Connecting a light line 220V to the edge

A light line is an accessory, which zastosovuetsya for lighting up in the middle of that call, the creation of decorative effects. On the streets, there are vicarious mills for decorating advertising signs, shop windows, facades of houses. Designers of the interior will put them practically in all rooms. Moreover, it is possible to create a fallow in the same way as a decorative one, as well as the main lightening of the application.

The connection of a light line (220V) can be turned on independently. For whom you need a great handy tool and minimal knowledge in the electrics room. Є k_lka features of such a work. Be familiar with them before connecting the lines. For the sake of the knowledge of the electricians, they will help to understand how to properly raise all kinds of things, and on the basis of food, it is necessary to give special respect.

Zagalna characteristic

A light line is an economical accessory. The rest of the rock її popularity stays on the most equal level. This attachment is made up of a flexible line, on which diodes are applied with a singing periodicity. The stench is making a different rosemary. The length of the line should be 3-5 m as standard. Vіd tsgo pokaznіnі, and also rozmіru that schіlnostі dіodіv dоіdіv on а basis tо lay tо аn аn thаnness оf аdnance.

Connecting a light line (220V) may have low features. You can't just plug it in with a plug and plug it into the mesh. Also a trace of vrahuvati, which today release a rich variety of representations of outbuildings. With the inclusion of this fact, the pose of respect is also not overwhelmed. Іsnuyut monochrome lines, yakі vpromіnuyuyut only one color. Tse can be white, blue, yellow, red green. Ale є bagatobarvni priladi. The stench of the building can be seen if it’s a kind of sight when singing only 3 main colors. Їkhnє connection vіdrіznyaєtsya in the form of monochrome varieties.

Perevagi

Before that, as soon as the connection of a light line to a measure of 220V was made, the next step was to find out about the success of this accessory. Nasampered here lie the economics of the presented element of visibility. With such a level of light flow, the average lamp saves an order of magnitude more electricity, and the CCD is significantly less. The term of exploitation of the diode accessory warehouse is 5-13 years. Yogo gnuchka basis allows you to create a be-yak configuration. With the help of light, it is possible to grow in important places.

Zavdyaks to the peculiarities of the connection are allowed to turn the candles. At whom the intensity of the light flow is regulated. Fallow in the class of insulation and extensions are installed in aquariums, swimming pools. Until then, with the choice of a viable type of possession, it is possible to create practically any kind of light. The variety of such outbuildings is available in full. Therefore, my popularity does not fall already richly fateful.

See the line

Crimean color light, lines can be considered for dekilkom by the main factors. Svіtlodіodi buvayut rіznih rosemіrіv. Today, most often they produce extensions with dimensions of 35 x 28 and 50 x 50 mm. Rosemary is indicated in the branded viroba (3528 or 5050). For the first one, the diode may be less flat, for that the lightness of the light is less, and navpaki.

The value of the maximum frequency, with which LED-elements place 1 m of a line. As a rule, there is a quantity between 30-120 pieces, it is used for 12V voltage. Tse mozhe but zonal or zagalne pіdsvіchuvannya, yak nadaє svіtlodіodna strіchka (220V). Connecting to the kitchen, living room, bedroom and other rooms can be built with such outbuildings. For 24V fittings, the number of LED elements is 240 pieces. Choose lines to lie down in the name of the annex. Single-bar devices are most often used for voltages of 12V, and RGB-additions - for voltages of 24V. Tse pov'yazano іz shіlnіstyu іodіv іn the meter strіchki.

Living block

A smutty rule, as it is used when LED-strings are connected, is similar to the binding block of life. This element of the lance reduces the voltage to enter, to a pleasant level, which means a specific light line (220V).

Do-it-yourself connection is easy to do. Vіd merezhі voltage to enter the block of life. On the line, it’s less than 12 or 24V. Without a block of life, the illuminator will simply burn out. If you choose which one, I will attach the tightness of all lines. With this block of life, the mother is responsible for a reserve of 20%. Only in this way osvitlyuvach pratsyuvatime correctly.

relieved tension

Іsnuє pevna scheme for connecting a light line up to 220V. After that, as soon as the voltage is set, depending on the specific application of the attachments, it is necessary to estimate the total amount of the saved electric power. Vіdpovіdno to otrimanogo result nabuvayut vіdpovіdny block zhivlennya. This display can be done on your own. For example, it is necessary to add lighting outside the perimeter of the room. For whom we will designate a long line for us. Depending on the required level of light flow, which is measured in lumens (lm), choose the appropriate type of stitch. He will have a singing number of svetlodiods. The frequency of the LED-elements is selected according to the size of the diode. Although the wines may be smaller in size, the concentration on the line will be greater, and on the other hand.

