How to build electric heat for the supply with your own hands - installation technology for preparing the base before connecting the system

Insulation of the living quarters is taken care of by a smart skinned person. This is dictated by the townsfolk to change their service to communal services. Even more popular at the same time is the electric heat of the log, it’s not so easy to assemble a yak with your own hands. However, you will need some new skills in a connected system. Incorrect connections can lead to inefficient robotic design, or a malfunction, a building problem.

The electric heating cable or the sounding mat is placed near the bathroom, children's room, in the kitchen, balcony. This system can be vicoristan as a basic or additional scorch.

You can name a few types of electrical sublogs. To heat up victorious:

• heating mat,

See the electrical heating sub-logs, ways of installation and recommendations for the type of coating

Skin construction may have its own. However, at the submission of statistics, we can see how to generate electrical heat from the heating cable.

Before him, how to restore the warmth of the pіdlog, it is necessary to її resolutely open up, and also choose the place, where mothers will be. First of all, choose the localization of the system. If so, don’t forget that it’s better not to put them in quiet parts of the room, where there are important furniture to avoid overheating. Now, check the roof area for laying and multiply її by the tightness of the system. With this, one should not forget about the type of application, and the possibility of heat losses.

The butt of the rozrahunka of the electric heat pads, which is built up as an additional scorch to the main radiator

Foundation preparation

It is not so important to install the electric heat supply with your own hands. It takes literally one day to install heating mats, with a cable option, the installation time will be increased. Carry out all the following operations with the utmost respect. For the cob, prepare the base before installation:

1. Look carefully at the black pidlog. As if there were serious drops, you should put them on the shoes. For whom oblashtovuєtsya abo. All cracks and crevices in the foundation need to be laid in order to change the heat loss and sub-logs.
2. Take away all the smіttya she drank. Naykrasche for tsyogo zastosovuvati pilosos. Vіn can be done with an effort, to that, it is possible, the next victorious pronunciation is an option.
3. Installation of heat-insulating material, which allows the most efficient heating of the heating system. Vіn directly warm uphill.
4. Acceptance mark. It is best to precisely work out all the vimir and to determine on the basis of those areas, where the construction will fit. Tse help you not to get lost and speed up the robots.
5. Priming the surface of black underlays. In this way, you can paint the bond between the cement screed and the base.

On a vir_vnyanu, znespilen basis (without major defects), the installation of the cable is carried out zgіdno zі laying scheme

Installing a thermostat

Do-it-yourself installation of electrical heating with your own hands should be carried out only after the destination has been designated. Vin is guilty of roztashovuvatsya at an easily accessible place. In this case, the thermostat cannot be bent, covered with furniture, otherwise it is incorrectly practicable.

Vіdstan vіd pіdlogi to the regulator is guilty of becoming less than 30 div.

If you want to install a heating cable near the bathroom or sauna, it is best to install a thermostat outside the room. For yoga fixation, it is necessary to open an opening for an additional drill with a special nozzle. And you also have to do some work over the wall chasing for laying the wiring from the temperature sensor. The rest is guilty of staying at the corrugated tube. Tse dopomozhe protect yoga from the influx of negative external factors.

Technology for installation

Pirіg electric heat supplies. Zastosovuchi cable screed obov'yazkova, zastosovuchi heating mat installation is carried out in a ball of tile adhesive

After the preparation of the installation is completed, you can proceed to the installation of the cable. Robot technology transfers the following manipulations:

• Laying waterproofing. For which you can use a special polyethylene liner or a special membrane.
• Laying a damper line on the perimeter of the underlay. Vaughn will give the opportunity to trim the technological gap between the walls and the screed. If this material is wide enough, it can be mounted to fix thermal insulation.
• Installation of a temperature sensor and a regulator.
• Cable laying. Here it is necessary to check that the heating elements are to be found on the remote wall - 20 cm. If you have brought electric mothers, then between them you can become 5-10 cm.
• Installation. Throw, її vysota can re-visit 3 divs above the surface of matіv. Whether it’s a vapadka, it’s an hour to flood the next step after the equal of the future foundation. Heating mats optimally lay tiles not in a screed, but in a ball of tile adhesive.

After the victory of all the workers, the next date is to let the litter dry. For whom you may need a whole month. At this hour, it’s better not to check the application, so that the stretch is not worsened by the quality of the screed. In addition, it is not possible to turn on the heat of the log until the opening is completely caught. Therefore, it is better to carry out the first re-verification of the system's practicality before pouring.

Features of the connection

Qia part of the installation of an electric cable Here you need to get everything right. The work with the connected system consists of the following activities:

1. Rechecking the cable and wires for additional special accessories: a multimeter (to identify the operation of the system), a megaohmmeter (to identify the operation of the insulation mat).
2. Connecting a temperature sensor, a thermostat and a life cable. Follow the instructions for the instructions, as it is in the kit with the attached system. At different virobniks, they can get drunk. To pay respect, that the hour of the connection of the heat and the logs is necessary to turn off the electricity.
3. It is necessary to fix the cable of the mat and the cord of life behind the auxiliary clamp, in order to secure additional grounding.

Installing the cable independently is not easy, but it is possible as much as possible, it is necessary to comply with the following rules:

• Under the hour of laying the next to finish the scheme.
• Try not to twist the cable or twist yoga.
• Since the cable is two-wire, yoga cannot be cut.
• Do not blunt on the heating mats before pouring. Otherwise, you can mess up.

Dotrimannya іnstruktsії will give you the opportunity to do all the work independently, without the fahivtsіv being caught. And tse, with your blackness, to spare your bones. If you want to connect the system, it is important that in the event that it does not come into contact with the skin. Yakshcho є sumnіvi, better give the robot to fahіvtsy. Leave a comment to the article or share your opinion about the installation of heating systems.