Replacement and connection of the lamp

The connection of lamps to the electrics, as well as the correct fixing to the surface walls or the steel, is the main guarantee of successful and superficial lighting.

In addition, given the correctness of the connection, the safety of all wiring to the booth.

Difficulties collide not only with the connection of lamps, but also with their replacements.

How to correctly and safely plug in or replace the lamp, peace be told to you below.

See the lamps for a safe connection

There is a great variety of types of lighting outbuildings. Briefly characterize them as follows:

• stele. They can be budding in a stele, or they can be a great hanging lamp;
• walls (sconces). Fasten to the wall, put all the necessary details in the kit. Explore zruchnistyu, practicality and mobility. Mobility is due to the fact that the wall lamp can be simply plugged in from the socket and transferred to another room;
• floor. Similarly, we will stele, but we will make them richer folding. Most often they win at shopping centers, elite offices and houses, where at the stage a similar system was transferred.

Under the light of the light, it is noted that on the vіdmіnu in the vіdmіnі vіd іnshі іnshih іnshі types, tsі lamps can't vikoristovuvatysya as the main light, and less at the sight of the auxiliary.

Connecting lamps to fall into the following parameters of the chandelier:

• the number of bulbs (with 4 bulbs їх, as a rule, they are subdivided into groups and protect the skin group with vimikach);
• type of cartridges;
• plinth type;
• the intensity of the lamp is important for connection.

Choose a place for connecting lamps

To replace that connection of the lamp, it is necessary to connect a yellow-green wire (grounding) to a terminal (written "earth"). If the terminal cannot be assigned, connect the wire to the 3rd socket.

Connect the brown wire (phase) to terminal L, and the blue wire to terminal N (zero).

How to connect a lamp-sconce

As if the wall is clean and there is no way out for a connection, it is necessary to create such a way out, knowing the dotik point.

The robots were carried out less if there was a lot of electricity. Gave a sufficient connection of the main wire to the already obvious wiring and attach to the wall of the sconce.

How to turn on the stele light

Tse zavdannya - one of the most complicated, we will look at this report.

First, what you need to be safe, tse place, where you need to fit.

Viber is not too wide: gypsum board or stretch fabric. The main stages of the necessary work for the connection of light-emitting lighting:

1. it is necessary to carry out electrical wiring, as it is your responsibility to insure the current connection points. If you don’t have mercy, on the stele you’ll see the next month, where there will be lamps. In addition, on the number of points of connection, the tightness is still added, otherwise, in the event of tightness, laying down a number of lamps is at your discretion. Before speech, it’s important not to forget that the intensity of the light is not guilty of overexposing such a heat, when the lamp heats up to 60 degrees, as if the installation is in a tension steel. If the annex is to be installed at the bathing room, it may be necessary and forget about it;
2. in addition, as the darts are connected, and the stench is connected quickly, smut, so that the new threads give the necessary tightness, it is necessary to fasten the dowel-clamps to the drota to the surface walls or the steel;
3. at the canvas, where the outbuildings are built, there are signs of different types of roses;
4. all the luminaries are due to the midst of the rich-housing dart, which is the most reliable method (it is necessary to work before the installation of the stele);
5. after that, as all the electrical wiring is connected, carefully connect the extension to the wall. Depending on what is the structure, rozmіri and the method of fixing the lamps you have chosen, stale connection, prote, as a rule, everything is simple and loose with a zipper.

The replacement of the lamps, as they are installed in the stretch or under the bed, is more foldable, so all the work needs to be carried out on conscience. Remember that the lamps are not to blame, but they are too hot, so that it was not indicated on the stele.

You can also recognize, and increase yoga even more, we will accept it!