Butt rozrahunka

I’ll sing the technique of rozrahunka vikoristovuy before it, as if connecting a light line to the 220V line. The scheme for the completion of the procedure is given below. It is permissible, it is necessary to work the lighting of the stone along the perimeter. In this case, the length of the line is more than 18 m. It was decided to add more lights, the concentration of diodes per 1 m should be 30 pieces. Rosemary of LED-elements, 5050 were collected.

The leather element of the type presented is 0.02 A (the indicator is indicated in the preliminary tables). The intensity of the entire lighting fixture in which case is developed as follows: 0.02 x 540 = 10.8 A.

So, as for which I will add a power reserve of 20%, its nominal value becomes 156 watts. At the sale of such an attachment, you can booty. And with such a method, a block of 160 watts is used.

Connection to the living block

Connecting a light line (220V) can be done independently. The power block can be supplied with cords for connection, or it can be sold without them. At the first one, from one side, a wire with a fork to turn on the system in the measure, and from the other side - black and red darts. Possibly more marking. Її decoding є in the instructions. The red wire is “phase”, and the black and blue wire is “zero”. If you mix them up, the line will not turn on. In this vipadka, the darts are exchanged for misses. The connection scheme is induced far away.

If the block of life does not have darts, it can have clamps. Vіdpovіdno to іnstruktsії vorobnik darts vіdvod vіdpovіdnі zatiskakhі.

Connection without adapter

There is one more way to connect, which allows you to plug in a light line 220V (connection without a live block). This procedure can only be done by a professional electrician. In this direction, the adventure goes straight to the annex. The scheme of such a plant is victorious for the preparation of light bulbs. Likewise, two diodes are connected in parallel, as well as one to one, they can be powered from the jerel of the strum for three hours.

In order to get rid of the merekhtinnya osvitlyuvach, zastosovuetsya special attachments. Tse electrolytic capacitor C1 with a voltage of 300 W (capacity 4.7-10 mF). To eliminate the changing strum of the fence, it is also necessary to add additional attachments. Tse diodniy mist VD1-VD4. After starting the system, it is necessary to check the voltage. If there is more than the allowable value, add more strings, or solder a resistor or a capacitor in front of the diode bridge.

Newly needed block of living?

The skin maker is assigned as a visual element of the schemes of the block of life. Without it, a light line is not used. 220V (connection without a power supply is theoretically possible) for safety reasons it is supplied to the lighting fixture via an adapter.

On the right, in the fact that in the examined scheme, the soldering elements do not seem to be outrageous. Up to the bare bottoms of the system, you can vipadkovo dotorknutisa hand. With which blow, the strum will be the same, like a “phase” wire. Today, light lines appeared for sale under the name "Dyuralight". You can connect it without a life block. This scheme is indicative of guidance to a higher technology. Ale strіchka with whom you can find a special zahisnіy pipe. The blow with a strum is switched off.

Scheme of connecting RGB-strings

Rich lines of the RGB type can create different color effects. However, a special attachment is needed to manage the sights and their splendour. This is the controller, to which a light line comes (220V). The connection with the remote control will be more convenient. Therefore, in the most important, the controllers let out such a function.

For the connection of the system, a simple scheme is installed. On the back to the block of life, a wire is carried out with a fork. From the other side, a controller is added to the circuit. Until the next for help, soldering or connectors come to the darts of the line. For dermal protection cables of the system in a new one, there is a seal. Vіdpovіdno to їnstruktsії roble clumsy installation.

Wiring diagram 2 lines

Having looked at the connection of light lines (220V), you should pay attention to the scheme with two such lights. Їх cannot be connected sequentially. Another line should be added to the output to the control unit, or you may have your own adapter. To connect another RGB line, use a special plug. To a new one, they add a line to a friend and zastosovat either okremium, or the main block of life (albeit more tightness). Pidsilyuvach synchronizes the brightness and the sound of both lines.

Having looked at the technology of connecting a light line up to 220V, you can independently switch to the robot. With the help of recommendations fahivtsiv, you can create a superb and safe lighting fixture.