Do-it-yourself electric heat supply: installation
Installed in the apartment or a private house of heat, an electric one allows you to feel comfortable, whether it is necessary for the time being, in addition, to install the main scorch for heating the room.
You can lay the cable on your own without a call to the services of specialists, which will reduce the financial investment. The great relevance of this option of another row heating is gained during the processing of a bathroom, a verandah or a loggia.
It is necessary to cover at least 70% of the area of the apartment
Installation of electrical heating sub-logs may be more difficult in case of additional advancing factors.
Under what circumstances, the appearance of a reversed dzherel does not play a role.
Tse mozhe buti yak cable, so і matte or infrachervona elektrichna heat pіdloga.
- The layout of the stacking can be folded out behind the back, and it can be stored up with the refurbishment of the bulky furniture and the large butt equipment. Bazhano do not install it on the heating elements, so that the possible harmless dart can escape.
- In order for the robot to work with the heat supply to be effective, it is necessary to cover at least 70% of the required area of application.
- Vikonati razrahunok admissible navantazhennya on wiring vіd work and heat elektrichnі podlogi i vyaviti chi won її vitrimaє. You can do more with additional tables.
| Category of accommodation | Average power consumption of electric heat inputs, W/m2 | Maximum power consumption of electrical heat supply, W/m2 | Intensity per unit length of the heating cable, W/m |
|---|---|---|---|
| Sanvuzol (bath, toilet, shower) | 120 - 150 | 200 | 10 - 18 |
| Kitchen | 100 - 150 | 170 | 10 - 18 |
| Razmіschennya roztashovanі on 1 version of the bagatopovіvlі budіvlі or above the arches | 130 - 180 | 200 | 10 - 18 |
| Heated wooden pidlogs on logs, overcuts | 60 - 40 | 80 | 8-10 |
| Tonka pіdloga іz zastosuvannyam іnfrachervonoї plіvkovoї podloga | 100 - 120 | 150 | 8-10 |
| Balconies and loggias | 130 - 180 | 200 | 10-18 |
| Mainly scorched from the pouring of the concrete screed | 150 - 200 | 200 | 18 - 20 |
Ready to lay out easier, lower cable After all, think about it, you can proceed to laying the electric warm pads with your own hands, or you may need to sign up for it, which looks optimal for your accommodation.
Okremo next to say that the installation of a cable warm sub-log is the most foldable, but also saves electricity.
The simplest thing from the point of view of an independent vikonannya is the laying out of ready-made mats, but the staining of electricians stinks the most. The installation of the possession of ІЧ sublogs is considered to be average for folding, the situation is similar to the situation with the reduction of electricity.
Folding scheme
At the next stage, it is necessary to competently fold the scheme for laying the material. When it is necessary to protect yourself, what should not be laid under the electric heating under the furniture. Krim tsyogo, vіdstan vіd stіn maє buti less than 5 cm.
Let's widen the most and use the simple method of laying out the cable with a warm cable and a snake. Vіn polagaє in rotashuvannya drota on all dozhinі primіshchennya, but not reaching 5 - 10 cm to the protilazhnі stіn, razvlekaetsya that ide at the zvorotny bik.
Vіdstan mіzh wires can be not less than 8 cm So the whole area is curled up, prepared for laying. Krim tsgogo, vіdstan mіzh parallel rows of cable is not guilty but less than 8 cm.
Do not trace the heat of the electric supply with your own hands near the pipes of the centralized scorching. This is due to the fact that the system heats up evenly, and due to the presence of cold water for the exit of heat energy, the cable can overheat and get out of tune through the overhead heating.
Otriman's scheme machi the shape of an irregular geometric figure. With help, it will be possible to visconate independent rozrahunok material and lay the heat underlay.
Independent rozrahunok
Zrazkov scheme for laying the electric cable
Having chosen from looking at the optimal technology and having put together the laying scheme, it is necessary to unpack the quantity of the necessary material. Often finish the harvester and bring in until the set of possessions is ready for the table, for the help of which you can easily collect independent roses without problems.
If there is a situation, it is necessary to lay down the electrical heat under the heating or infra-red line, it is necessary to calculate the area of the premises. In case of need, do not miss the fact that there will be a need for an additional cable, for the help of which all possessions can be connected to each other.
Surface preparation
Before laying the contour, it is necessary to apply waterproofing The laying of electrical heating pads is laid on the prepared surface. If so, depending on the situation, the base can be cleared from the old screed and zabrudnen. It is recommended to install waterproofing over the entire surface, it is recommended to bury the wall by 5-10 cm.
In order to compensate for the thermal expansion during the heating hour, a damper line is fixed on the wall.
The excesses that protrude above the surface can be seen after the installation of the heating pad is completed.
It is possible to hide the heating of the sus_da from the bottom, so that the heat-insulation pads are correctly installed.
In the fallow type of installation and type of surface, the following materials can be used:
- The spinning of polyethylene with foil-coated vibrating with vikoristannі elektropidlogi as the main scorched.
- Pіnopolіstyrol or mineral wool zavtovshki no less than 5 cm vikoristovuєtsya with insulated loggia or veranda.
Before that, how to install the heat under the log, on the insulators there is an armored mesh. Deyak fakhіvtsі vikoristovuyut zamіst neї mikrofіbra, zmіshanu іz plasticizer.
The effect, omitting such an analogy, does not change.
Mounting
Do-it-yourself electric heating installation starts with the installation of a thermostat and a temperature sensor. It is recommended to choose a place for their placement in such places, de as simple as possible and handily pick up the place, tying up the change of the robotic system. Most of the time, stinks are installed at a height of at least 0.3 m from the ground.
