How to connect a chandelier with 3 lamps

Chandeliers with a different number of lamps are not only an embellishment for the interior. For the help of these luminaries, we can create the creation of different minds of illumination. The presence of first-hand knowledge and beginners in electrical engineering, the development of elementary installation rules makes it possible to connect a chandelier with three lamps through different vimikachi independently to wind the electrician-pochatkіvtsu.

How to connect a chandelier with 3 lamps to vimicach with 1 key

The connection of this lighting fixture to a single-key vimikach is completed by a few steps. It is necessary for us to pick up the wires at the chandelier itself. Here, a leather cartridge is connected to two darts - phase and zero, the insulation of which is barred in different colors. Most often, the black conductor is valued by zero, other colors mean the phase. According to the rules, the phase connects with the central contact of the cartridge, and zero - with the rear.

The fastening of the rіzhkіv chandeliers is built up to the body, where all the rods are united. Їх rozpodіl for single-key vimikach is counted as follows: phase darts are united in one group, and zero darts - in another group. A trace of memory, that zero is given to the chandelier without a middle, passing by the vimikach. Nadal vuzli wires of the zero phase, which come out of the chandelier, are connected with the main conductors of the electric line.

Also, two darts -. There is no way to supply a two-wire cable to a chandelier and an okremo to vimikach. A phase and a zero are supplied to the luminaire, and only a phase to both contacts is supplied to the vimikach. The flickering and opening of contacts allows the flickering and flickering of the light bulbs.

How to connect a chandelier with 3 lamps to vimicach with 2 keys

Before the beginning of the installation, it is necessary to make sure that the lamps are turned on with a skin button. This guy has few options. As a rule, one key turns on one light bulb, and another - two times. You can also change the functions of the keys among themselves for the sake of clarity.

Sound through the overlapping plate to enter 3 conductors or a three-core cable. At the modern booths, 4 wires are added to them for grounding the yellow color from the green smoky. Others when the position of vimicach is on. Provid, in which case the voltage will be zero, prote іnshі - phase.

At the chandelier itself, phases can be combined by groups. Three three bulbs two are connected one by one for one-hour inclusion. Whatever is not crushed, it is necessary to split the darts independently. Dali, zero darts of the chandelier and the merezhi are twining among themselves. Let's wake up the phases of the luster and vimikacha. After whom the re-verification of practice is to be done.

At different times, you need to change the functions of the keys, it is enough to remember the darts with your hands. As soon as the offensive keys are turned on at once, all the bulbs will light up at the same time. All z'ednannya are consigned to the fortified zakhisny outhouse.

How to connect a chandelier with 3 lamps to vimicach with 3 keys

Tsya scheme is an additional variant of the front connection, the main ones are filled with too much. Chotiri darts enter into this chandelier, and three and more in the chandelier. Quarters of darts of yellow-green color can be seen to the ground, and they are designated as RЄ. It's necessary to just eat among yourself. As in the chandelier, there is a ground wire, but the same wire on the stele needs to be trimmed and resolutely insulated. Other explorers are stumped for that scheme, more has been said about the yak.

In some cases, the quarters, which are going to stand, may play the role of one more phase. The most variant is most suitable for vikoristan triclavish vimikacha. Vin gives the ability to turn all the bulbs that are in the chandelier. Triklavishny vimikach gives the possibility of vmikat and vimikati skin independent group of lamps. For whom one needs another veil in a stelovoy dart, it was already guessed about the yak. All dії will be the same, like for a two-key design. Before the input contact of the vimikacha, the phase of the home measure is connected, and at the output, the phase goes to the skin group of lamps.

When installing vimikacha, it is necessary to comply with the rules of electrical safety, so that the strum is protected from damage. Therefore, in front of the vicons of the electrical installation work, it is necessary to carry out the entire electrical network. You can change the appearance of the electrician for an additional indicator twist.

In this order, connect a chandelier with three lamps without any special folding. Naygolovnіshe - relatively vichchit the scheme and, according to the possibility, to install only a large number of cables, with a minimum number of extensions and twists. As a result, the operation of the chandelier will be long and safe.