Can you change the wiring in parts and how do you do it right?

Don't worry about being able to do it again. Tse s material feasibility, and navіt specifics of the repair. Let's say, as the head of the apartment, having done the repair only at the bathrooms and in the kitchen, do not change all the wiring in the rooms. However, deprive the old electrical wiring in the rooms, de bude repairs, not the right decisions. It’s better to pay a little more and replace the cable, as well as electrical fittings for a new one, more safe and clean. At this moment, a private replacement of wiring in an apartment or a private booth is blocked. The peculiarities of the study are working, as well as the advantages and disadvantages of this method will be shown below.

Chi varto minyat electrical wiring parts?

In order to understand, rationally change the electrics in parts and you can work in such a way, for the cob it is possible to overcome this type of electrical installation:

1. Hire stained glass.
2. Width for electrical installation of a large room (or okremikh lines) is done, lower wiring replacement.
3. There is no need to carry out repairs at all rooms.

For what reason, private replacements of electrical wiring will end. How to talk about shortfalls, there are more of them:

1. it is possible by far not in all ways, and in any case, it will be unsafe. As far as we know, earlier all wiring was carried out with an aluminum cable, it is necessary to twist the copper cable at a time. Therefore, it is impossible to get rid of aluminum and midi with a frequent replacement of electricity.
2. Folding of new lines in old boxes. First of all, the old rozpodіlnyh boxes have little space for commutation alive. In another way, aluminum darts tend to be damaged and can be damaged when laying a new line.
3. Advancement of the venture on the old run. If you just forget to often remember the electrical wiring in the apartment or the house, moreover, by connecting a new cable to the old one in the distribution box, you can blame the vanity. It is tied out of it, so that before the box, from the shield, we take the old aluminum wire of a small cut, which, better for everything, does not show the new vanity. As a result, a new cable will be pulled through the shield without the middle, bypassing the distribution box. But it’s not more problematic, but it also complicates the wiring diagram.
4. Larger display of materials. At zv'yazku іz zastosuvannyam "obhіdnih schemes" pіde more cable for electrical wiring zagal. That and the robots themselves will be foldable and dear (as if they were the servants of fahivtsiv).

As you can see, a partial replacement of electrical wiring in an apartment and a booth is possible, but protection is more problematic and unsafe. Low nadіynіst z'єdnan, and also high ymovіrnіst vyniknennya є dosit vagomi vadas.

Nuances of private wiring replacement

In some cases, it is not necessary to obov'yazkovo change all the wiring to a new one, wind it up before a major overhaul. In order to save on the replacement of wiring, you can cover the aluminum drіt for lighting, and lay copper on the sockets. Like an old aluminum wire in a good camp, a group of lamps is guilty of vitrimati. The exhaustion is not particularly great, so new light bulbs and energy-saving lamps use less electricity, lower old light bulbs are heated. Also, the replacement of only a power line can also be carried out by a partial replacement of electrical wiring for mid.

With sockets and iron lines on the exhaust of electrical appliances, such a trick will not work. Why is it tied to this, that the power line of the obov'yazkovo is to blame for the mother of the earth, and for which a three-core wire is laid for the replacement of the two-core. To that, you have been wrong, that by analogy with lighting, you can often remember the wiring for connecting sockets, you know - this option is unacceptable.

Vikonanny robit rules

In order not to repeat and not describe the process of replacing the wiring for a few times, in these articles we have more than key moments, for which it is necessary to pay respect. Also, if you want to change the electrical wiring in parts in a private or panel booth, insure the following recommendations:

1. The cable needs to be twisted three-wire, copper, with underwire insulation. It is recommended to run a cable near the apartment and the booth. For sockets, choose a 3 * 2.5 mm. On the electric stove it is possible to lead the cable with a 4 mm tie. It’s necessary for any kind of person and on the basis of ready-made values ​​to choose the appropriate rozmir.
2. Sockets and vimikachi replace them with new ones, be it a fluke. Sockets can be re-insured for 16A. At the bathrooms and in the kitchen (in order with a miykoy), put sockets with caps to protect contacts from getting into the water.
3. It is necessary to use special terminals to cut the darts of different metal, or pressurized with solid sleeves. Zvichaynі іzolovanі twisting robit in any time is not possible.
4. It is necessary to protect the line from the switchover and the short hum with an automatic switch. Vіd vіtokіv struma defend the ELV. About those, we rose in the okremіy statti, so it was said. You can also protect and vіd revantazhen, і vіd short circuit, і vіd vіtokіv struma.
5. A private booth needs clothes. At the apartment, it is not necessary to organize a circuit that is grounded. In which case, the installation of the ELV is inverted by that organization.
6. Obov'yazkovo is necessary, as well as an old induction lichnik, which is of class 2.5.
7. All work performed due to the inclusion of voltage. If you need a socket for connecting an electric tool, you can power it directly from the shield, by switching on all other lines.
8. Before tim, how to proceed to electrical installation, obov'yazkovo vyvchit described by us that. Іnformatsija dosit korisna and allow the most popular pardons to be deleted, which are allowed by home masters and self-taught electricians.
9. Sob not to overpay and not to change the automatics of the main power lines, it is recommended to start before them, as a way to fix the partial replacement of wiring, obov'yazkovo, moreover, not the singing of the stone, but the outside.
10. Before carrying out the work, prepare all the necessary tools, as well as store the clothes on the electrical installation work. The more timely the preparation will be, the sooner the main process will be carried out. All necessary tool images in the photo:

Vrakhovuchi all nadani vishche for the sake of it, you can go safely and correctly replace the electrical wiring. All the same, after vikonannya works, before the walls are finished, it is recommended to ask an electrician, so that he will check everything again and ring the lansyug.