Do-it-yourself installation of electrical heating equipment from photo and video

⁰

At this hour, for the power supply of heat, the supply chains more and more often began to shut down the electrics. At this point, you need to know the need for a special electric cable, for the help of which you need to heat up the logs. The site, having prepared a good instruction with the help of the author, chose that installation, added the logs with his own hands with photo materials. Otzhe, let's do it.

Option of heat supply, in which the electric cable is installed, on the water heating system, it is accessible both to the owners of private booths, and to the baggies of the city's bagatoverhives. With the power of the electric supply, the connections do not require any installation of pipes and connections to the heat supply system, the whole work is carried out at the laying of a thin electric cable and connected to the electric line.

With a system like this, it’s easier to pick up, shards to get a lot of different electronic devices, like to tell about those that the temperature was at a given level for the whole hour. Such warm podlogs can be victorious in various places of residence, including zamіskі budinki, dachas. For example, vikoristovuyuchi such a system, you can adjust the required temperature in a small zamіskom booth or adjust the timer so that until the moment you get out of the garage, the place will be warmed up, for the start of the engine.

Behind its own building, the electric power is rich, in some ways similar to the system, water serves as a heat carrier. Ways of laying are also practically not affected by the installation of heat pipes, the whole difference is more than that, in which case the heating element is a cable.

According to the principle of operation, heating cables are divided into two types:

Self-regulating.
resistive.

The whole system of electrical heat pipes is made up of power darts, which are laid for the connection of the system (mostly stinks are laid in the walls), and that the cables are heated, for the help of which the heating of the pipes is carried out. To change the operation of the connection of power and heating cables, it is carried out with the help of special couplings, as shown in the photo below.

resistive cable

The main heating element of a resistive cable is a core, which can move the opir, passing through such an electric stream, is converted into thermal energy. In order to hide people's wounds with an electric strum, the heating core is covered with a ball of insulation, which is superimposed on the beast by a braid of metal. Tse braiding to serve as grounding and screen shielding in the form of electromagnetic fields, which is to blame for the results of the work. The mustache of the balls is covered with an oval insulation. resistive cables can mother like one, so they lived.

Single core cable

A system that can have a single-core cable is the simplest option for electrical heat supply. Її installation is laid in the cable laid behind the sub-logs, for which it is necessary to connect both ends of the cable to the energy supply system, so that the cable is laid out on the underside of the visible loop. Such a system, due to its simplicity, has one single minus, after the passage of an electric jet through a core cable, an electromagnetic field is established. The braiding smooths out the physical appearance, but the result is not always satisfactory.

Driver cable

The double-wire cable has another streak-conducting core, which is roztashovuetsya between two heating wires. Vrahovyuchi those that electric strum pass at different direct lines, electromagnetic fields, which are blamed on different droths, compensate one for one. When installing resistive cables, it is necessary to carefully lay them at the screed, so that there is no overheating, and the cable is not in harmony.

Self-regulating cables

Such cables are spared short, like in resistive cables, because here the heating element is a polymer matrix. In times of overheating of one house, in others, a decrease in the strength of the struma is observed, which infuses a vision of heat. At this station, a decrease in temperature is observed, just as the system is working in the normal mode. Cables, which are self-regulating, may be more versatile than the best heating cables, but they also guarantee trivalium.

Plіvkova infrachervona heat pіdloga tse vіdminny variant if there is no possibility to build a screed, you can lay it under or carpet. The advantages are obvious, it is reported to know about.

Rules for the distribution of heat and electricity

When buying a cable, it is necessary to indicate the intensity of the heating system, for 1m 2. Fahіvtsі rady dorimuvatisya advancing parametіv choice:

bedroom room - 100-150 W/m2;
front door, corridor, kitchen - 150 W/m2;
toilet, bath - 180 W / m2;
balcony, loggia - 200W/m2.

Koristuyuchis tsimi danimi, you can easily tell your pet the tightness of the system to support the logs. When rozrahunka turn off the area, as it is occupied with objects that can stand (shafi, sofas, bath, refrigerator, etc.). All these objects are important for the normal circulation of the air, and it is necessary to cause a loss of electricity, as well as in these places it is possible to overheat the cables and break them out of harmony.

It should also be noted that the electrical wiring in the living quarters is insured for a maximum of 2 - 4 kW, so it is necessary to insure this moment. Yak variant vivodi okremo.

Rozrahunok tightness cable razrakhovuєtsya for such a scheme. For example, take the butt of a sleeping area of 5 m 2, with which the tension can be 100 W / m 2. We take 100x5 = 500 watts. At the store, it is necessary to pick up a cable, which may cause tightness. More likely, it is acceptable to see a cable with a length of 24 m, which can have an intensity of 550W. Now you need to calculate the laying of the cable - 5x100 / 24 = 21 cm (S heating x100 / double cable)

Technology of installation

Before that, how to install an electric heat under the log, it is necessary to designate a place, it is necessary to install a thermostat. For which in the wall it is necessary to open the door, in which the mounting box will be installed. Start sounding at a height of 50 - 100 cm. In the month of installation, a groove is robbed in the wall, which will be the power rods until the month of installation with a heating cable.

One of the technology options installed in a room, in this case a bathroom

After all these steps, proceed to laying the cable, having rolled the ball of heat insulation about 2 cm in front. The cable is laid on the surface of the surface. When installing the cable, make sure that the rows of the cable do not stick together. The cable is laid according to the scheme, otrimanoї pіd hour razrahunka. You can work as parallel lines, and in spirals, because there is no great difference among them. Laying is carried out on the mounting line, as it fits close to 50 cm from the croc. After laying the heating cable, a temperature sensor is installed, the fault is to be installed at the plastic pipe. Before the residual filling, the cables should be checked with a tester for the quality of the cable, in order to avoid re-assembly of the screed at the factory cable cable.

To control the temperature, the next step is to program the thermostats to allow the vicoristation to rise at that hour, if the Lord is present at the occupant.

Now, if everything is installed in its place, you can start flooding. If the surface of the underlay is solid, it can be more than 3 cm, and if you lay a heat-insulating ball, then you need more than 5 cm.

Before connecting the heating cable, you can proceed, if the screed is hardened. Screws are fastened on the left side of the thermostat, it is necessary to attach sensors to them, to determine the temperature of the logs, as well as to feed the heating cable and electrical wiring, so as to live the entire system. Importantly correct. If you are not convinced that you can correctly get the warmth of the podlog, then we are glad to marvel at the video for the sake of the fahivtsiv.