Independent connection of a thermostat for heating supply
Warming up the place for the help of heating systems is important for the most comfortable for people. Manage the stench for an additional thermostat or thermostat, to control the stages of heating the surface and again, and if necessary, to reduce the intensity.
The installation of this accessory is a wrapping, otherwise the heating system will heat up to the maximum temperature, but it will threaten the booth, concrete screed, finishing cover of the pipes, and the heating itself. And you can connect yoga for the obviousness of singing knowledge with your own hands.
Thermostat functions
The operation of the thermostat can only be done by installing a temperature sensor, which controls the intensity of heating of the surface or even more. The thermoregulator itself calls out to adjust the set heating parameters, turning on and off combustible elements at the same time.
In this way, the thermostat will not only overheat the heat supply system, but will also save the day of saving electricity. Even if the heater is turned on, it will only work at lower temperatures. No matter how high the quality of the controlling outbuilding is, in the process of operation, the scorching of the logs will pay off the savings on paying for electricity.
Temperature controller
Naygolovnіshe - follow the correct robot of the temperature sensor. Aje itself vin gives a signal to the thermostat about the need to turn on or turn off the elements that are heated. And that means that the stench does not overheat, which means to increase the term for the service of electric heating.
See thermostats
Raznomanіtnіst models of temperature regulators allows you to choose an attachment that meets the needs of the masters of the apartment chi budinka. Zagalom uses three types of thermostats.
- Electromechanical. This type of equipment is equipped with a mechanical switch, which allows you to manually set the required heating temperature. Such attachments are the simplest in operation and are aired with an accessible varity.
- digital. The versatility of such models is rich, and cheruvannya they are used for additional buttons. All information about the parameters that are set is displayed on the touch screen.
- Programming. These models are more expensive, to that, in fact, they are systems that allow you to set the necessary heating intensity for years, days or days. Some models are equipped with a remote control panel and allow you to control the work of the heat input through a personal computer.
The choice of that chi іnshgo I will add to lie down due to the financial possibilities of the vlasniks of the dwelling that is necessary for the functional.
Do not hesitate to give priority to the electromechanical option. As a matter of fact, more expensive models are hoped for, they can be placed in a special closet, or they can be blamed for intermediary use.
The thermostat is responsible for controlling the heat supply robot in one application. Connecting two rooms to one outbuilding is possible, so in this case, in both rooms, it is possible to keep the same heating temperature, which may not be comfortable. In this case, you can add a two-channel thermostat, which allows you to turn two circuits at the same time.
Thermoregulator THERMOREG TI 950 for heat supply
See thermal sensors
As it happened earlier, the temperature controller controls the heating system, according to the readings transmitted by the temperature sensor. I’ll build it to lie down, if the temperature itself will be raised by the thermostat - the intensity of heating the surface of the logs or again. Tse means that the type of temperature sensor should be used for the operation of the electric heating system.
To maintain the most comfortable temperature, sensors can be stuck. Moreover, in the first case, the sensor is guilty, connecting to the terminal that is placed on the thermostat housing. And the attachment itself, in fact, is an electric cable, at the end of which there is a control element. Roztashovuєtsya vіn mizh cable loops, scho grіє, on vіdstanі vіd stіni, scho become not less than 0.5 meters.
If you do the installation of the heat pads with your own hands at the screed, then the temperature sensor is placed at the groove, vikonan in the bottom, pulling it forward onto the new corrugated pipe. In this way, it will be easier to replace the process, and I will add it in case of a sudden breakdown.
The sensor of temperature control can be installed again at the places that show the singing minds:
Parameters for choosing a thermostat
The boundary pressure of the thermostat may be indicative of the tightness of the heat supply system. Most of the models are covered by 16 A, which provide 37 kW.
The most comfortable in vikoristanniy vvazhetsya thermostat іz dvadovanymi temperature sensors, prote most in the kit with these attachments, only one temperature sensor is supplied. If you want to connect with your own hands, it is identical, for a thermostat equipped with a temperature control switch, two less clamps.
When choosing, I will add the following respect for yoga type:
In the first place, for the installation of an attachment, a niche is needed near the wall, where the screws are located near the mounting box. Overlays of various kinds are fastened directly on the wall, but they can create an unpretentious, outward-looking look.
Installation steps
Having placed the attachment in the mounting box, or having fixed it directly on the wall, proceed until the grooves are drilled. Shtrobi need to work not only on the wall, but also near the bed. The groove can be one or a sprat. If there is only one strobe, then it is necessary to work wider, so that it is possible to place heat-insulating materials and temperature sensors in it. The leather was carried out in front of the corrugated pipe.
Installing the DEVIreg Touch thermostat
Dovzhina grooves, vykonany in pіdlozі, may become no less than 0.5 meters. She has one end of the temperature sensor, which should be carefully insulated in order to avoid getting into the aboology. I will add a thermostat to start the next time.
How to connect a thermostat: diagram
- Attach with a built-in sensor to monitor the temperature by checking the security of the terminals. Two of them are designated for wires, which go through the elements, which heat. With this, the brown wire is connected to the L (phase) wire, and the blue wire is connected to the N (zero) wire. The connection to the electric line is also carried out at the connection to the polarity.
- If there are 6 terminals on the extension, then the temperature sensor is not included, but is included in the package. In this way, the yogo pіd'єdnannya viroblyayetsya in roses, designated in the instructions of the virobnik.
- If the attachment may be 7 terminals, it means that one of them is recognized for grounding, so it is necessary to bring yellow-green wire to it. There is no such clamp on the attachment, and grounding in the booth, the connection is carried out by the enclosure. If there is no grounding in the booth, the sound wire will be nullified.
After connecting the device with a hand, you can test the system for practicality. About її correctness, check the clatter, which means that the circuit is connected. As if through a sprig of fluff, the combustible elements began to vibrate warmly, you can vimic the system and proceed to pouring the screed and laying the finishing coat.
Video: Installation and connection of the Devireg 535 thermostat
