Installation of electrical heat pipes: do-it-yourself laying technology

Electric supply - it’s safe and easy!

The population is actively mastering different ways to heat the life, and it will install it independently. A home master for creating a comfortable atmosphere at home can independently install an electric heating system. Tsey zahіd zabezpechuє alternative pіdhіd to scorch and save family finances.

Electricity supplies can be installed at the castle houses, luxury apartments and apartments with an individual scorching system. Їх vlastovuyut in okremih kіmnatah to choose vlasnik. The process of creating sublogs is based on the choice of the main heating element, which forms the basis of the design.

Choose the warmth of the log

There are two types of heating elements that determine the type of electrical wiring. After the designated sign, the sublogs are subdivided into:

• Cable underlays, if heating is safe heating cable, laying okremo or thermomat;
• Plіvkova pіdloga, if heating is safe, especially pіvka.

The selection criteria for us are:

1. Chi is planned to win the sub-log, as the main thing was to burn it, or the supplementary one;
2. Yake underlayment is planned to be on top of the heating elements;
3. Stan perekrittіv that zagalna visota prismіschennya.

Choice of electrical heating underlays to be carried out under the same type of covering.

Under a wooden lining, carpet, parquet and laminate flooring, it is recommended to install a lining on the basis of a slab. Іnfrachervoni promenі effectively penetrate krіz tі materials and easily warm up the space of the logs.

Pіd keramogranіt, as well as ceramic tile vlashtovat under a heating cable or heating mats.

The choice of the cable of the thermomat is determined by the fact that the altitude can be increased. Naytovsha heat supply - cable. That is why on the tops, starting from another one, the next assessment was to cross the height of the stele. The cable is laid down for the best indications. At reshti vipadkіv vikoristovuєmo thermomati.

Rozrahunok

An important indicator that characterizes the electrical heat of the environment is tension. If the choice of the main material is crushed, an examination of tension is carried out. For this purpose, there is a showcase for the king's square, which is warmed up. As a sub-log, it is planned to under the main heating system, the indicator of the core area will become 70-80% of the total area. As a supplementary heating system, core area - 50 - 65%.

An average indicator of the tightness of the logs, which warms up the acceptances:

• Additional variant of scorching - 140 W per square meter;
• For the main option of burning - 180 W per square meter.

Multiplying the value of the indicator of the core area of ​​a particular application, and sim viroblyaemo razrahunok electrical heat inputs.

For more accurate estimates, you can use a special calculator on thematic daily web pages. There you enter personal indications, and the program will automatically install a prank.

Installation preparation

The preparation procedure starts from the complex work from the foundation. There is a lot of statuary covered, a repetitive cleaning of the surface is carried out for the help of a promyslovy sawmill. Defects are laid by the cause of self-development sumish.

Electricity is laid on a heat-insulating material. The material of the selected backs, not less than 3 mm thick, on a metal base. Smugi insulation is placed with the foil side down on fragments of double-sided tape. Shmatki heat-insulation with special adhesive tape.

It is possible to install a thermostat at a special type of bathroom installation box. A grounded power cable is connected to it. Down the wall from the box, we prepare a groove for the heating cable.

When lapping under the cable, the surface of the thermal insulation is covered with an armored mesh. For laying heating mats, the grid is not needed.

Laying the heating element on the back is marked on the scheme. There is space on the archway, where it is planned to lay the cable for the mother. Three schemes include space, where there are important pieces of furniture.

The scheme is repeated already on the surface of the logs. Razmіtka robimo smoogs of scotch tape. On this basis, an electric circuit of a warm state is created. When it becomes difficult to create a layout plan, it is recommended to look at the butts of similar robots on the Internet.

Mounting

The technology of laying electrical heat and the logs requires precise completion of the instructions.

The cable is laid neatly with the lines of the socket. It is not allowed to bend the cable. The cable is fastened to the armored mesh with a special line or clips. Laying is carried out behind the rozmіchenimi lines. At the process of laying the mothers are laid in such a way that the foundation is cremated, and the cable is completely covered. Mothers are fastened on a thermal insulation basis for an additional special stitch.

The installation of a heating cable with a power cable and a temperature sensor is viroblyayemo on a flat area. The place is closed with a corrugated pipe and laid between the rows of cable. We recheck the cable. The power cable is attached to the thermostat. The connection of a warm electric power supply must be carried out when the electricity is turned on at the apartment. Before further visits, a test turn-on of the heating system and a re-verification in certain temperature conditions are carried out.

Screed

Electric heating elements are covered with a screed ball. To carry out the work, you can make your own sumish on the basis of concrete. And better yet, come with a special sum, on the packaging of which there is an indication of the stagnation in such robots. Dry sumish should be bred according to the instructions. The thickness of the screed for heat pads is 4-5 centimeters.

The mass is spread over the heating elements with a spatula. It is important to control, so that the warehouse is stacked without damage to the guts under the body of the cable. Povіtryanі utvorennya zavazhivat yakіsnom nagіvannyu. Ready screed for warm weather is left until it hangs completely.

Plivkov pidloga

To lay down a plaid pidlog, not obov'yazkovo to see the cover. Suffice it to clean thoroughly. The main stages of the installation of a plivkovy podlog are followed by the stages of work for the installation of a cable podlog.

We place a heat-insulating ball. We make a scheme for laying out the fragments of the smelting. Razmіchaєmo on the surface of the pіdlogs of the place of the layout. It is possible to cut the line on the line according to the cut. As a space of roses, there is a space between the segments, the edge must be insulated.

Smugi plіvka is laid out according to the lines of marking. It is not allowed to impose the edge of swarms one on one. Smugi is fixed on a thermal insulation base with squares of double-sided tape.

We connect electric heating for heating. See you before swimming for help for additional zatiskachiv and isolate the day. Mustaches of darts are carefully guided to the wall and stretched under the plinth. Pіd'єdnannya kozhnoї zі smuzh plіvki to the thermostat to be carried out in parallel. After the connection of the entire set of wires to the thermostat, it is connected to the wire. We are conducting a test launch of the heating system.

Plivkova pіdloga screed does not close.

Final ball

Upon completion of the entire complex, the installation of a residual decorative coating will be carried out. Yogo viroblyayut according to the rules adopted for the selected material.

The power supply from the heating cable or the heating cable may vary from hour to hour. From the very beginning of the installation procedure until the moment of commissioning, the cables on the basis of the cable can take three days up to a month. It takes two or three days to install the logs.