildings are provided by the Zandz company. The stench is mounted on a 10 m-code.
Ezetec kits are inexpensive. Can cost close to 7 yew. ruble
Stainless steel kits are manufactured by Elmast. Can cost close to 7,000 carbs.

Testing robots for practicality

After the installation works, the obov'yazkova re-verification is done. For up to one end, a light bulb is added to the circuit. The contour is broken up correctly, so that it shines brightly. Also, the practicality is changed for the help of the factory accessory - a multimeter.

Stattya