A niche for fastening visverdlyuetsya behind an additional perforator with a special variable nozzle. In order to stretch the cable of life and heating rods, you can go through an okremy channel at the wall. Zahist vіd vologa zdіysnyuєtsya for the help of corrugated pipes. It is possible to pick up the threads of lively veins, looking at the table below:
| Conductor material | Peretin lived, mm | Maximum strum navantazhennya, A | The maximum total intensity of the charge, kW |
|---|---|---|---|
| Mid | 2*1,0 | 16 | 3,5 |
| Mid | 2*1,5 | 19 | 4,1 |
| Mid | 2*2,5 | 27 | 5,9 |
| Aluminum | 2*2,5 | 20 | 4,4 |
| Aluminum | 2*4 | 28 | 6,1 |
It is also planned to install a heat source at a place with a high indicator of moisture content (bath room, shower room, sauna), place a thermostat and a temperature sensor at a land place.
Cable layout
Before that, in order to lay the heat on the base, it is necessary to stretch one end of the heating element to the plot, on which the thermostat will be adjusted. Having fastened yoga on the mounting line, lay the seam straight into it. The installation of the cable is to be carried out evenly without overlap and overlap. Report about the correct laying of the cable to marvel at this video:
Mounting the cable is shorter in gum slippers
As it was said earlier, between parallel swarms, you can be no less than 8 cm. With this, in the months of virgins, the stench is not to blame for sharply bending over.
The assembly line is guilty of roztashovuvatsya by the regulator. Do-it-yourself installation of electrical heating can be accompanied by possible shortcomings or cable insulation with rough patches. In order to hide someone, put on clothes for the vikonnanny robit gumov captsi, or else, what can m'yaku gumov pіdoshvu.
It is allowed to cover the dart with plywood or cardboard.
Install an electric temperature sensor, if necessary, order it from the tip of the tube; In such a rank, you will be zdіysnyuvatsya zakhist vіd clogging with cement rozchin when pouring screeds.
Kіnets is guilty of mounting on the vіdstanі not closer than 50 cm from the wall. Outside the radius of the twist of the tube, which should be led, it is necessary especially relatively, so it can bend over. The corrugated tube is fixed and installed at the sensor, it is mounted on the same wall in the windings of the rod. The mounting channel, after being connected, is smeared with fresh cement or alabaster.
Before that, how to fill the screed or lay the material for the pidlog, it is necessary to reconsider the pidlog with the electric heating. The order of action is applied at the supply of voltage with a minimum tension of a stretch of no more than 5 minutes.
Having changed, after the system starts to warm up, you can step by step increase the tension to the middle indications.
Installation of ICH heat supply
Knowing that, as a result of the warmth of the podlog, you can independently edit the installation of other materials, including infrared mothers. The advantage of their victory is the possibility of becoming a heating element without a screed without intermediary under the finish coating. The details of laying the slinky can be seen from this video:
The process is much simpler, lower installation of a cable heating attachment, so the possibility of doing such a trick with your own hands is practical for a skin sack.
The installation of electrical heating sub-logs is based on the subsequent heating of the heating mats on the surface and connected to the living room with obov'zkovymi passage through the thermostat and temperature sensor. In case of any trace of damage, that the fabric of the thermopile is less likely to be directly marked, seen by a dotted line. I have worked out according to another principle before the material is zipped.
The gap between the sheets of ik-floor may be not less than 5 - 10 mm Krym tsgogo, є osoblivi vimogi, how to mount infrared canvases one by one. The size of the gap between them is due to buti in the range of 5 to 10 mm. Krіm tsgogo, be it as if the material was created under a straight cut, it was fenced, it was brought to the level of the internal structure of the heating elements.
Electricity is connected to the parallel connections of all smugs. After that, the temperature controller and the temperature sensor are turned on, without interfering on the heat-insulating lining. If you put yoga in another place, the indications, as if they were shown, will be wrong.
The test launch of the electrical wiring is carried out in the same way as the previously described method of re-checking the cable heating wiring.
Installation of thermomats It is planned to install a heating pad, but there are no similar works, the best option for choosing would be the installation of heating mats. Perevaga, yak maє їх attachments to analogues, favors the ease of installation.
You will not need to worry about how to install the system and connect it to the lifeline. To finish, just lay yoga on the surface in the right direction. Krіm tsgogo, there is no need to see another kіntsya in the space on the cob of the layout.
After connecting the circuit to the cable, you can lay a kahel or a laminate Do-it-yourself laying of warm underlays with different thermomats is allowed under the feet with kahl or laminate. In any case, after the system has been overhauled, you can proceed to the laying of the sub-logic cover.
The only thing that can be done in front is the necessity of laying the thermomat on the basis of gluing to the base for additional special glue prepared on the basis of epoxy resins. This is necessary for avoiding the sound of matting when laying tiles or laminate. The thinness of the laying of the heating mat is marveled at by your report video:
Electric supply, made with warm mats, it is very simple in installation and low maintenance.
First choose the method of additional heating, which you will install in the booths, it is necessary to call all the pros and cons of these technologies. It is possible to lay the electric heat under the bed in many ways, using different technologies. To choose from them, the Vlasnik himself will choose, but it is recommended to equalize the characteristics of the outbuildings.
Regardless of the fact that the electrical installations near the apartment or the booth, a positive result won't hurt for a long time. The quiet microclimate of the accommodation, the ability to walk in the cold season on a warm cough and walk out of the bathroom, step not on the cold bed, but on the receiving heat - all these are positive characteristics of the systems, as you can evaluate yourself by installing it at your own booth.
