Why does a light lamp shine when the light is turned on, and how to fix problems

⁰

Merekhtinnya svitlodiodіv in the process of their functioning may be viklikana dekіlkom reasons.

In order to correctly independently determine why the light lamp flares when the light is turned on, it is necessary to be aware of the design features of such a lighting fixture.

The key components of any standard lighting fixtures include:

flask-diffuser, which vikonuє mechanical zahist svіtlodіodіv і vіvnomіrno rozpodіlyaє svіtlovy potіk;
light-emitting diodes or nap_vprovidnikovy, light-generating elements;
a different electrical circuit board for connecting diodes;
radiator housing, which ensures sufficient heat input for the process of lamp operation;
a driver electronic unit, which forms a voltage for the life of light, we put it in the back of the case;
plinth part.

Whether it’s a variant of a light lamp and a small amount of light and a lack of it, or such a model, at the thought of fakhivtsiv, significantly shorter, lower main threads, tungsten lamps from the point of view of showing energy and the intensity of possessed lighting.

Causes of the flickering of light bulbs

Why do the light bulbs blink when the lamp is switched off?

It is typical for a bright light to shine in a vicious camp, it is necessary to remember the negative consequences of such a merekhtinnya, which is guarded by a protracted hour.

And to herself:

pogirshuєtsya zagalne samoochuttya people;
the phases of night sleep become confused;
reduced practice;
watch out for the eyes and the headaches.

Okrіm іnshоgo dnizhuєtsіy ekspluatаtsіy termіn dzherel svіtlennya that komplektuchihnyh details, yaky, as a rule, do not pіdlyagayut zamenі. Merekhtinnya may be provoked by such situations:

the low brightness of the lighting fixtures and the inconsistency of the intensity of the light lamp;
damage to the laying of electrical communications, including incorrectly installed vimikacha;
presence in the lighting system of light-emitting diodes and vimics with neon or light-emitting diodes;
close roztashuvannyam svіtlodiodnogo osvіlennya to pristroїv and priladіv, zdatnyh generate large electromagnetic fields;
trivial term of exploitation and severe reduction in brightness of lighting.

In the minds of a bright light, an energy-saving dzherel of lighting of a light-type type is most likely to freeze for the filthy quality of life, or significant drops in voltage.

Troubleshooting Methods

Before the most wide-ranging reasons, there is a moment of forgiveness when installing vimikach and setting it to zero, which is absolutely unacceptable with such a system of lighting.

The process of switching off at times does not stop the functioning of the light-emitting lamp, but the blinking is characteristic of blinking.

The problem of vimikach substitution

The most widespread cause of blinking when the position is turned off is the problem of vimikach with the appearance of a small light, which is sleeping when the keys are placed at the switched position. Resurrection of the lansyug called out the supply of electricity to the light.

Standard ways of solving the problem, as if a light lamp is blinking, є:

view of light darts from the main electric lance;
the removal of a light indicator and the installation of a simple vimikacha;
connecting a splendid lighting lamp to an electric lantern, which allows you to reduce the voltage, which charges the capacitor;
connection of a resistor with a voltage of 2W and a support of 50 kOhm at a separate box or with a cartridge, when the wire is connected, a terminal block is connected, and the insulation of the resistor is connected behind an auxiliary tube of a thermosetting type.

The most popular option is to connect a connection for an additional okrema drota. A shortcoming of such a method is the presence of an additional charge of darts.

Resistor installation

Usunennya migotinnya svіtlodiodіv often zdіysnyuєtsya for additional installation in elektrolantsyug shuntuyuchigo support near the resistor. Such a method helps to turn on the switching on, or change the fittings that are switched.

A resistor is installed at the expansion point of life, and in order to prevent overheating and a distant fire, it is insulated with a special thermal tube. The optimal option is a parallel connection of a soldering resistor. At the final stage, soldering is removed and placed at a special box.

Electrical wiring

Damage, admitted in the course of electrical installation, often happens due to the light connection of the zero wire, which means that the phase should be illuminated after the failure.

Mounting the capacitor is charged in this way practically constantly, and correctly correcting such a pardon is possible only by reconnecting the phase.

Correctly select the phase wire for the help of the tester or a special probe. Also, you may need to install a taxable possession at the ELV.

For the help of a searchlight, you can create miraculous street lighting. up to the border independently and what is needed for whom? Read respectfully.

You will know everything about the specifics of the reading of the indications of the licensees in the electric power industry.

How to seal the electric power lichik and who can do it? Vіdpovіdі on qі supply you know.

Other factors that call merehtinnya

Dosit often vlasnik svіtlodiodnogo svіtlennja sticks with situations, behind such outbuildings short-hour sleeps are expected to wind up at the same position.

A similar phenomenon can be blamed for a near-close roztashuvannya dzherela illuminating with electrical wiring, which vibrates a stronger and more stable electric field, which progressively increases the amount of energy in the middle of the driver capacitor. When the maximum value of the voltage is reached, the light falls off.

The measure of a standard light-emitting lamp can also be vindicated, as the installation of a lighting fixture is not assigned to specific settings of the light regulator and with the absolute insanity of the driver of the circuit that is victorious. In this case, it is necessary to replace the driver or the most illuminating accessory for obtaining the optimal voltage values.

Installing a shunt resistor directly into the cartridge

The crime of improper connection or installation, the reason for the blink of an eye, can be at the hands of virobs, so fakhivtsy recommend buying only the most certified outbuildings, which are produced by superior and already distorted, well-known firms and virobniks.

If necessary, it is allowed to install a transformer, building a building, and to ensure the necessary parameters of the light source.

Merekhtinnya svitlodiodіv pіd hour of work

Light building measures in the process of work, and such a problem, as a rule, is not perceived visually. As soon as the light is turned off, and after a few seconds it goes out, then as the main reason you can see the failure of the trigger mechanism, which does not cope with the functions of the transformation or the supply of an electric jet. At this time, it is recommended to replace the starter again.

The causes of periodic blinking of light bulbs can be:

over a low level of voltage at the input electric power supply;
system failure to start;
over-the-world drops and sharp haircuts.

Yearly, energy-saving light bulbs can cause malfunctions in microcircuits, which also indicates incorrect operation of lighting fixtures.

Depending on the optimal minds of exploitation, the term of the service of light and the same characteristics of lighting are significantly reduced.

In this way, it is possible to overcome the shkidlivy merekhtinnya of light diodes, as well as vikoristovuvaty akіsnі and povnistyu svіtlyuvalnі prilad, as well as to trim all the rules when connected to the measure of a constant electric jet.